Thermometry of photosensitive and optically induced electrokinetics chips

Feifei Wang, Lianqing Liu, Gongxin Li, Pan Li, Yangdong Wen, Guanglie Zhang, Yuechao Wang, Gwo‐Bin Lee, Wen J. LiMicrosystems 2018 · DOI

Abstract

Optically induced electrokinetics (OEK)-based technologies integrate high-resolution optical tweezers with high-throughput electrokinetic forces to manipulate biological and non-biological entities. However, the simultaneous application of optical and electrical energy can induce significant temperature increases, potentially damaging sensitive biological samples. This study systematically measures the temperature distribution in OEK chips using infrared (IR) thermometry, identifying how light color, illumination area, and AC voltage contribute to thermal gradients. These findings not only provide guidelines for safe bio-manipulation but also demonstrate how these induced gradients can be harnessed for fluidic hydrogel patterning via thermocapillary flow.

Introduction

Optically Induced Electrokinetics (OEK) has emerged as a versatile platform for micro- and nano-manipulation, enabling the parallel handling of cells, DNA, and nanoparticles. By projecting light patterns onto a photoconductive substrate under an alternating current (AC) field, researchers can generate localized dielectrophoretic forces. Despite its utility, the dual energy input—photons and electrons—inevitably leads to heat generation. For biological applications, maintaining physiological temperatures is critical; even minor deviations can alter cell behavior or cause irreversible damage. Prior to this work, a systematic understanding of how specific operational parameters influence the chip's internal thermal environment was lacking.

Experimental Methodology

The researchers utilized a standard OEK chip architecture consisting of a liquid layer sandwiched between a top indium tin oxide (ITO) glass electrode and a bottom substrate of hydrogenated amorphous silicon (a-Si:H) on ITO glass. To map the temperature distribution without disturbing the thermal field, the team employed high-resolution infrared (IR) thermometry using an ImageIR4320 camera.

Figure 4: Schematic of the OEK experimental setup (a) alongside IR thermal images showing the objective lens (b), the initial chip state (c), and the evolution of the thermal footprint over time (d).

This contactless approach allowed for real-time profiling of the substrate's surface temperature. To complement the experimental data, 3D Multiphysics simulations (COMSOL) were conducted to estimate the temperature gradients within the liquid layer, which are inaccessible to direct IR measurement.

Thermal Characterization and Key Insights

The study revealed several critical factors influencing the thermal state of the OEK chip. A baseline finding was that the microscope objective lens itself acts as a heat source, reaching approximately 32°C simply due to the passage of the projector's light.

The Impact of Light Color

One of the most significant findings is the role of wavelength. Shorter wavelengths, such as cyan and blue, induce much higher temperatures compared to longer wavelengths like red. This is attributed to the higher absorption efficiency of the a-Si:H substrate at these frequencies, where more photon energy is converted into phonons (heat).

Figure 3: (a) Temperature rise over time for different light colors, showing higher heat generation for shorter wavelengths. (b) Comparison of temperature measurements using IR thermometry and thermocouples.

Pattern Density and Electrical Effects

The research demonstrated that the average temperature within a projected area is primarily determined by the ratio of lighted regions to the total area, rather than the specific geometry of the pattern. Furthermore, the application of AC voltage introduces additional heat through Joule heating. For instance, a 20 $V_{pp}$ AC voltage was found to add approximately 2°C to the system's baseline temperature.

Applications: Turning Heat into a Tool

While heat is often a "bug" in biological manipulation, the researchers demonstrated it could be a "feature" for microfabrication. By intentionally creating light-induced temperature gradients, they triggered thermocapillary flow (the Marangoni effect). This phenomenon was used to drive liquid PEGDA hydrogel into precise patterns, which were subsequently cross-linked using UV light—demonstrating a novel, non-contact method for fluidic patterning.

Conclusion and Future Outlook

This systematic thermometric study provides a roadmap for optimizing OEK operations. While shorter wavelengths provide stronger manipulation forces, they also pose the highest thermal risk. Future developments in OEK technology will likely require integrated cooling solutions or the design of "athermal" chips to balance high-throughput manipulation with the stringent thermal requirements of live-cell applications.

Summary updated

Abstract

Optically induced electrokinetics (OEK)-based technologies, which integrate the high-resolution dynamic addressability of optical tweezers and the high-throughput capability of electrokinetic forces, have been widely used to manipulate, assemble, and separate biological and non-biological entities in parallel on scales ranging from micrometers to nanometers. However, simultaneously introducing optical and electrical energy into an OEK chip may induce a problematic temperature increase, which poses the potential risk of exceeding physiological conditions and thus inducing variations in cell behavior or activity or even irreversible cell damage during bio-manipulation. Here, we systematically measure the temperature distribution and changes in an OEK chip arising from the projected images and applied alternating current (AC) voltage using an infrared camera. We have found that the average temperature of a projected area is influenced by the light color, total illumination area, ratio of lighted regions to the total controlled areas, and amplitude of the AC voltage. As an example, optically induced thermocapillary flow is triggered by the light image-induced temperature gradient on a photosensitive substrate to realize fluidic hydrogel patterning. Our studies show that the projected light pattern needs to be properly designed to satisfy specific application requirements, especially for applications related to cell manipulation and assembly.
BibTeX
@inproceedings{wang2018thermometry,
  author = {Feifei Wang and Lianqing Liu and Gongxin Li and Pan Li and Yangdong Wen and Guanglie Zhang and Yuechao Wang and Gwo‐Bin Lee and Wen J. Li},
  title = {{Thermometry of photosensitive and optically induced electrokinetics chips}},
  booktitle = {Microsystems},
  year = {2018},
  doi = {10.1038/s41378-018-0029-y},
}
Figure