Ti–Zr–Ni and Ti–Hf–Ni quasicrystals and approximants as hydrogen storage alloys

P. C. Gibbons, Richard G. Hennig, V. T. Huett, K. F. KeltonJournal of Non-Crystalline Solids 2004 · DOI

TL;DR

This paper presents a detailed structural model for Ti-Zr-Ni quasicrystals, crucial for understanding their hydrogen storage capabilities. By combining experimental diffraction data with ab initio calculations, the researchers identified stable hydrogen binding sites and their energies, leading to an excellent fit with experimental pressure-composition isotherms. This work also highlights the potential of Ti-Hf-Ni alloys as superior hydrogen storage materials due to their ability to absorb hydrogen without forming detrimental crystalline hydride phases.

What Problem Does This Paper Address?

Hydrogen storage materials are critical for the development of clean energy technologies, such as fuel cell vehicles. Intermetallic alloys, particularly quasicrystals and their related crystalline phases (approximants), have shown promise due to their high hydrogen absorption capacity. However, a fundamental understanding of the atomic structure of these complex materials and how hydrogen interacts with them at a microscopic level is essential for designing more efficient and durable storage systems. Specifically, the Ti-Zr-Ni quasicrystal system, while known to absorb hydrogen, has lacked a detailed structural model that can accurately predict hydrogen behavior. Furthermore, the formation of crystalline hydride phases during hydrogenation can lead to irreversible degradation of the material, limiting its practical application. This paper aims to address these issues by developing a realistic structural model for Ti-Zr-Ni quasicrystals and investigating the hydrogen binding sites and energies, and then comparing the hydrogen storage behavior of Ti-Zr-Ni with Ti-Hf-Ni alloys.

Methods

The researchers employed a multi-pronged approach combining experimental techniques with theoretical calculations:

  • Structural Modeling: They developed a structural model for the stable Ti-Zr-Ni quasicrystal using an 8/5 rational approximant (RA) constructed via the canonical cell tiling method. This model was refined using X-ray and neutron powder diffraction data.
  • Ab Initio Total Energy Calculations: To validate and further refine the atomic positions, they performed ab initio total energy calculations using the Vienna Ab Initio Simulation Package (VASP). These calculations were carried out on small, periodic tilings containing 81 to 123 atoms, allowing atomic positions to vary to minimize energy.
  • Hydrogen Binding Energy Calculations: Interstitial sites within the 1/1 RA model were identified as potential hydrogen binding sites. The binding energies of hydrogen at these sites were computed using the VASP code, with hydrogen positions allowed to relax.
  • Pressure-Composition Isotherm (PCT) Analysis: Experimental PCT data for hydrogen absorption in Ti-Zr-Ni were used to validate the structural model and hydrogen binding energy calculations. An excess chemical potential, representing H-H interactions, was adjusted to fit the PCT data.
  • Material Synthesis and Hydrogenation: Ti-Zr-Ni and Ti-Hf-Ni alloys were synthesized by arc-melting high-purity elements. Rapidly quenched samples were prepared as ribbons. Hydrogenation experiments were conducted using a modified Sievert's apparatus at various temperatures.

Datasets

  • Experimental Diffraction Data: X-ray and neutron powder diffraction data were collected from Ti-Zr-Ni quasicrystal samples.
  • Experimental Pressure-Composition Isotherm (PCT) Data: Existing PCT data for Ti-Zr-Ni and Ti-Hf-Ni alloys were used for comparison and validation.
  • Ab Initio Calculations: Calculations were performed on small structural models of the quasicrystal.

Key Insights and Ideas

  • Realistic Structural Model: The paper successfully constructs a detailed, 3D structural model for the Ti-Zr-Ni quasicrystal that is consistent with its composition, density, and experimental diffraction data. This model is crucial for understanding the material's properties.
  • Hydrogen Binding Sites Identified: The study pinpoints specific interstitial sites within the quasicrystal structure where hydrogen is stable and quantifies their binding energies. This provides a microscopic understanding of hydrogen interaction.
  • PCT Data Limitations: The research demonstrates that while PCT data can be well-fitted by the model, it alone is insufficient to uniquely determine the distribution of hydrogen binding energies. This highlights the importance of combining experimental and theoretical approaches.
  • Ti-Hf-Ni as a Promising Material: A significant finding is that Ti-Hf-Ni alloys can absorb hydrogen at 250 °C without forming the detrimental crystalline hydride phase, which is observed in Ti-Zr-Ni. This suggests Ti-Hf-Ni could be a superior candidate for reversible hydrogen storage applications.
  • Elastic H-H Interaction: The negative excess chemical potential suggests an attractive H-H interaction, likely elastic in nature, which influences hydrogen clustering and behavior within the alloy.

Key Results

  • An 8/5 rational approximant model for Ti-Zr-Ni quasicrystals was developed and refined, showing good agreement with X-ray and neutron diffraction data (X² = 1.4, Rw = 5.1%).
  • Twenty-five interstitial sites in the 1/1 RA model were identified as stable for hydrogen, with binding energies in the range of [-0.88, -0.19] eV.
  • An excellent fit to existing pressure-composition isotherm (PCT) data for Ti-Zr-Ni was achieved using the developed model and an adjusted excess chemical potential.
  • A comparison of PCT isotherms at 350 °C for Ti-Hf-Ni and Ti-Zr-Ni showed similar vapor pressures, suggesting comparable site-energy distributions.
  • Crucially, Ti-Hf-Ni alloys hydrogenated at 250 °C did not exhibit any detectable crystal hydride phase, unlike Ti-Zr-Ni alloys under similar conditions.

Limitations and Future Work

  • Limitations of PCT Data: The paper explicitly states that PCT data alone cannot uniquely determine the distribution of H binding energies. This implies that further experimental or theoretical investigations might be needed for a more precise understanding of site occupancy.
  • Model Complexity: While the 8/5 RA model is described as realistic, the complexity of quasicrystalline structures means that further refinements or alternative modeling approaches might be explored.
  • Future Work: The authors suggest that the Ti-Hf-Ni alloy's ability to avoid hydride formation makes it a better candidate for hydrogen storage applications. Future work could focus on optimizing the composition and processing of Ti-Hf-Ni alloys for practical hydrogen storage systems, investigating the long-term cycling stability, and further elucidating the mechanism behind the absence of hydride formation.

Summary updated

BibTeX
@article{gibbons2004tizrni,
  author = {P. C. Gibbons and Richard G. Hennig and V. T. Huett and K. F. Kelton},
  title = {{Ti–Zr–Ni and Ti–Hf–Ni quasicrystals and approximants as hydrogen storage alloys}},
  journal = {Journal of Non-Crystalline Solids},
  year = {2004},
  doi = {10.1016/j.jnoncrysol.2003.12.024},
}

Loading related content...

Figure