TL;DR
Symbolic State Space Optimization (S3O) automates the creation of high-level "locations" for robots, allowing them to group nearby objects into single symbolic regions. This approach significantly reduces redundant navigation and improves task success rates in long-horizon mobile manipulation, such as clearing a crowded dining table.
What Problem Does This Paper Address?
In Task and Motion Planning (TAMP), robots must bridge the gap between high-level logic (e.g., "pick up the apple") and low-level physics (e.g., "move joint 1 by 15 degrees"). Traditionally, human experts manually define the "symbolic state space"—the set of locations and labels the robot uses to reason.
However, manual definitions are often suboptimal. If an expert defines a unique location for every single object, the robot’s high-level planner will assume it must navigate to a new spot for every item it picks up. This leads to "robotic" inefficiency: a robot might move six inches to pick up a second soda can that was already within reach. Conversely, if locations are too broad, the robot might try to pick up an object from a spot where its arm can't actually reach it. S3O aims to find the "Goldilocks" zone of symbolic locations that are both efficient and physically feasible.
Methods
The authors propose a framework that optimizes the symbolic state space through three main steps:
- Candidate Generation via Voronoi Partitioning: The system uses the 2D positions of objects to create a Voronoi diagram, partitioning the space into regions. It then generates various candidate state spaces by merging adjacent regions (e.g., treating "Can A" and "Can B" as being in the same symbolic location).
- Feasibility-Based Ranking: Not all candidate spaces are good. S3O ranks them using a scoring function based on Action Feasibility. They use a learned Fully Convolutional Network (FCN-VGG16) to generate "feasibility heatmaps" that predict the probability of a successful pick-up from any given 2D coordinate, accounting for obstacles like unmapped chairs.
- Motion-Level Optimization (CMA-ES): Once a symbolic plan is chosen (e.g., "Go to Location 1, pick A, pick B"), the system uses Covariance Matrix Adaptation Evolution Strategy (CMA-ES) to find the optimal 2D coordinates within those regions. This ensures the robot stands in a spot that minimizes travel time while maximizing the chance of reaching all targets in that group.
Datasets
- Training Data: The feasibility model (FCN) was trained on a dataset of past robot experiences, consisting of grayscale heatmap images representing successful and failed navigation/manipulation attempts in environments with randomized obstacles.
- Evaluation Environment: Testing was conducted in a simulated "restaurant" environment using the Gazebo physics engine, featuring seven tables of various sizes and randomly placed "dishes" and chairs.
- Real-World Demo: The system was validated on a Toyota Human Support Robot (HSR) performing a "tidy home" task.
Key Insights and Ideas
- The "Aha!" Moment on Merging: The core insight is that symbolic locations shouldn't just be fixed points; they should be flexible abstractions. By merging Voronoi cells, the robot "discovers" that it can treat a cluster of objects as a single task-level stop, which is much closer to how a human waiter would clear a table.
- Balancing Efficiency and Success: The paper highlights a crucial trade-off. An "efficient" plan that merges too many objects might be impossible to execute (low feasibility). A "safe" plan that treats every object separately is slow (low efficiency). S3O uses probabilistic scoring to find the mathematical balance between these two.
- Handling Unmapped Obstacles: By using a perception-based feasibility model rather than just geometric reachability, the robot can avoid standing in spots that are technically close to an object but blocked by a chair or table leg.
Key Results
- Higher Completion Rates: In "Difficult" scenarios (where objects are surrounded by obstacles), S3O-GROP achieved a task completion rate of ~0.29, significantly outperforming the standard V-GROP baseline (~0.21*).
- Reduced Execution Time: Across all difficulty levels, the optimized state space led to lower execution times. For "Easy" tasks, S3O reduced execution time to ~108 seconds, compared to ~138 seconds for non-optimized TAMP baselines.
- Ablation Success: The authors showed that simply picking a random state space (S3O-Random) resulted in very fast but highly unsuccessful plans, proving that the ranking mechanism is vital for choosing feasible locations.
Limitations and Future Work
- Perception Constraints: The current system relies heavily on top-down views for feasibility mapping. In more complex 3D environments (like shelves), this would need to transition to first-person or 3D voxel-based perception.
- Static vs. Dynamic: While the system handles unmapped static obstacles (chairs), it does not explicitly account for moving obstacles (people) during the state space optimization phase.
- Computational Overhead: Ranking a large number of candidate state spaces can be computationally expensive; future work could involve more efficient ways to prune the candidate set before scoring.
Summary updated