TL;DR
This paper investigates how MoS2 coatings affect the subsurface stress distribution in angular contact ball bearings operating in ultra-low temperatures. By developing a numerical model, the researchers found that MoS2 coatings influence stress localization, particularly under increased load and traction, which is crucial for understanding bearing fatigue life in extreme environments.
What Problem Does This Paper Address?
Bearings in extreme environments like rocket engines and LNG pumps face ultra-low temperatures, where traditional liquid lubricants fail. Solid lubricants, such as Molybdenum Disulfide (MoS2), are essential in these conditions. However, there's a lack of research on how MoS2 coatings specifically impact the subsurface stress distribution within bearing raceways, a critical factor for predicting bearing lifespan according to the Lundberg-Palmgren (L-P) theory. This paper aims to fill that gap by analyzing these effects.
Methods
The study employs a numerical approach based on existing formulas to calculate the subsurface stress field within the inner raceway of a MoS2-coated angular contact ball bearing. This involves:
- Hertzian Contact Theory: Used as the foundation for calculating contact stresses.
- Superposition Principle: Combining stress fields from Hertzian contact and tangential frictional forces.
- Python Programming: Developing a custom script to perform these complex calculations and visualize the stress distributions.
- Traction Model: Incorporating a solid slip model (Gupta's model) to represent the traction coefficient of MoS2.
- Experimental Validation (Indirect): While the core is numerical, the study uses experimental data from ball-on-disk traction tests to inform the traction coefficient values used in the model.
Datasets
Not discussed in the paper. The study relies on theoretical formulas and parameters derived from existing literature and experimental tests (ball-on-disk traction tests with MoS2 coatings).
Key Insights and Ideas
- Traction Coefficient's Role: The traction coefficient, while having a minimal impact on the YZ-plane stress distribution, significantly influences the XZ-plane stress. This suggests that sliding friction is more dominant in the XZ plane, perpendicular to the rolling direction.
- Stress Localization with Traction: As the traction coefficient increases, stresses on one side of the XZ plane move away from the surface, while on the other side, they move closer, potentially concentrating near the surface.
- Load Amplifies Stress: Increasing the load intensifies subsurface stresses, causing the maximum shear stress and von Mises stress to become more concentrated and shift closer to the surface. This implies higher loads lead to increased risk of fatigue spalling.
- MoS2's Advantage: Compared to dry friction, the low traction coefficient of MoS2 significantly improves bearing fatigue life by mitigating stress concentration.
Key Results
- The study provides detailed contour plots of various stress components (orthogonal shear stress, von Mises stress) under different working conditions (varying traction coefficients and loads).
- Maximum Stress Values:
- The maximum subsurface von Mises stress is approximately 0.64P₀ (where P₀ is the maximum contact stress).
- The maximum orthogonal shear stress component τyz in the subsurface is approximately 0.25P₀.
- Stress Depth Profile: Subsurface von Mises stress and maximum subsurface shear stress initially increase with depth from the surface and then decrease.
- Traction Effects: For non-zero traction coefficients, stress fields tilt in the XZ plane, indicating a shift in dominant friction mechanisms.
Limitations and Future Work
- Model Simplification: The study acknowledges that applying liquid lubrication models to solid films is complex and that the numerical calculations are based on theoretical equations, which may not perfectly reflect all real-world conditions.
- Future Research Directions:
- Detailed exploration of how coating thickness affects subsurface stress.
- Experimental research on S-N curves (stress-life curves) for bearing materials with MoS2 coatings.
- Direct experimental fatigue life testing of bearings with MoS2 coatings.
- Further investigation into the combined effects of surface and subsurface origins on bearing fatigue life.
Summary updated