The effect of high salinity on the infectivity of H1N1 and SARS-COV-2 viruses

Kuan‐Che Feng, Jacob Myers, Kaitlyn Swayze, Fan Yang, Won‐Il Lee, Steffen Mueller, Ashhad Khan, Karin Hasegawa, Marcia Simon, Kalle Levón, Peng Zhang, Yuefan Deng, Miriam RafailovichBiofunctional 2023 · DOI

TL;DR

This study investigates the impact of high salt concentrations, mimicking drying respiratory droplets, on the infectivity of H1N1 and SARS-CoV-2 viruses. The findings reveal that high salinity has a minimal effect on viral infectivity and S-protein structure, suggesting that salt is not an effective antiviral agent, contrary to its antibacterial properties.

What Problem Does This Paper Address?

Respiratory viruses like influenza and SARS-CoV-2 are primarily transmitted through airborne droplets. As these droplets dry on surfaces (fomites), the concentration of solutes, including salt, increases significantly. This raises a critical question: how does this high salinity affect the viability and infectivity of these viruses, and could it be a factor in their persistence on surfaces? While salt is a well-known disinfectant for bacteria, its efficacy against viruses, particularly in the context of drying droplets, remains less understood. This research aims to bridge this knowledge gap by quantifying the impact of varying NaCl concentrations on viral infectivity and structural integrity.

Methods

The researchers employed a multi-pronged approach:

  • Plaque Assays: This standard technique was used to quantify the infectivity of H1N1 and SARS-CoV-2 viruses. Viruses were incubated in NaCl solutions of varying concentrations (0.0 M to 5.0 M) for one hour before being applied to cell cultures. The number of plaques (areas of cell death caused by viral infection) served as a measure of viral titer and infectivity.
  • 3D Molecular Imprinting: This novel technique was used to assess changes in the structure of the SARS-CoV-2 spike (S) protein. Sensors were created by imprinting the S-protein. The electrical response of these sensors was monitored after exposing the S-protein to different NaCl concentrations. Changes in the sensor's response would indicate conformational changes in the S-protein.
  • Molecular Dynamics (MD) Simulations: Using the GROMACS software on a supercomputer, the researchers simulated the behavior of the SARS-CoV-2 S-protein in NaCl solutions at concentrations ranging from 0.0 M to 1.5 M. This allowed for a detailed, atomistic-level analysis of protein structure and dynamics under varying salt conditions.

Datasets

Not discussed in the paper. The study utilized experimental viral samples (attenuated SARS-CoV-2 and H1N1) and simulated protein structures.

Key Insights and Ideas

  • Salt's Limited Antiviral Power: The most striking finding is that high salt concentrations, even up to 5M (significantly higher than physiological levels), have a surprisingly minimal impact on the infectivity of both H1N1 and SARS-CoV-2 viruses. This contrasts sharply with salt's well-established antibacterial properties.
  • Structural Stability of the S-Protein: The SARS-CoV-2 spike protein, crucial for viral entry into host cells, appears remarkably stable across a wide range of salt concentrations. Neither the molecular imprinting technique nor the MD simulations detected significant structural changes.
  • Implications for Surface Persistence: The resilience of these viruses to high salinity in drying droplets could help explain their ability to remain infectious on surfaces for extended periods, contributing to their transmission.
  • Validation Across Methods: The consistency between plaque assays, molecular imprinting, and molecular dynamics simulations lends strong support to the study's conclusions.

Key Results

  • Plaque Assays: Both H1N1 and SARS-CoV-2 viruses showed a log reduction in infectivity of less than one log after exposure to NaCl solutions up to 5M. For SARS-CoV-2, the log reduction was no larger than 0.1, and for H1N1, it was no larger than 0.8, regardless of salt concentration.
  • 3D Molecular Imprinting: No significant changes in the potentiometric response of S-protein imprinted sensors were observed after exposure to NaCl concentrations of 0.0 M, 0.15 M, and 5.0 M, indicating no substantial structural alterations.
  • Molecular Dynamics Simulations: Time series measurements of RMSD (Root Mean Square Deviation), SASA (Solvent Accessible Surface Area), and hydrogen bond counts showed no significant changes in S-protein conformation across NaCl concentrations from 0.0 M to 1.5 M. The RMSD remained relatively constant after 500 ns, and SASA changes were minimal.

Limitations and Future Work

  • In Vitro vs. In Vivo: The study was conducted under controlled laboratory conditions. While informative, the direct translation of these findings to complex biological environments in vivo requires further investigation.
  • Droplet Dynamics Complexity: The study focused on NaCl concentration. Real respiratory droplets contain a complex mixture of solutes (proteins, surfactants, etc.) that could influence viral stability in ways not captured by this study. Future work could explore the synergistic effects of these components.
  • Limited MD Concentration Range: While the MD simulations covered up to 1.5 M NaCl, the plaque assays extended to 5 M. Expanding MD simulations to higher concentrations could provide a more complete picture.
  • Focus on S-Protein: While the S-protein is critical, other viral components could also be affected by salinity. Future research could investigate the impact on other viral proteins or the viral genome.

The authors suggest that understanding the physical conditions that prolong viral viability on drying fomites is crucial for developing effective preventative measures and preservation techniques for viral samples in laboratory settings.

Summary updated

Abstract

Viral particles are transmitted via air-borne surfactant rich saline droplets. The drying dynamics of droplets reflect increased internal saline concentrations, impacting viability and use of salinity as an anti-viral disinfectant. Plaque assays were used to quantify the infectivity of H1N1 and SARS-CoV-2 viruses after being placed in NaCl solutions of different concentrations at ambient conditions. Changes in the structure of the SARS-CoV-2 spike protein after immersion in NaCl solutions were measured using the 3D molecular imprinting technique. In silico simulation of the S-protein structure in contact with different concentrations of NaCl was performed using GROMACS 2020.2 on the AiMOS supercomputer built with IBM POWER9. Plaque assays showed that both H1N1 and SARS-CoV-2 virus infectivity was changed by less than one log reduction after treatment with high salt solutions up to 5M. No change in structure was detected with the 3D molecular imprinted sensors even at the highest concentration. The results were confirmed using molecular dynamics simulations. We have found that incubation in NaCl solutions, up to 5M concentration, had only a minimal affect in reducing the infectivity of H1N1 and SARS-COV-2 viruses. In silico modeling and molecular imprinting measurements of the S-proteins indicated no change in molecular structure, consistent with maintaining infectivity. Hence in contrast to their anti-bacterial efficacy, high salt solutions are ineffective an anti-viral agent.
BibTeX
@inproceedings{feng2023effect,
  author = {Kuan‐Che Feng and Jacob Myers and Kaitlyn Swayze and Fan Yang and Won‐Il Lee and Steffen Mueller and Ashhad Khan and Karin Hasegawa and Marcia Simon and Kalle Levón and Peng Zhang and Yuefan Deng and Miriam Rafailovich},
  title = {{The effect of high salinity on the infectivity of H1N1 and SARS-COV-2 viruses}},
  booktitle = {Biofunctional},
  year = {2023},
  doi = {10.55092/bm20230005},
}
Figure