Abstract
As carbon capture and storage (CCS) initiatives scale globally, the long-term structural integrity of geological reservoirs remains a primary concern. This study investigates the physical and mechanical evolution of sandstone when exposed to supercritical CO₂ (scCO₂) and water. Utilizing non-destructive low-field nuclear magnetic resonance (LF-NMR) and dynamic mechanical testing, the research tracks how mineralization processes alter internal pore architectures. The findings reveal that scCO₂-water interactions lead to increased porosity—particularly within larger pore networks—and a corresponding reduction in compressive strength and stiffness. These results suggest that carbon sequestration is a dynamic process that significantly modifies the host rock's mechanical properties over time, necessitating robust monitoring for long-term storage security.
Introduction
Carbon sequestration involves the injection of supercritical CO₂ into deep underground formations, such as saline aquifers or depleted oil and gas reservoirs, typically composed of sandstone. While the chemical reactions between scCO₂, formation water, and rock minerals (mineralization) are well-documented, the physical consequences of these reactions on the reservoir's structural integrity are less understood.
There is a critical need for "time-lapsed" data to understand how the internal architecture (microstructure) and physical strength (mechanical properties) of sandstone evolve during storage. If the rock matrix weakens or the pore structure shifts significantly, it could compromise the security of the CO₂ storage site or unexpectedly alter its total capacity. This paper addresses these gaps by quantifying the relationship between chemical exposure and physical degradation.
Methodology
To observe the internal changes of sandstone without destroying the samples prematurely, the researchers employed low-field nuclear magnetic resonance (LF-NMR) alongside traditional mechanical testing.
LF-NMR Analysis
LF-NMR is a non-destructive sensing technique that measures the relaxation time of hydrogen atoms in fluids within the rock's pores. This measurement allows for the real-time visualization of pore size distribution and the detection of microcracks. By comparing NMR signals before and after various intervals of scCO₂-water exposure, the team quantified changes in the rock's internal "plumbing."
Mechanical Testing
In parallel with the microstructural analysis, the authors performed uniaxial compressive strength tests. These tests measured the rock's peak strength and elastic modulus (stiffness) as a function of exposure time, providing a direct link between microstructural changes and macroscopic mechanical behavior.
Key Insights and Discussion
The Evolution of Pore Architecture
The study found that the interaction between scCO₂ and minerals is not uniform across the rock matrix. Large pores and existing microcracks serve as the primary conduits for fluid flow, offering more surface area for chemical reactions. Consequently, these areas undergo more rapid alteration than smaller, isolated pores. This preferential reaction leads to a "porosity paradox": while the total void space increases—potentially increasing storage volume—it occurs through the dissolution of the mineral cements that provide the rock its structural strength.
Mechanical Weakening and Fracture Complexity
The most significant finding is the measurable decline in the rock’s mechanical performance. Exposure to the scCO₂-water mixture leads to a consistent decrease in both compressive strength and elastic modulus. Essentially, the sandstone becomes softer and more brittle.
Furthermore, the study observed a shift in how the rock fails under stress. As exposure time increases and the mineral matrix weakens, the rock tends to develop more complex and interconnected fracture networks upon failure compared to the simpler fracture patterns seen in "fresh" sandstone. This suggests that the long-term containment of CO₂ may be influenced by a changing geomechanical environment that favors the development of leakage pathways if the reservoir is over-pressurized.
Results
The experimental data provide a clear timeline of the physical toll of carbon mineralization:
- Increased Porosity: Chemical dissolution, particularly in larger pores, resulted in a measurable net increase in the rock's void space.
- Reduced Strength: A clear downward trend in compressive strength and elastic modulus was correlated with the duration of scCO₂-water exposure.
- Structural Mapping: The study successfully demonstrated that LF-NMR is an effective tool for monitoring in-situ changes in rock properties, mapping the transition from a solid mineral matrix to a more porous, mechanically compromised state.
Conclusion and Future Work
This research serves as a vital reminder that carbon sequestration reservoirs are not static tanks but dynamic geological systems. The mechanical weakening of sandstone over time must be integrated into risk assessment models for CCS projects.
Future research should expand on these findings by exploring:
- Mineralogical Variability: Investigating how different sandstone compositions (e.g., varying quartz, feldspar, or clay content) influence the rate of mechanical decline.
- Long-term Extrapolation: Developing models to translate weeks of laboratory data into the decadal or centennial scales required for permanent storage.
- Environmental Variables: Assessing how varying depths, pressures, and temperatures accelerate the weakening process in different geological settings.
Summary updated