Synthesis of SiC/SiO2 core–shell nanowires with good optical properties on Ni/SiO2/Si substrate via ferrocene pyrolysis at low temperature

Bo‐Yu Chen, Chong‐Chi Chi, Wen‐Kuang Hsu, Hao OuyangScientific 2021 · DOI

Abstract

In this study, high-density SiC/SiO₂ core-shell nanowires were synthesized on a nickel-coated SiO₂ (100 nm)/Si substrate using the chemical vapor deposition (CVD) method with a ferrocene precursor at 1000 °C—a significant reduction from the 1300–1600 °C typically required. This work provides an efficient strategy for producing SiC/SiO₂ nanowires with uniform morphology and enhanced optical properties. The Ni layer acts as a critical catalyst, lowering the decomposition temperature of hydrocarbon gases and improving growth quality. The resulting nanowires consist of single-crystal 3C structures with defects along the [111] direction. Photoluminescence (PL) spectra reveal a distinct blueshift caused by nanoscale silicon carbide polytypism from stacking faults. These faults, confirmed at a 19% density via X-ray diffraction (XRD), facilitate a transition from an indirect to a direct bandgap, resulting in strong emission intensity. Finally, an approximate model based on the vapor-liquid-solid (VLS) mechanism is proposed to explain the growth of these core-shell structures.

Introduction

Silicon carbide (SiC) is a premier wide-bandgap semiconductor, essential for high-temperature and high-power electronics. However, its widespread adoption is hindered by high synthesis costs and poor light-emission efficiency due to its inherent indirect bandgap. Traditional Chemical Vapor Deposition (CVD) requires extreme temperatures (up to 1600 °C) to decompose precursors, making the process energy-intensive. This research demonstrates a low-temperature synthesis route at 1000 °C that simultaneously engineers the nanowires' internal structure to convert SiC into an efficient light emitter.

Experimental Methodology

The researchers employed a CVD approach utilizing a silicon wafer substrate coated with 100 nm of SiO₂ and a 40 nm thin film of Nickel (Ni). Ferrocene served as the organometallic precursor, providing both carbon and iron. The Ni layer is the pivotal component of this setup, serving as a catalyst that significantly lowers the energy barrier for precursor decomposition. Characterization was performed using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD), with structural simulations conducted via GSAS-II software to quantify atomic misalignments.

Structural and Phase Analysis

XRD analysis confirmed the presence of the 3C-SiC crystalline phase alongside various metal silicides (NiSi₂, Ni₂Si, NiSi, and NiFeSi). A key finding was the identification of significant stacking faults within the SiC lattice. These "defects" are not detrimental; rather, they are responsible for the unique optical properties observed in the nanowires.

XRD pattern of the as-synthesized nanowires highlighting the 3C-SiC phase and the presence of stacking faults.

Simulation of the XRD data revealed a stacking fault density of approximately 19%. This density is identified as the "sweet spot" for maximizing photoluminescence intensity by inducing nanoscale polytypism, which effectively folds the electronic bands to create a direct bandgap behavior.

Morphology and Growth Mechanism

The synthesized structures are core-shell nanowires, featuring a crystalline SiC core protected by an amorphous SiO₂ sheath. High-resolution imaging and elemental mapping confirmed the presence of a catalyst particle at the tip of each nanowire, supporting the Vapor-Liquid-Solid (VLS) growth mechanism. In this process, the Ni film melts into droplets that absorb precursor gases until supersaturation occurs, at which point the solid SiC nanowire precipitates and grows.

TEM and STEM-HAADF imaging showing the core-shell morphology and the chemical composition of the catalyst tip via EDS.

Optical Performance and Insights

The nanowires exhibit a strong violet photoluminescence peak at 397 nm, a significant blueshift from the 525 nm green emission typical of bulk SiC. This shift is attributed to the quantum confinement and the bandgap modification induced by the stacking faults. The researchers also found that the optical properties are tunable; by reducing the Ni catalyst film thickness, the nanowire diameter can be decreased, further refining the emission characteristics. While oxygen vacancies in the SiO₂ shell can introduce spectral noise, chemical etching (e.g., with HF) can be used to sharpen the emission peaks.

Conclusion

By combining a nickel catalyst with a ferrocene precursor, this study successfully lowered the synthesis temperature of SiC/SiO₂ nanowires to 1000 °C. The intentional integration of stacking faults transformed the material's optical profile, resulting in high-intensity violet light emission. This approach offers a scalable, energy-efficient pathway for developing SiC-based nanophotonic devices capable of operating in extreme environments.

Summary updated

Abstract

In this study, the high-density SiC/SiO<sub>2</sub> core-shell nanowires were synthesized on the nickel coated SiO<sub>2</sub> (100 nm)/Si substrate by chemical vapor deposition (CVD) method with ferrocene precursor at temperature 1000 °C compared to previous studies (1300-1600 °C). The present work provides an efficient strategy for the production of SiC/SiO<sub>2</sub> nanowires with uniform morphology and good optical properties, where the Ni layer plays important roles for this fabrication at low temperature which reduces the decomposition temperature of hydrocarbon gases and improves the growth quality of SiC nanowires. The as-synthesized SiC/SiO<sub>2</sub> nanowires consist of single crystal 3C structures as well as 3C structures with defects along [111] direction. In the photoluminescence (PL) spectrum, the SiC/SiO<sub>2</sub> core-shell nanowires revealed an obvious blueshift. The blueshift is due to the formation of nanoscale silicon carbide polytypism caused by the stacking faults in 3C-SiC and the nanoscale polytypism also caused the transition from indirect to direct bandgap which explains why the stacking faults percentage in SiC confirmed from X-ray diffraction (XRD) is 19%, but ultimately makes the strongest emission intensity. Finally, the PL characteristics are further improved by changing the diameter of the SiC nanowire and etching and an approximate model followed by the vapor-liquid-solid (VLS) mechanism was proposed to explain the possible growth mechanism of the SiC/SiO<sub>2</sub> nanowires.
BibTeX
@inproceedings{chen2021synthesis,
  author = {Bo‐Yu Chen and Chong‐Chi Chi and Wen‐Kuang Hsu and Hao Ouyang},
  title = {{Synthesis of SiC/SiO2 core–shell nanowires with good optical properties on Ni/SiO2/Si substrate via ferrocene pyrolysis at low temperature}},
  booktitle = {Scientific},
  year = {2021},
  doi = {10.1038/s41598-020-80580-y},
}
Figure