Technology and engineering test of filling goaf with coal gangue slurry

Shengrong Xie, Hao Pan, Wenzhe Gu, Lei Zhu, Yue Dong, Dongdong Chen, Tianqi Song, Zaisheng JiangScientific 2023 · DOI

Abstract

Based on the greening and low interference disposal requirements of coal gangue in high-yield and high-efficiency mines in Inner Mongolia and Shaanxi, a technology of filling goaf with coal gangue slurry is proposed. This paper clarifies the technical framework and expounds on the technological processes involved, establishing three types of slurry filling systems (ground centralized, coordinated, and underground centralized) and three grouting methods (low-level, adjacent-level, and high-level). Seven technology models are constructed, and their selection process is detailed. Engineering tests at Dahaize Coal Mine and Huangling No. 2 Coal Mine demonstrate the feasibility of this approach for green, low-interference disposal of coal gangue.

Introduction

Coal mining generates massive amounts of coal gangue, a carbon-containing solid waste. In China, over 7 billion tons are stockpiled in "gangue hills," occupying valuable land and causing water and soil pollution. While underground filling is the ideal disposal method, traditional solid or paste filling techniques are often too expensive or slow for high-efficiency mines, as they frequently require halting production. This research proposes a "low interference" framework for coal gangue slurry filling to achieve "zero discharge" without interrupting active mining operations.

Technical Framework and Methodology

The proposed technology transforms coal gangue into a pumpable slurry by crushing it into granular aggregate and mixing it with mine water, typically at a 70% concentration. This slurry is then injected into specific zones of the goaf—the empty space left after mining.

Technical framework of filling goaf with coal gangue slurry

The framework integrates three primary layout systems and three grouting methods to form seven distinct technology models, such as "ground centralized pulping + high-level grouting." The selection of a specific model depends on the mine's geological conditions and production requirements.

Technological Process

The engineering implementation is divided into three core subsystems: crushing, pulping, and pumping. The crushing system reduces gangue to a specific particle size, the pulping system mixes it with mine water to create a stable slurry, and the pumping system delivers it to the goaf via surface or downhole pipelines.

Technological process of the crushing, pulping, and pumping systems

Key Insights from Simulation and Field Tests

Physical simulation using laboratory-scale "box models" revealed critical behaviors of the slurry flow within the chaotic environment of a collapsed mine roof:

  • The "3–4 Times" Rule: Slurry effectively penetrates rock gaps only if the gap size is at least 3 to 4 times the maximum particle size of the slurry. Smaller gaps lead to aggregation and clogging.
  • Particle Grading: Slurry naturally sorts itself as it spreads; coarse particles settle early while fine particles travel further, ensuring that various void sizes are filled.
  • Low Interference: Utilizing pipelines and "adjacent-level" grouting allows waste disposal in mined-out areas while active mining continues several hundred meters away, solving the conflict between disposal and production.

Engineering Case Studies

Field tests were conducted at two major operations in Shaanxi to validate the models:

  • Dahaize Coal Mine: Implemented a coordinated ground-underground system with low-level grouting. It achieved a stable transportation flow rate of 1.94 m/s at 70% mass fraction, disposing of up to 600 tons per event without affecting coal production.
  • Huangling No. 2 Coal Mine: Utilized adjacent-level grouting with a 10:7 gangue-to-water ratio. The system maintained 8.0 MPa pump pressure, with single holes receiving over 700 m³ of slurry.

Conclusion and Future Directions

Engineering tests confirm the feasibility of coal gangue slurry filling as a green, low-interference disposal method. This technology provides a path toward "zero discharge" in high-yield mines. Future research should focus on the long-term geochemical stability of the slurry and the development of intelligent, automated control systems to optimize concentration and flow based on real-time goaf pressure sensors.

Summary updated

Abstract

Based on the greening and low interference disposal requirements of coal gangue in high-yield and high-efficiency mines in Inner Mongolia and Shaanxi, and by integrating the existing theories and technologies such as underground filling technology of coal gangue, mine yellow mud grouting technology, and the evolution law of mining overburden fractures, a technology of filling goaf with coal gangue slurry for green disposal of coal gangue is proposed. The principle and technical framework of the technology of filling goaf with coal gangue slurry are clarified. This paper expounds on the technological process of technology of filling goaf with coal gangue slurry, establishes three types of slurry filling systems, such as centralized ground layout, ground and underground coordinated layout, and centralized underground layout, and constructs three slurry filling methods, including low-level grouting, adjacent level grouting, and high-level grouting, forming seven kinds of technology models of filling goaf with coal gangue slurry, including ground centralized pulping + high-level grouting, ground centralized pulping + adjacent grouting, ground centralized pulping + low level grouting, ground and underground coordinated pulping + adjacent grouting, ground and underground coordinated pulping + low level grouting, underground centralized pulping + adjacent grouting, and underground centralized pulping + low level grouting, and gives the selection process of technology models of filling goaf with coal gangue slurry. Based on the different conditions and requirements of Haidaze Coal Mine and Huangling No. 2 Coal Mine, engineering tests were carried out on two different technology modes, namely, ground and underground coordinated pulping + low level grouting and ground and underground coordinated pulping + adjacent grouting, based on simulation tests of low level grouting and adjacent grouting. The tests prove the feasibility of filling goaf with coal gangue slurry and explore the way for the theoretical research of the technology of filling goaf with coal gangue slurry and greening and low interference disposal of coal gangue.
BibTeX
@inproceedings{xie2023technology,
  author = {Shengrong Xie and Hao Pan and Wenzhe Gu and Lei Zhu and Yue Dong and Dongdong Chen and Tianqi Song and Zaisheng Jiang},
  title = {{Technology and engineering test of filling goaf with coal gangue slurry}},
  booktitle = {Scientific},
  year = {2023},
  doi = {10.1038/s41598-023-47621-8},
}
Figure