Synthesis and NMR characterization of a spirosilole tetra-anion: a homogeneous four-electron reductant

Zhengang Han, Lei Bai, Shuhui Huo, Jing Chen, Xiaoquan LuMain 2018 · DOI

Abstract

The development of highly selective homogeneous electron transfer reagents is highly desirable for synthetic chemistry. An isolable spirosilole tetra-anion described in this paper has been proved to be a promising soluble electron transfer reagent. The reduction of octaphenyl-1,1′-spirobisilole (1) with lithium resulted in the formation of the isolable spirosilole tetra-anion in good yield. The tetra-anion (2) has been characterized by nuclear magnetic resonance (NMR) and cleanly underwent electron transfer reactions with dioxygen, carbonyl groups, and transition metal halides to yield reduction products with the regeneration of 1.

Introduction

Homogeneous reductants, such as the Birch reduction or naphthalene radical anions, are valued in synthetic chemistry for their high selectivity compared to heterogeneous metal surfaces. However, many existing reagents are either excessively harsh, leading to over-reduction, or are limited to transferring only one or two electrons at a time. Siloles—five-membered rings containing silicon—possess unique electronic properties, notably low-lying LUMO levels. While silole dianions have been previously studied, the isolation of a spirosilole tetra-anion—a double-ring system carrying four extra electrons—remained a significant challenge. This study addresses this gap by synthesizing a stable, soluble, and well-characterized multi-electron reductant capable of simplifying complex multi-electron transfer reactions.

Methods and Materials

The synthesis began with the optimization of the neutral precursor, octaphenyl-1,1′-spirobisilole (1). By utilizing dimethoxyethane (DME) as a solvent and maintaining precise stoichiometric ratios between lithium and diphenylacetylene, a 60% yield of 1 was achieved. Subsequent reduction of compound 1 with four equivalents of lithium shavings in DME produced the tetra-anion 2, $[Li^+(DME)]_4[1^{4-}]$, as an air-sensitive orange powder in a 95% yield. The choice of DME was critical for stabilizing the highly reactive tetra-anion through strong coordination with lithium ions, preventing the formation of unpurifiable mixtures observed with other solvents. Characterization was performed using multi-nuclear NMR ($^1$H, $^{13}$C, $^{29}$Si, $^7$Li), cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), and DFT calculations using the B3LYP/6-31G(d) basis set.

Results and Discussion

The spirosilole system functions effectively as an "electron reservoir," capable of being "charged" with four electrons to form tetra-anion 2 and "discharged" back to neutral state 1 upon reaction with various oxidants.

Synthesis of the spirosilole tetra-anion 2 from precursor 1 via reduction with lithium in DME.

Cyclic voltammetry of precursor 1 revealed four distinct reduction peaks, confirming its capacity for sequential four-electron acceptance. This electrochemical profile supports the molecule's role as a multi-electron donor.

Cyclic voltammogram of spirosilole 1 in DME, showing four distinct sequential reduction peaks.

NMR analysis provided deep insights into the electronic structure of the tetra-anion. While $^7$Li NMR suggested potential aromaticity, $^{13}$C NMR shifts (specifically at 78.6 ppm for $\alpha$-C atoms) indicated significant carbanion character, with negative charge largely localized on the carbon atoms. DFT calculations further confirmed that the Highest Occupied Molecular Orbital (HOMO) of tetra-anion 2 resembles the Lowest Unoccupied Molecular Orbital (LUMO) of precursor 1, validating the population of predicted orbitals.

The chemical reactivity of 2 was demonstrated through clean electron transfer reactions. It reduced dioxygen ($O_2$) to $Li_2O$ and 1,4-benzoquinone to its dilithium salt, in both cases quantitatively regenerating 1. Furthermore, reaction with transition metal halides like $PdCl_2$ yielded metallic $Pd^0$ powder. XPS analysis of the resulting powder showed characteristic peaks at 335.1 and 340.9 eV, confirming the reduction of $Pd^{II}$ to $Pd^0$.

Conclusion

The successfully isolated spirosilole tetra-anion 2 represents a novel class of homogeneous four-electron reductants. Despite its extreme sensitivity to air and moisture, its high-yield synthesis and clean regeneration make it a promising tool for controlled multi-electron transfer in synthetic chemistry. Future work will focus on applying this reagent to the reduction of main group compounds and the synthesis of low-valent metal complexes.

Summary updated

Abstract

Abstract The development of highly selective homogeneous electron transfer reagents is highly desirable for synthetic chemistry. An isolable spirosilole tetra-anion described in this paper has been proved to be a promising soluble electron transfer reagent. The reduction of octaphenyl-1,1′-spirobisilole ( 1 ) with lithium resulted in the formation of the isolable spirosilole tetra-anion in good yield. The tetra-anion ( 2 ) has been characterized by nuclear magnetic resonance (NMR) and cleanly underwent electron transfer reactions with dioxygen, carbonyl groups, and transition metal halides to yield reduction products with the regeneration of 1 .
BibTeX
@inproceedings{han2018synthesis,
  author = {Zhengang Han and Lei Bai and Shuhui Huo and Jing Chen and Xiaoquan Lu},
  title = {{Synthesis and NMR characterization of a spirosilole tetra-anion: a homogeneous four-electron reductant}},
  booktitle = {Main},
  year = {2018},
  doi = {10.1515/mgmc-2018-0008},
}
Figure