Surface microlenses for much more efficient photodegradation in water treatment

Qiuyun Lu, Qiwei Xu, Jia Meng, Zuo Tong How, Pamela Chelme‐Ayala, Xihua Wang, Mohamed Gamal El‐Din, Xuehua Zhang

Abstract

The global challenge of water scarcity necessitates sustainable and efficient purification technologies. Solar-driven photodegradation offers a promising route for removing organic contaminants, yet its practical application is often limited by slow reaction rates. In this study, we demonstrate that polymeric surface microlenses (MLs) can enhance the photodegradation efficiency of micropollutants by 2 to 24 times. These MLs, fabricated via in-situ polymerization of surface nanodroplets, act as microscale concentrators that create high-intensity "hotspots" of light. We found that efficiency correlates linearly with the cumulative intensity at the focal points. Furthermore, ordered ML arrays outperform random distributions by creating coupled regional effects. Proof-of-concept tests using functionalized glass bottles showed significant acceleration in the degradation of norfloxacin, sulfadiazine, and sulfamethoxazole, suggesting a scalable path for portable, high-efficiency water treatment.

Introduction

Access to clean water is a fundamental human need. While solar-driven photodegradation is a sustainable strategy for wastewater treatment, it typically requires large solar collectors to achieve acceptable throughput due to inherently slow kinetics. Improving the "decontamination efficiency per unit area" is critical for making this technology viable, especially for portable or decentralized systems. This research explores the use of surface-bound microlenses to manipulate light at the microscale, concentrating incident solar energy into localized reaction zones to accelerate the breakdown of organic pollutants.

Experimental Methods

The researchers developed a "solvent exchange" method to fabricate poly(methyl methacrylate) (PMMA) microlenses directly onto hydrophobic substrates.

Experimental setup and fabrication process: (a) Cross-section of the flow reactor; (b) Schematic of ML fabrication on OTS-coated glass; (c) Chemical structures of the pollutants tested.

As shown in the figure above, the process involves introducing a monomer solution into a narrow channel, where water displacement causes the nucleation of tiny nanodroplets. These droplets are then UV-cured to form solid hemispherical lenses. The study compared random ML distributions with ordered arrays (approx. 9 µm diameter) to evaluate the impact of spatial arrangement on efficiency. Testing was conducted using a model dye, Methyl Orange (MO), and several common micropollutants in both flat-plate reactors and functionalized glass bottles.

Results and Discussion

The implementation of surface microlenses resulted in a dramatic increase in photodegradation rates. For the model dye MO, efficiency improved by up to 24 times compared to a bare surface. Notably, the use of an ordered ML array allowed for a 47% reduction in the light energy required to achieve the same level of degradation as a system without lenses.

Chemical structures of the model dye Methyl Orange (MO) and micropollutants Norfloxacin (NFX), Sulfadiazine (SFD), and Sulfamethoxazole (SMZ).

The Focus Effect and Spatial Arrangement

The enhancement is primarily attributed to the "focus effect." The lenses concentrate light at specific focal points, creating high-intensity zones that generate a greater density of active species (radicals) responsible for degradation. Interestingly, ordered arrays were found to be twice as efficient as random MLs for the same total light power. This is likely due to a "coupled effect" where focal points on the same plane create overlapping high-intensity regions, further accelerating the reaction.

Real-World Application: Functionalized Bottles

To demonstrate practical utility, the researchers coated the inner walls of standard glass bottles with MLs. When used to treat water contaminated with norfloxacin (NFX), sulfadiazine (SFD), and sulfamethoxazole (SMZ) (see the chemical structures above), these functionalized bottles achieved degradation rates 30% to 170% faster than untreated bottles. Chemical analysis confirmed that the degradation pathways remained unchanged; the lenses simply accelerated the existing kinetics.

Conclusion

Surface microlenses represent a simple yet powerful tool for enhancing solar water purification. By concentrating light into microscale hotspots, these lenses significantly boost reaction rates without increasing the system's physical footprint. This approach is particularly promising for portable water treatment solutions in remote or resource-limited areas, where maximizing the efficiency of available sunlight is paramount. Future work will focus on optimizing lens packing density and ensuring the long-term durability of these micro-coatings in diverse environmental conditions.

Summary updated

Abstract

The global need for clean water requires sustainable technology for purifying contaminated water. Highly efficient solar-driven photodegradation is a sustainable strategy for wastewater treatment. In this work, we demonstrate that the photodegradation efficiency of micropollutants in water can be improved by ~2-24 times by leveraging polymeric microlenses (MLs). These microlenses (MLs) are fabricated from the in-situ polymerization of surface nanodroplets. We found that photodegradation efficiency (η) in water correlates approximately linearly with the sum of the intensity from all focal points of MLs, although no difference in the photodegradation pathway is detected from the chemical analysis of the byproducts. With the same overall power over a given surface area, η is doubled by using ordered arrays, compared to heterogeneous MLs on an unpatterned substrate. Higher η from ML arrays may be attributed to a coupled effect from the focal points on the same plane that creates high local concentrations of active species to further speed up the rate of photodegradation. As a proof-of-concept for ML-enhanced water treatment, MLs were formed on the inner wall of glass bottles that were used as containers for water to be treated. Three representative micropollutants (norfloxacin, sulfadiazine, and sulfamethoxazole) in the bottles functionalized by MLs were photodegraded by 30% to 170% faster than in normal bottles. Our findings suggest that the ML-enhanced photodegradation may lead to a highly efficient solar water purification approach without a large solar collector size. Such an approach may be particularly suitable for portable transparent bottles in remote regions.
BibTeX
@inproceedings{lu2022surface,
  author = {Qiuyun Lu and Qiwei Xu and Jia Meng and Zuo Tong How and Pamela Chelme‐Ayala and Xihua Wang and Mohamed Gamal El‐Din and Xuehua Zhang},
  title = {{Surface microlenses for much more efficient photodegradation in water treatment}},
  booktitle = {ACS},
  year = {2022},
  doi = {10.1021/acsestwater.2c00008},
}
Figure