Study on Carbon Emission Characteristics and Emission Reduction Measures of Lime Production—A Case of Enterprise in the Yangtze River Basin

Erxi Wu, Qiaozhi Wang, Lihua Ke, Guangquan Zhang

TL;DR

This study quantifies the carbon emissions from quicklime production in a Yangtze River basin enterprise, identifying high-temperature limestone decomposition (64%) and coal combustion (31%) as the primary sources. It proposes targeted emission reduction strategies, including CO2 capture and fuel optimization, offering a crucial reference for the industry's pursuit of carbon neutrality.

What Problem Does This Paper Address?

The global push towards net-zero emissions, exemplified by the Paris Agreement and national commitments like China's, necessitates a deep understanding of carbon footprints across all industrial sectors. The lime industry, a fundamental component of construction, metallurgy, and other key industries, is a significant contributor to carbon emissions. However, detailed, life-cycle-based carbon accounting for specific lime production facilities, especially within rapidly industrializing regions like China's Yangtze River basin, has been limited. This paper aims to fill this gap by providing a granular analysis of carbon emissions from a representative lime production enterprise, identifying the most impactful emission sources, and suggesting practical reduction measures to support the industry's decarbonization efforts.

Methods

The researchers employed the IPCC emission factor method to construct a carbon emission life cycle accounting model for quicklime production. This method is a globally recognized standard for estimating emissions across various sectors. The study defined the system boundaries to encompass three key stages: open-pit mining, crushing, and calcination, including direct and indirect emissions.

For each stage, specific emission sources were identified:

  • Mining: Explosives and diesel combustion for equipment.
  • Crushing: Electricity consumption.
  • Calcination: Electricity consumption, coal combustion for heating, and the crucial high-temperature decomposition of limestone itself.

The study also incorporated an error transfer method to quantify the uncertainty associated with the carbon emission calculations, providing a measure of confidence in the results.

Datasets

The study utilized data collected from a specific limestone mining enterprise ("Mine A") located in the Yangtze River basin. This data, obtained from the production technology department of the enterprise, covered material and energy flows for quicklime production from 2019 to 2021. This included:

  • Explosives consumption
  • Diesel consumption
  • Electricity consumption (for crushing and calcination)
  • Coal consumption (for calcination)
  • Quicklime output

The paper also references general carbon emission factors provided by the IPCC and other relevant guidelines for calculations.

Key Insights and Ideas

  • Limestone Decomposition is the Elephant in the Kiln: The most striking insight is that the chemical process of limestone decomposing into lime at high temperatures is the single largest source of CO2 emissions, accounting for a substantial 64% of the total. This highlights that simply improving fuel efficiency or reducing energy consumption won't be enough; addressing the inherent chemical reaction is paramount.
  • Coal is Still a Major Player: While limestone decomposition dominates, coal combustion remains a significant contributor (31%), underscoring the continued reliance on fossil fuels in the calcination process.
  • Life Cycle Matters: The study emphasizes that emissions occur across the entire production chain, from mining to final calcination, not just at the point of combustion. This holistic view is essential for effective emission reduction planning.
  • Uncertainty is Quantifiable and Manageable: The application of the error transfer method provides a realistic assessment of the uncertainty in the carbon accounting (around 2-2.13%). This is crucial for building trust in the findings and for guiding future data collection efforts.

Key Results

  • Carbon Footprint: The carbon dioxide equivalent (CO2e) emissions per ton of quicklime produced ranged from 1096.68 kg CO2e to 1176.96 kg CO2e between 2019 and 2021.
  • Emission Source Breakdown (Average):
    • High-temperature decomposition of limestone: 64%
    • Coal combustion: 31%
    • Purchased electricity: 4.71%
    • Diesel combustion: 0.28%
    • Explosives: 0.01%
  • Uncertainty: The overall uncertainty in the life cycle carbon emissions for quicklime production was found to be approximately 2.13% (2019), 2.07% (2020), and 2.09% (2021).

Limitations and Future Work

The authors acknowledge several limitations:

  • Geographical Variance of Emission Factors: The carbon emission factors for lime production can vary significantly due to differences in the chemical composition of limestone (calcium oxide and magnesium oxide content) and the quality of lime produced. This means the IPCC model, while useful, has geographical limitations.
  • Data Availability: The study faced challenges due to the limited disclosure of production data from small lime enterprises in China. This scarcity of data restricts the scope of analysis and makes it difficult to compare the IPCC model with other models for further validation.

Future work could focus on:

  • Expanding Data Collection: Encouraging more enterprises, especially smaller ones, to disclose their production data would improve the robustness of future studies.
  • Developing Region-Specific Emission Factors: Creating more localized emission factors for limestone and coal could enhance the accuracy of carbon accounting in specific regions.
  • Broader Emission Reduction Strategies: While the paper suggests CO2 capture and fuel optimization, future research could explore energy conservation measures across the entire mining area, including the adoption of new energy equipment for mining operations.

Summary updated

Abstract

A scientific carbon accounting system can help enterprises reduce carbon emissions. This study took an enterprise in the Yangtze River basin as a case study. The accounting classification of carbon emissions in the life cycle of lime production was assessed, and the composition of the sources of carbon emission was analyzed, covering mining explosives, fuel (diesel, coal), electricity and high-temperature limestone decomposition. Using the IPCC emission factor method, a carbon life cycle emission accounting model for lime production was established. We determined that the carbon dioxide equivalent from producing one ton of quicklime ranged from 1096.68 kg CO2 equiv. to 1176.96 kg CO2 equiv. from 2019 to 2021 in the studied case. The decomposition of limestone at a high temperature was the largest carbon emission source, accounting for 64% of the total carbon emission. Coal combustion was the second major source of carbon emissions, accounting for 31% of total carbon emissions. Based upon the main sources of carbon emission for lime production, carbon emission reduction should focus on CO2 capture technology and fuel optimization. Based on the error transfer method, we calculated that the overall uncertainty of the life cycle carbon emissions of quicklime from 2019 to 2021 are 2.13%, 2.07% and 2.09%, respectively. Using our analysis of carbon emissions, the carbon emission factor of producing one unit of quicklime in the lime enterprise in the Yangtze River basin was determined. Furthermore, this research into carbon emission reduction for lime production can provide a point of reference for the promotion of carbon neutrality in the same industry.
BibTeX
@inproceedings{wu2023study,
  author = {Erxi Wu and Qiaozhi Wang and Lihua Ke and Guangquan Zhang},
  title = {{Study on Carbon Emission Characteristics and Emission Reduction Measures of Lime Production—A Case of Enterprise in the Yangtze River Basin}},
  booktitle = {Sustainability},
  year = {2023},
  doi = {10.3390/su151310185},
}
Figure