Abstract: Silicon carbide is a promising material platform for hosting various color centers suitable for quantum information processing. Here, we report the design and demonstration of an integrated electro-optic modulator that can directly interface the silicon vacancy centers in the 4H-silicon-carbide-on-insulator platform. Despite a relatively low electro-optic coefficient (0.22 pm/V), the optimized silicon carbide modulator is able to work in the 920 nm range with a propagation loss of less than 0.5 dB/cm, featuring a 3-dB bandwidth around 500 MHz, an extinction ratio of 8-12 dB for an operating peak-to-peak voltage of 10 V, and a footprint of less than 0.1 mm². With such modulation performance, our work provides a cost-effective solution for the chip-scale implementation of the electro-optic modulation technology for interfacing color centers in the silicon carbide platform.
1. Introduction
Silicon carbide (SiC) is rapidly emerging as a premier host material for quantum color centers, such as the silicon vacancy ($V_{Si}$), rivaling diamond due to its lower cost and compatibility with standard CMOS semiconductor manufacturing. To build scalable quantum networks or sensors, engineers require on-chip electro-optic modulators (EOMs) to control and shape the light interacting with these color centers.
However, existing SiC EOMs are primarily designed for classical telecommunications (operating at 1550 nm) and prioritize ultra-high bandwidths (tens of GHz). This creates a mismatch for quantum applications: $V_{Si}$ color centers emit light around 920 nm, and because they have long quantum coherence times, they do not strictly require GHz-level modulation. Instead, quantum applications require a high extinction ratio (ER)—a strong contrast between the "on" and "off" optical states. Given that 4H-SiC has a relatively weak electro-optic coefficient, achieving this high contrast requires specialized device optimization.
2. Design and Optimization Strategy
The researchers developed a microring resonator-based EOM on a 4H-silicon-carbide-on-insulator (4H-SiCOI) platform. Instead of chasing maximum speed, they optimized the bandwidth-extinction ratio product (BEP). The core strategy involved precise geometric tuning of the waveguide and its surrounding materials to maximize the electric field's overlap with the optical mode without introducing excessive loss.
A critical design choice was the optimization of the top silicon dioxide cladding layer. By thinning this layer to a "sweet spot" of 400-450 nm, the team minimized the distance between the Ti/Au electrodes and the SiC waveguide. This maximized the modulation efficiency while keeping the metal electrodes far enough away to avoid absorbing the light. Additionally, the microring was engineered to operate near "critical coupling," where the coupling rate matches the intrinsic loss rate, theoretically allowing for maximum contrast between on- and off-resonance transmission.
3. Experimental Results
The fabricated devices demonstrated record-breaking performance for the 920 nm wavelength range. The microring achieved an intrinsic quality ($Q$) factor of 1.8 million, which corresponds to a propagation loss of just 0.44 dB/cm. This high $Q$ factor is the key enabler for the device's performance; a sharp resonance peak ensures that even a tiny voltage-induced shift in wavelength results in a massive change in transmitted light intensity.
Under dynamic testing, the EOM demonstrated an extinction ratio of 8-12 dB using a 10 V peak-to-peak voltage. The device maintained a 3-dB bandwidth of approximately 500 MHz, which is more than sufficient for pulsed shaping of optical pumps or emitted single photons in quantum experiments. The entire device is remarkably compact, occupying a footprint of less than 0.1 mm².
4. Discussion and Outlook
This work proves that careful geometric design can successfully compensate for inherent material weaknesses, such as the low Pockels coefficient of 4H-SiC ($r_{13} \approx 0.22$ pm/V). By trading telecom-level bandwidth for high extinction ratios, the researchers created a device perfectly suited for the quantum regime.
Future improvements could involve using SiC wafers from different manufacturers that possess higher electro-optic coefficients, which could potentially cut the required drive voltage in half. Furthermore, this design framework is adaptable to other wavelengths, allowing for interfaces with various other color centers discovered in the SiC platform. This study paves the way for scalable, chip-integrated quantum technologies using standard semiconductor materials.
Summary updated