Abstract
To explore the mechanism and effect of the intelligent charger of electric vehicle under the control of microcontroller (MCU), the working effect of the intelligent charger of electric vehicle was discussed by constructing the charger model of electric vehicle based on STC12C5204AD MCU and the simulation experiment method. The specific energy density of the battery for the charger under the action of STC12C5204AD, 8xC752, and C504 MCU and the charging times for the battery life under different single chip computers were mainly studied. Moreover, the effect and mechanism of the intelligent charger and the common charger were explored. The research results showed that the battery based on STC12C5204AD MCU had little effect on the change of specific energy of battery, the specific energy basically maintained the initial value, and the effect was prominent. Compared with 8xC752 and C504 MCU, STC12C5204AD MCU had the most prominent effect on delaying the decline of battery life under the same charging times. In contrast with the general charger, the intelligent charger would change its charging voltage according to the change of the rated voltage of the battery to maintain the maximum protection of the battery life. The ordinary battery could maintain a certain value without random change. To sum up, compared with the common electric vehicle charger, the intelligent charger has obvious advantages, which significantly improves the protection of the battery and delays the decline of it. The intelligent electric vehicle charger based on STC12C5204AD MCU has outstanding effect. The model of the intelligent electric vehicle charger based on STC12C5204AD meets the high standard requirements of the electric vehicle for the charger. The research on the intelligent charger of electric vehicle under the control of MCU has a positive effect on the follow-up research.
Introduction
As electric vehicles (EVs) become a global standard for reducing pollution, the efficiency and safety of charging systems have become critical bottlenecks. Traditional chargers often use fixed charging parameters that do not account for the battery's actual state. This leads to several issues, including battery damage from overcharging, reduced service life due to overheating and polarization, and general inefficiency as standard chargers cannot adjust to the battery's dynamic charge acceptance rate. This paper addresses these challenges by designing an intelligent system that adapts its output based on real-time feedback from the battery.
Methodology
Hardware Architecture
The system framework is centered on the STC12C5204AD MCU. The hardware utilizes a BUCK step-down circuit for voltage regulation and a UC3843 regulating circuit for Pulse Width Modulation (PWM) control. Integrated sensors monitor critical parameters such as voltage, current, and temperature to provide a closed-loop feedback system.
Three-Stage Charging Strategy
To optimize battery health and charging speed, the MCU implements a three-stage charging strategy:
- Constant Current Stage: Rapidly increases battery voltage while maintaining a stable current.
- Constant Voltage Stage: Maintains a steady voltage as the battery nears full capacity, allowing the current to taper off naturally.
- Floating Charge Stage: A low-voltage maintenance mode that keeps the battery topped off without causing damage.
Additionally, the MCU implements pulse charging to "depolarize" the battery, helping to remove chemical barriers that hinder charge absorption. The software, written in C, includes robust anti-interference measures such as median and average software filtering to ensure stability in electrically noisy environments.
Key Insights and Results
Dynamic Compensation and Safety
A critical insight of this design is dynamic temperature compensation. Since the required rated voltage decreases as battery temperature increases, the intelligent charger actively lowers the charging voltage as the battery warms. This prevents the system from exceeding critical electrolyte temperature thresholds (38°C–40°C), thereby preventing water loss and polarization.
Comparative Performance
Simulation experiments compared the STC12C5204AD MCU against older architectures (8xC752 and C504) and standard "dumb" chargers:
- Specific Energy Maintenance: Batteries charged with the STC12C5204AD system maintained a nearly flat specific energy density over five months, whereas older MCUs saw a significant decline (dropping from ~72 to ~62 units).
- Longevity: In tests exceeding 400 charging cycles, the intelligent charger maintained significantly higher battery life metrics compared to the 8xC752 and C504 models.
Conclusion
The intelligent electric vehicle charger based on the STC12C5204AD MCU demonstrates clear advantages over traditional charging systems. By implementing adaptive control and a multi-stage charging strategy, the system significantly improves battery protection and delays degradation. While the current study focuses on lead-acid chemistry, the underlying principles of dynamic feedback and intelligent regulation provide a strong foundation for future adaptations to Lithium-ion and other emerging battery technologies.
Summary updated