Experimental Study on Cemented Tailings Backfill in a Copper Mine

Xin Li, Lijie Guo, Wenyuan XuAtlantis 2023 · DOI · OpenAlex

Abstract

As copper mines transition into deep mining stages, they encounter significant production and technical challenges, particularly regarding ground pressure control. This study details the transformation of an existing filling system into a high-concentration cemented tailings backfill system. Utilizing an underground mixing station and a self-flow filling process, the system incorporates advanced vertical sand bin fluidized slurry technology. On-site experimental trials were conducted with a slurry concentration of 67% and cement-to-sand ratios of 1:12, 1:8, and 1:6. Results confirmed that the system achieves stable sand release rates (up to 120 m³/h) and controllable slurry concentrations. The preparation capacity for cementitious slurry was verified at 12 m³/h, providing a stable and easily managed process for safe deep mining operations.

Introduction

In deep mining environments, the surrounding rock is subjected to immense structural stress. To mitigate the risk of collapses and maintain operational safety, engineers rely on backfilling—the process of filling empty stopes with waste material mixed with binding agents. This study addresses the limitations of an aging filling system in a specific copper mine, focusing on the implementation of a high-concentration cemented tailings process designed to withstand the high-pressure conditions of deep-earth extraction.

Methodology and System Transformation

The researchers implemented an underground mixing station self-flow filling process, which leverages gravity to transport slurry, thereby reducing reliance on high-powered pumping systems. The transformation involved several key technical upgrades:

  • Infrastructure Integration: The new mixing station was constructed underground to fully utilize the mine's original facilities, demonstrating a cost-effective modernization strategy.
  • Fluidized Slurry Preparation: A vertical sand bin fluidized device was employed to ensure a consistent mixture of dry tailings and water.
  • On-site Proportioning Tests: Three full-scale trials were conducted to verify performance. The team tested slurry concentrations of 65% and 67% against cement-to-sand ratios of 1:12, 1:8, and 1:6.
The underground mixing station and pipeline system used for the self-flow filling process.

To evaluate the structural integrity of the fill, samples were collected every 30 minutes during pouring to create test blocks. These blocks underwent Uniaxial Compressive Strength (UCS) testing after curing for 7 and 28 days.

Key Results and Analysis

The experimental data validated the system's design parameters and provided critical benchmarks for deep mining safety.

Operational Efficiency

The system achieved stable sand release amounts of 120 m³/h, 80 m³/h, and 60 m³/h, aligning perfectly with design expectations. The cement slurry preparation system maintained a steady and accurate capacity of 12 m³/h with concentrations ranging from 55% to 61%.

Structural Strength

The UCS tests revealed a direct correlation between slurry concentration and backfill strength. As shown in the experimental data, even a marginal increase in concentration from 65% to 67% significantly improved the load-bearing capacity of the material.

Uniaxial compressive strength (UCS) at 7 days across various cement-sand ratios and slurry concentrations.

At a 1:6 ratio and 67% concentration, the backfill reached a UCS of 0.32 MPa after 7 days, eventually reaching 0.58 MPa after 28 days. Notably, the researchers observed that the strength gain between day 7 and day 28 was substantially higher than the initial 7-day growth, indicating that the material's full structural contribution develops over several weeks.

Conclusion and Future Work

The transformation of the filling system has proven successful in providing high-quality filling materials while maintaining stable operational control. The manual sand release process is easily manageable, and the target slurry concentrations are consistently met.

However, the study identified areas for further optimization. Maintaining consistent sand storage in the bins is crucial to preventing drops in slurry concentration. Additionally, future engineering efforts will focus on pipeline durability, specifically addressing issues with pipe diameters and the use of soft rubber components that may struggle with long-term high-concentration flow. The mining team continues to collect longitudinal data to build a more robust understanding of long-term pressure resistance in deep-mining environments.

Summary updated

Abstract

A certain copper mine has entered deep mining.In order to solve the numerous production technical problems faced by deep mining and the shortcomings of the original filling system in the mine, the filling system will be transformed and a high concentration tailings cemented filling system will be established.The filling system is designed using the underground mixing station selfflow filling process, advanced vertical sand bin fluidized slurry making device, and a mixing station is constructed underground, fully utilized the original filling facilities of the mine.In order to control the ground pressure during deep mining, provide high-quality filling materials, and ensure safe and efficient mining operations, on-site inspections were conducted on the existing filling equipment and pipeline system.A trial mining site filling tailings ratio test was designed, with a filling slurry concentration of 67% and ratios of 1:12, 1:8, and 1:6.It was concluded that the current system's expected sand release amounts of 120m 3 /h, 80m 3 /h, and 60m 3 /h are basically accurate, and the sand release concentration is controllable.The preparation system for cementitious filling water slurry has a normal preparation capacity of 12m 3 /h (concentration of 55-61%) is accurate, the control process is stable and easy to be controlled.
BibTeX
@inproceedings{li2023experimental,
  author = {Xin Li and Lijie Guo and Wenyuan Xu},
  title = {{Experimental Study on Cemented Tailings Backfill in a Copper Mine}},
  booktitle = {Atlantis},
  year = {2023},
  doi = {10.2991/978-94-6463-312-2\_18},
}
Figure