TSSM: Three-State Switchable Memristor Model Based on Ag/TiOx Nanobelt/Ti Configuration

Xiaoyue Ji, Donglian Qi, Zhekang Dong, Chun Sing Lai, Guangdong Zhou, Xiaofang Hu

Introduction

Memristors, often described as the "fourth fundamental circuit element," are essential components for the next generation of neuromorphic computing and AI hardware. However, widely used mathematical models, such as the HP memristor model, frequently rely on idealized assumptions that fail to account for real-world environmental impacts. One of the most significant factors is environmental humidity, which can drastically alter the internal physics and electrical behavior of devices like the Ag/TiOx (Silver/Titanium Oxide) memristor.

Device Architecture and Humidity States

To address this gap, researchers have developed the Three-State Switchable Memristor (TSSM) model. This framework is based on physical Ag/TiOx nanobelt/Ti devices fabricated through hydrothermal synthesis and sputtering. The core of the TSSM model lies in its ability to capture how water molecules in the air interact with oxygen vacancies on the material's surface, fundamentally changing the device's functional state.

Schematic of the Ag/TiOx device structure and its interaction with atmospheric water molecules.

The study identifies three distinct behavioral states triggered by relative humidity (RH):

  1. Nonstandard Faradic Capacitance (NFC): At 0% RH, ions are essentially "locked," and the device behaves as a non-standard capacitor.
  2. Battery-Like Capacitance (BLC): At moderate humidity (35%–45% RH), water adsorption triggers electron transfer, creating a transitionary battery-like effect.
  3. Resistive Switching (RS): At high humidity (95%–100% RH), strong coupling between ions and electrons enables the full resistive switching required for memory and logic applications.

The TSSM Mathematical Framework

The TSSM model provides a PSPICE-compatible mathematical framework that utilizes state variables and window functions to represent these transitions. By employing Gradient Descent optimization, researchers fine-tuned parameters such as conductivity and threshold voltages against experimental data. This approach allows a single set of equations to represent three fundamentally different electrical components simply by switching parameter sets.

Results and Logic Verification

The TSSM model demonstrates exceptional accuracy, achieving a fitting precision of over 99.88% across all states. In the high-humidity Resistive Switching state, the Root Mean Squared Error (RMSE) was as low as 0.03%.

I-V characteristic curve of the memristor in the high-humidity Resistive Switching (RS) regime.

A key finding of the experimental characterization is the dramatic scaling of current levels. As humidity increases from dry to saturated conditions, current levels jump by orders of magnitude—from nanoamperes (nA) in the NFC state to milliamperes (mA) in the RS state. To verify the model's practical utility, simulations were conducted for "memristor-only" logic gates. The TSSM model successfully implemented basic Boolean logic (AND and OR gates) with fast response speeds, confirming its potential for robust circuit design in varying environments.

Conclusion and Future Outlook

The TSSM model reveals that humidity is not merely environmental interference but acts as a functional toggle for memristive devices. While the current model requires manual state selection, future iterations aim to treat humidity as a continuous input variable. Additionally, further research is needed to deepen the physical description of the chemical-electrical links and to test the model within large-scale neuromorphic networks. This work paves the way for more reliable memristor-based logic and neuromorphic systems capable of operating outside strictly controlled laboratory settings.

Summary updated

Abstract

Memristive technologies are attractive due to their nonvolatility, high density, low power, nanoscale geometry, nonlinearity, binary/multiple memory capacity, and negative differential resistance. For memristive devices, a model corresponding with practical behavioral characteristics is highly favorable for the realization of its neuromorphic system and applications. In this paper, we propose a novel memristor model based on the Ag/TiOx nanobelt/Ti configuration, which can reflect three different states (i.e. original stage, transition stage, and resistive switching state) of the physical memristor with a satisfactory fitting precision (greater than 99.88%). Meanwhile, this work gives (1) an insight onto the electrical characteristics of the memristor model under different humidity conditions; (2) the influence of the water molecular concentration on the memristor behavior, which is of importance for the memristor fabrication and subsequent applications. For verification purposes, the proposed three-state switchable memristor is applied into the memristor-based logic implementation. The experimental results demonstrate that the constructed circuit is able to realize basic Boolean logic operations with fast response speed and high efficiency.
BibTeX
@article{ji2021tssm,
  author = {Xiaoyue Ji and Donglian Qi and Zhekang Dong and Chun Sing Lai and Guangdong Zhou and Xiaofang Hu},
  title = {{TSSM: Three-State Switchable Memristor Model Based on Ag/TiOx Nanobelt/Ti Configuration}},
  journal = {Int. J. Bifurc. Chaos},
  year = {2021},
  url = {https://openreview.net/forum?id=5ivxJmhFUQ},
}
Figure