Translational medicine: What views and challenges do the fracture mapping?

Guang Shi, Wei Liu, Xiu yun Su, Xi yu CaiResearch 2021 · DOI

Abstract

Translational medicine (TM) serves as a vital bridge between basic science and clinical application. This systematic review evaluates the current state of fracture mapping (FM) in orthopedics to clarify its clinical insights and the challenges it faces. Following PRISMA guidelines, 28 articles were selected from an initial pool of 2,777. Results indicate that FM is predominantly applied to lower limbs (60.71%) and significantly aids in preoperative planning (42.86%) and identifying specific fracture patterns (32.14%). While FM shows great promise for describing fracture morphology and guiding treatment, its clinical application remains limited by a lack of standardization.

Introduction: The Visualization Gap in Orthopedics

Orthopedic surgeons frequently encounter complex, multi-fragmentary fractures that are difficult to fully comprehend using traditional 2D X-rays or individual 3D CT scans. Standard classification systems often fail to capture the mechanical nuances of how bone breaks under specific loads. Fracture mapping (FM) addresses this by superimposing fracture lines from multiple patients onto a standardized anatomical template, creating a "heatmap" of injury patterns. This paper quantifies the current use of FM, identifying its primary anatomical targets and the hurdles to its widespread adoption.

Methodology

The authors conducted a systematic review following PRISMA guidelines, searching databases including PubMed, Scopus, and Web of Science through December 2020. From 2,777 retrieved articles, 28 met the inclusion criteria. These studies were analyzed based on anatomical site and clinical objective, such as preoperative planning or morphological analysis.

Key Findings: Anatomical Focus and Growth

The review revealed a strong emphasis on lower limb injuries, which accounted for over 60% of the literature. This focus is driven by the need for extreme anatomical precision in weight-bearing joints like the knee and ankle to prevent long-term complications such as arthritis.

Distribution of fracture types identified in the systematic review, highlighting the prevalence of tibial plateau and intertrochanteric fractures.

The data shows that the tibial plateau (approx. 18%) and intertrochanteric regions (approx. 14%) are the most frequently mapped areas. Furthermore, the field is experiencing rapid growth.

Annual publication trends showing the exponential increase in fracture mapping research from 2009 to 2020.

As shown in the figure above, interest in FM has surged, with publications increasing from a single study per year in the early 2010s to eight per year by 2020, suggesting the field is reaching a tipping point.

Clinical Utility and Future Directions

Fracture mapping has evolved from a purely descriptive tool into a functional asset for clinical practice. Approximately 42.86% of the reviewed studies utilized FM to guide preoperative planning, helping surgeons optimize the placement of fixation hardware. Another 32.14% used it to identify recurring fracture patterns that traditional classifications might miss.

Despite its potential, several challenges remain:

  • Lack of Standardization: There is no universal protocol for creating these maps, leading to data variability.
  • Clinical Integration: FM is currently used more as a retrospective research tool than a real-time clinical aid.
  • Need for Guidelines: Future research must focus on prospective studies to prove that FM-guided surgery improves patient outcomes, such as recovery speed and complication rates.

Conclusion

Fracture mapping represents a promising frontier in translational orthopedics. By providing a "big picture" view of bone failure, it offers significant advantages for classification, preoperative planning, and the development of new fixation concepts. However, establishing formal guidelines and standardized protocols is essential for FM to transition from a research interest into a standard clinical tool.

Summary updated

Abstract

Abstract BackgroundTranslational medicine(TM)is a bridge between basic science and clinical medicine. The purpose of this study is to systematically review the literature with respect to fracture mapping(FM) in orthopedics, to clarify what insights and challenges facing FM. MethodsA systematic review was conducted according to PRISMA guidelines. We systematically searched the PubMed, Scopus, IEEE Digital Library, Web of Science database and references of relevant studies, from the establishment of the database through December 2020, for any and all data regarding the application of FM in orthopedics. ResultsA total of 2777 articles were retrieved, and 28 articles met the inclusion criteria. The application of fracture FM in orthopaedics was as follows: upper limbs (n=10, 35.71%), lower limbs (n=17, 60.71%), thoracolumbar spine (n=1, 3.58%). FM guided preoperative planning (n = 12, 42.86%), and conduce to identify the specific patterns of fractures (n=9, 32.14%), and illustrated the fracture morphology and guided clinical treatment (n=7, 25.00%). ConclusionFM represents a promising technique for describing the morphology of fracture. Moreover, potential promotion classification, preoperative planning, development of fixation concepts, and analysis of internal structure, but its clinical application is still limited. Thus, much further research is needed to determine the potential advantages of this new technique. If possible, guidelines are needed to facilitate the development of FM with regard to the required for developing this technic.
BibTeX
@inproceedings{shi2021translational,
  author = {Guang Shi and Wei Liu and Xiu yun Su and Xi yu Cai},
  title = {{Translational medicine: What views and challenges do the fracture mapping?}},
  booktitle = {Research},
  year = {2021},
  doi = {10.21203/rs.3.rs-629408/v1},
}
Figure