Abstract
Transmitting data using the phases on reconfigurable intelligent surfaces (RIS) is a promising solution for future energy-efficient communication systems. Recent work showed that a virtual phased massive multiuser multiple-input-multiple-out (MIMO) transmitter can be formed using only one active antenna and a large passive RIS. In this paper, we are interested in using such a system to perform MIMO downlink precoding. In this context, we may not be able to apply conventional MIMO precoding schemes, such as the simple zero-forcing (ZF) scheme, and we typically need to design the phase signals by solving optimization problems with constant modulus constraints or with discrete phase constraints, which pose challenges with high computational complexities. In this work, we propose an alternative approach based on Sigma-Delta ($\Sigma\Delta$) modulation, which is traditionally famous for its noise-shaping ability. Specifically, first-order $\Sigma\Delta$ modulation is applied in the spatial domain to handle phase quantization in generating constant envelope signals. Under some mild assumptions, the proposed phased $\Sigma\Delta$ modulator allows us to use the ZF scheme to synthesize the RIS reflection phases with negligible complexity. The proposed approach is empirically shown to achieve comparable bit error rate performance to the unquantized ZF scheme.
Introduction
Reconfigurable Intelligent Surfaces (RIS) are arrays of passive elements capable of shifting the phase of incident electromagnetic waves. While typically deployed as "smart mirrors" to enhance coverage in dead zones, they can also function as active data transmitters by modulating their reflection phases. This paper explores a novel method to turn a passive RIS into an active transmitter without the high computational overhead typically associated with multi-user precoding.
System Architecture
The system model considers a single-antenna Base Station (BS) communicating with multiple users via an RIS with $N$ elements. This setup effectively creates a massive MIMO transmitter from a single active source. A common challenge in such systems is the presence of physical blockages that prevent direct line-of-sight communication between the BS and the users, necessitating the use of the RIS to redirect and modulate the signal.
To perform multi-user precoding, the system must determine the optimal phase shifts for hundreds or thousands of RIS elements. This usually involves solving complex optimization problems under constant modulus and discrete phase constraints—tasks that are computationally prohibitive for real-time applications.
Spatial Sigma-Delta Modulation
The proposed solution moves away from iterative optimization toward a signal processing heuristic: spatial Sigma-Delta ($\Sigma\Delta$) modulation. Traditionally used in hardware like Analog-to-Digital Converters (ADCs) to shape temporal noise, the authors adapt this technique to the spatial domain across the physical elements of the RIS.
Key Components
- Spatial Noise Shaping: Instead of treating quantization error as random noise affecting all users, the $\Sigma\Delta$ loop "pushes" this noise into specific spatial frequencies (angles) where no users are located.
- Angle-Steering: By introducing a phase-shifting term in the feedback loop, the system can "steer" the noise-free "notch" of the modulator toward the angular sector occupied by the users.
- $\Sigma\Delta$-ZF Precoding: The system takes a standard Zero-Forcing (ZF) precoding vector and passes it through the spatial $\Sigma\Delta$ modulator to generate discrete phase shifts for the RIS elements.
- Dithering and Overloading: To maintain performance with low-resolution hardware (e.g., 2-bit phases), techniques like subtractive dithering and controlled overloading are used to prevent the formation of an error floor.
Performance and Insights
The most significant insight of this work is the Space-Time Duality. Just as a temporal $\Sigma\Delta$ filter shapes noise in the frequency domain, a spatial $\Sigma\Delta$ filter shapes noise in the angular domain. This recursive feedback approach allows the phase for each element to be calculated based only on the previous element's error, resulting in negligible computational complexity compared to iterative optimization.
Simulation results indicate that with 16 discrete phase levels ($L=16$), the $\Sigma\Delta$ approach achieves a Bit Error Rate (BER) nearly identical to an ideal unquantized system. Even with coarse 2-bit quantization, the system avoids the typical error floors through effective noise shaping.
Conclusion and Future Work
The proposed spatial $\Sigma\Delta$ modulation offers a low-complexity path toward high-performance RIS-based transmission. Future research will focus on extending this logic from 1D Uniform Linear Arrays to 2D planar arrays and addressing scenarios where users are widely scattered, potentially requiring wider or multiple noise-shaping notches.
Summary updated