The way to standardize electronic tongue system using IEEE 1451.4

Dong-Jin KimJournal of Sensor Science and Technology 2005 · DOI

Abstract

The IEEE 1451.4 standard defines an architectural model for interfacing smart transducers for sensors and actuators, allowing analogue transducers to communicate identification and calibration data via a digital Transducer Electronic Data Sheet (TEDS). However, existing standard templates do not support the complex sensor arrays used in electronic tongue (E-Tongue) systems, such as potentiometric and voltammetric sensors. This paper presents a solution to standardize E-Tongue sensors and systems by extending the IEEE 1451.4 framework.

Introduction

Electronic tongues—arrays of electrochemical sensors designed to analyze complex liquids—are increasingly vital in food science, environmental monitoring, and clinical diagnostics. Despite their utility, integrating these sensors into digital systems remains a bespoke, manual process. The lack of a unified communication standard prevents "plug-and-play" interoperability between different manufacturers' components.

Overview of the IEEE 1451 smart transducer interface standard family.

The IEEE 1451 family of standards (shown in Figure 1) provides a foundation for smart transducer interfaces. Specifically, IEEE 1451.4 was created to allow simple analog sensors to describe themselves digitally. However, current TEDS templates are optimized for single-variable physical sensors like thermometers, failing to capture the multi-sensor metadata required for electrochemical analysis.

Proposed Methodology

To address these limitations, this research proposes a novel TEDS architecture specifically tailored for E-Tongue systems. Rather than a 1:1 mapping where each sensor requires its own TEDS, the proposed model uses a system-level approach to improve memory efficiency and data relevance.

Key Innovations

  • New Template ID (ID=43): A dedicated template for E-Tongue systems was defined to standardize the storage of electrochemical data.
  • Hierarchical Data Structure: The TEDS is organized into four functional blocks: Basic System Info (identifying measurement methods like potentiometric vs. voltammetric), Sensor Specifics (electrical properties), Environmental Limitations (pH ranges and concentration bounds), and Calibration Data.
  • Field Repurposing: To maintain backward compatibility with the 64-bit "Basic TEDS," the "Version Letter" field was repurposed to encode the specific sensing method used by the E-Tongue array.

System Architecture and Implementation

The proposed framework integrates the E-Tongue sensor array into a Transducer Interface Module (TIM) that communicates with a Network Capable Application Processor (NCAP).

End-to-end architectural model of the IEEE 1451.4 transducer interface and measurement system.

As illustrated in Figure 4, the 1451.4 Node contains the specialized TEDS, which is read by the Measurement/Control Device. This device hosts the NCAP and application code necessary to interpret the sensor signals. By using a single Basic TEDS for a 7-sensor array followed by multiple standard templates, the system significantly reduces the memory footprint compared to standard implementations.

Results and Discussion

The proposal was validated through a hardware prototype featuring a reference electrode and a 7-sensor array. The TEDS data was stored on an EEPROM chip integrated with the array.

Experimental results demonstrated successful "plug-and-play" functionality. A software GUI was able to automatically identify sensor types (e.g., "pH sensor," "Silver electrode") and retrieve specific calibration and limitation data without manual user input. Furthermore, the prototype successfully mapped sensor array outputs to specific taste profiles—Sour, Salt, Sweet, and Bitter—based entirely on the metadata stored in the new TEDS format.

Conclusion

By incorporating E-Tongues into the IEEE 1451.4 framework, these complex analytical tools can be treated as standard industrial sensors. While future work is needed to expand templates for specialized heavy-metal sensors and ensure long-term stability in harsh liquid environments, this standardization is a critical step toward the widespread adoption of automated liquid analysis systems.

Summary updated

Abstract

The IEEE 1451.4 standards defines an architectural model for interfacing smart transducers for sensors & actuators. This standard allows analogue transducers to communicate their identification and calibration data in a digital format. A digital format is called the TEDS (transducer electronic data sheet). However, the standard template TEDS of IEEE 1451.4 do not supports sensors to use in electronic tongue system, such as arrayed-potentiometric and voltametric sensors. In this paper, a solution to standardize sensors for E-Tongue (electronic tongue) and electronic tongue systems is presented.
BibTeX
@article{kim2005way,
  author = {Dong-Jin Kim},
  title = {{The way to standardize electronic tongue system using IEEE 1451.4}},
  journal = {Journal of Sensor Science and Technology},
  year = {2005},
  doi = {10.5369/jsst.2005.14.6.444},
}
Figure