Abstract
Concentrated solar power is one of the most promising techniques for significantly reducing the consumption of fossil fuels. In this paper, a quasi-two-dimensional tracking solar concentrator-module heliostat (M-H) collector and its tracking mechanism are discussed. Compared to the traditional two-dimensional tracking method, the M-H system only tracks the azimuth angle of the sun in real time, while the other dimension, the elevation angle, is changed once a day. This tracking method makes it possible to achieve low-cost, precise, and robust tracking. To quantitatively determine the efficiency, the cosine loss of this system is calculated. The result indicates that the cosine loss of the M-H collector is as low as 1%.
Introduction
Concentrated Solar Power (CSP) is a critical technology for the transition to renewable energy, primarily due to its ability to integrate thermal energy storage. This allows for a more stable and dispatchable power output compared to standard photovoltaic systems. However, the economic viability of CSP is often hindered by the complexity and cost of heliostats—mirrors that must precisely track the sun's movement to focus light onto a central receiver.
Traditionally, engineers choose between two tracking paradigms:
- Two-dimensional tracking: Offers high optical accuracy and minimal energy loss but requires complex, heavy machinery and significant power to drive two axes continuously.
- One-dimensional tracking: Reduces mechanical complexity and cost but suffers from substantial "cosine loss," where the effective mirror area decreases as the sun hits at an angle.
This study proposes a "quasi-two-dimensional" approach that bridges these two methods, aiming for the efficiency of 2D tracking with the simplicity of a 1D system.
The Module-Heliostat (M-H) Tracking Mechanism
The researchers introduce the Module-Heliostat (M-H) collector, which utilizes two axes operating on different timescales to optimize performance.
- The Polar Axis: This axis is aligned parallel to the Earth’s rotational axis. It tracks the "hour angle" (the sun’s daily east-to-west movement) in real-time.
- The Season Axis: Perpendicular to the polar axis, this axis accounts for the "declination angle" (the sun’s north-south seasonal shift).
Because the sun’s seasonal declination changes by less than 0.3 degrees per day, the M-H system treats this as a daily constant. The seasonal axis is adjusted only once per day, significantly reducing the mechanical demand and power consumption of the tracking motors. A key geometric insight of this system is that if the seasonal declination changes by $\delta$, the mirror only requires a rotation of $\delta/2$ to maintain its focus on the target.
Mathematical Modeling of the Cosine Effect
To validate the efficiency of this simplified tracking method, the authors developed a mathematical model to calculate the cosine effect—the ratio of the mirror's effective reflective area to its actual physical area.
The model utilizes vector normalization and rotation matrices to simulate the reflection of sunlight from a panel of 300 small mirrors (each 10cm x 10cm). By analyzing the relationship between the incident sun vector ($S$), the mirror normal ($N$), and the target vector ($T$), the researchers could precisely quantify the energy lost by not tracking the seasonal declination in real-time.
Results and Performance Analysis
The study utilized geographic and meteorological data from Albuquerque, New Mexico, to simulate performance over a full 365-day cycle. The key findings include:
- Minimal Cosine Loss: The calculated cosine loss for the M-H collector is approximately 1%. Specifically, the optical efficiency was found to be 99.7% when normalized against the equinox.
- High Concentration Ratio: Despite the simplified tracking, the system achieves a focus ratio of over 200x, which is sufficient for high-temperature thermal power generation.
- Performance Parity: The results demonstrate that a single daily adjustment for seasonal declination provides energy efficiency nearly identical to continuous 2D tracking.
Conclusion
The Module-Heliostat (M-H) collector offers a robust and cost-effective alternative to traditional solar tracking systems. By leveraging the "slow" nature of seasonal solar movement, the quasi-2D tracking mechanism eliminates the need for continuous high-precision movement on a second axis without sacrificing significant optical efficiency. This simplification paves the way for lighter, more affordable heliostat arrays in large-scale CSP plants. Future work will likely focus on physical prototype testing to validate these theoretical gains under real-world environmental conditions, such as wind loads and mirror surface imperfections.
Summary updated