Towards Spatial Multiplexing in Wireless Networks within Computing Packages

Fátima Rodríguez-Galán, Elana Pereira de Santana, Peter Haring Bolívar, Sergi Abadal, Eduard Alarcón

Abstract

Wireless Networks-on-Chip (WNoCs) are regarded as a disruptive alternative to conventional interconnection networks at the chip scale, yet limited by the relatively low aggregate bandwidth of such wireless networks. Hence, any method to increase the amount of concurrent channels in this scenario is of high value. In this paper we present a feasibility study of compact monopole antenna arrays in a flip-chip environment at millimeter-wave and sub-terahertz frequencies. By means of a full-wave solver, we evaluate the feasibility to create, at will, concentrations of field in different spots of the chip. This way, we set the steps towards spatial multiplexing that enables concurrent multicast communications and also increases the aggregate bandwidth of the wireless network. Our results at 60 GHz show two clearly separable parallel channels that radiate simultaneously from two opposite corners of the chip, achieving a Signal-to-Interference Ratio (SIR) of around 40 dB, which proves that the channels are independent of each other even in such an enclosed environment. Further, we see potential to expand our approach to three or more concurrent channels, and to frequencies beyond 100 GHz.

Introduction

As modern computing moves toward "manycore" processors and heterogeneous "chiplet" designs, the physical wires connecting these components—Networks-on-Chip (NoCs)—are becoming a major performance bottleneck. Wireless Networks-on-Chip (WNoCs) have emerged as a solution to provide fast, long-range communication across a chip. However, WNoCs face a "bandwidth crunch" because antennas typically share the same frequency space within the tiny, enclosed environment of a chip package, leading to interference.

This research addresses the challenge of spatial multiplexing: creating multiple, concurrent, and non-interfering wireless channels within the cramped, reflective confines of a flip-chip package.

Conceptual view of wireless chiplet communication with steered beams.

Methodology

The study employed high-fidelity "full-wave" electromagnetic simulations using CST Microwave Studio. The researchers modeled a standard flip-chip package, including the silicon die, solder bumps, and a heat spreader.

Instead of traditional horizontal antennas, the design uses vertical monopoles implemented as Through-Silicon Vias (TSVs). These are compact and integrate well with existing chip manufacturing. A 4x4 array of these monopoles was designed, occupying only 1.18 mm² (approximately 1.18% of a standard 10x10 mm² chip). By adjusting the excitation phase of each antenna element—a technique known as beamforming—the system can concentrate the electromagnetic field in specific spots on the chip.

Results and Discussion

The simulations demonstrate that silicon, often considered a "lossy" medium, actually aids in spatial multiplexing. Its high permittivity allows for smaller antenna arrays, while natural attenuation helps dampen interference between adjacent spatial channels. Furthermore, the proximity of the package "walls" and the ground plane (solder bump layer) assists in shaping the beams toward the center of the chip.

Key findings include:

  • High Isolation: At 60 GHz, the system created two parallel channels with a Signal-to-Interference Ratio (SIR) of 40 dB, indicating exceptional independence between channels.
  • Beam Steering: By changing the phase distribution across the 16 elements, energy could be steered to different corners of the chip at will, effectively creating "virtual wires."
  • Frequency Scaling: The approach successfully scaled to 110 GHz, where antennas become even smaller and maintain favorable efficiency.
Electric field distribution showing beam steering to different chip corners (a and b).

Conclusion

This feasibility study proves that spatial multiplexing can significantly increase the aggregate bandwidth of wireless interconnects within computing packages. By leveraging reconfigurable intelligence at the transmitter and receiver ends, it is possible to support multiple concurrent spatial channels. Future work will explore hardware implementation of high-speed on-chip phase shifters and expansion into sub-terahertz frequencies beyond 100 GHz.

Summary updated

Abstract

Wireless Networks-on-Chip (WNoCs) are regarded as a disruptive alternative to conventional interconnection networks at the chip scale, yet limited by the relatively low aggregate bandwidth of such wireless networks. Hence, any method to increase the amount of concurrent channels in this scenario is of high value. In this direction, and since WNoC implies close integration of multiple antennas on a chip anyway, in this paper we present a feasibility study of compact monopole antenna arrays in a flip-chip environment at millimeter-wave and sub-terahertz frequencies. By means of a full-wave solver, we evaluate the feasibility to create, at will, concentrations of field in different spots of the chip. This way, we set the steps towards spatial multiplexing that enables concurrent multicast communications and also increases the aggregate bandwidth of the wireless network. Our results at 60 GHz show two clearly separable parallel channels that radiate simultaneously from two opposite corners of the chip, achieving a Signal-to-Interference Ratio (SIR) of around 40 dB, which proves that the channels are independent of each other even in such an enclosed environment. Further, we see potential to expand our approach to three or more concurrent channels, and to frequencies beyond 100 GHz.
BibTeX
@inproceedings{rodriguezgalan2022towards,
  author = {Fátima Rodríguez-Galán and Elana Pereira de Santana and Peter Haring Bolívar and Sergi Abadal and Eduard Alarcón},
  title = {{Towards Spatial Multiplexing in Wireless Networks within Computing Packages}},
  booktitle = {NANOCOM},
  year = {2022},
  url = {https://openreview.net/forum?id=4ubbWAFCRc},
}
Figure