Abstract
Due to the increasing complexity of Multi-Processor Systems on Chip (MPSoCs), system-level design methodologies have got a lot of attention in recent years. However, the significant gap between the system-level reliability analysis and the level where the actual faults occur necessitates a cross-layer approach in which the sufficient data about the effects of faults at low levels are passed to the system level. So far, the cross-layer reliability analysis techniques focus on a specific type of faults, e.g., either permanent or transient faults. In this work, we aim at proposing a cross-layer reliability analysis which considers different fault types concurrently and connects reliability analysis techniques at different levels of abstraction using adapters.
Introduction
As transistors shrink to accommodate the increasing power of Multi-Processor Systems on Chip (MPSoCs), hardware reliability becomes a critical concern. Modern chips are increasingly susceptible to environmental disturbances causing transient faults (e.g., random bit-flips) and wear-and-tear leading to permanent faults (e.g., hardware aging).
Current reliability analysis methodologies suffer from two primary issues:
- The Abstraction Gap: Low-level physical analysis is highly accurate but computationally prohibitive for complex systems. Conversely, high-level system analysis is fast but often lacks grounding in physical failure mechanisms.
- The Silo Problem: Existing tools typically address either transient or permanent faults in isolation. However, these faults interact; for instance, a permanent core failure renders transient fault analysis for that core obsolete.
Methodology
The proposed Cross-layer Reliability Analysis (CRA) framework organizes reliability assessment into a tree-based hierarchy, bridging the gap between low-level hardware physics and high-level system design. The framework relies on four key components:
- Compositional Reliability Nodes (CRNs): These act as modular "black boxes" encapsulating specific analysis techniques at a given abstraction level, such as gate-level aging models or system-level task schedulers.
- Decomposition: To manage complexity, the system is partitioned into sub-components (e.g., individual processor cores). Reliability is calculated locally before being aggregated.
- Adapters: These serve as the "glue" of the framework, translating data between levels. For example, an adapter can convert a high-level power trace into a temperature profile required by a low-level aging model.
- Integrated Tools: The framework integrates specialized tools like HotSpot for thermal and permanent fault modeling and Fault Injection for estimating soft error (transient) rates. These are combined using Success Trees to determine overall system health.
The CRA Framework Architecture
The core of the proposal is a hierarchical architecture that propagates fault effects from physical device levels up to the system level.
As shown in Figure 1, the framework operates across three distinct levels:
- Level I (System Level): High-level analysis of the entire MPSoC, calculating overall reliability $R(t)$.
- Level II (Component Level): Analysis of individual processors (e.g., proc. 1, proc. 2).
- Level III (Physical Level): Temperature-based and fault injection analysis using tools like HotSpot to generate temperature $T(t)$ and probability of failure $P_{tf}$ data.
A key innovation is the use of Adapters at the "articulation points" of the design flow. These adapters convert low-level physical data into probabilistic error functions that high-level tools can interpret. This allows for Concurrent Analysis, recognizing that while transient and permanent faults operate on different timescales (nanoseconds vs. years), they must be considered together. The framework can calculate a "reliability ratio" over time, identifying whether transient or permanent faults are the dominant threat at any given moment.
Discussion and Future Work
The CRA framework provides a modular and efficient approach to reliability. By using adapters and CRNs, researchers can swap specific analysis tools without redesigning the entire pipeline.
However, several challenges remain:
- Implementation Complexity: Synchronizing analyses across vastly different timescales is computationally challenging.
- Validation: Future work involves full-scale implementation on commercial MPSoCs to quantify the overhead of these adapters in real-time design environments.
- Scope Expansion: While currently focused on hardware-induced faults, future iterations could include software bugs or security-related vulnerabilities.
In conclusion, the CRA framework offers a path toward more holistic and accurate reliability modeling for the next generation of complex MPSoCs.
Summary updated