Stiffness Modeling and Performance Evaluation of a (R(RPS&RP))&2-UPS Parallel Mechanism

Minghao Wang, Manxin Wang, Hutian Feng, Chuhan WuChinese 2025 · DOI

Abstract

The average stiffness performance indices throughout the workspace are commonly used as global stiffness performance indices to evaluate the overall stiffness performance of parallel mechanisms. However, this involves time-consuming calculations across numerous discrete points. This paper presents a semi-analytical approach for stiffness modeling of the novel (R(RPS&RP))&2-UPS parallel mechanism (the "Trifree" mechanism) and proposes "local" stiffness performance indices as efficient alternatives to global indices. By extracting four special reference configurations based on the mechanism's spherical motion pattern, the authors achieve high computational efficiency without sacrificing accuracy. The proposed indices are also validated on Tricept and Trimule mechanisms, demonstrating broad applicability.

Introduction

In high-precision manufacturing sectors like aerospace and rail, hybrid robots—combining the rigidity of parallel mechanisms with the flexibility of serial arms—are essential for high-speed machining. A critical performance metric for these robots is stiffness. Traditionally, evaluating a robot's global stiffness requires calculating the average stiffness across thousands of points in its workspace. During the iterative design phase, this process becomes a significant bottleneck. This paper addresses this challenge by introducing a "local" stiffness evaluation method for the Trifree mechanism that uses just four specific reference points to estimate global performance with over 98% accuracy.

The Trifree mechanism, a 5-DOF hybrid robot featuring RPS, RP, and UPS limbs.

Methods

The researchers focused on the Trifree mechanism, a novel 5-DOF hybrid robot. Their methodology consists of two primary innovations:

Semi-Analytical Stiffness Modeling

Using screw theory and the principle of virtual work, the authors developed a mathematical model of the robot's stiffness. A significant challenge was the overconstrained planar linkage (the RPS&RP chain). The authors simplified this by treating the complex linkage as a 2-DOF compound joint, effectively converting the system into a more manageable 3-DOF parallel mechanism. This simplification allowed for an elegant and solvable mathematical representation of the system's elastic elements.

Kinematic diagram of the Trifree mechanism used for semi-analytical stiffness modeling.

"Local" Performance Indices

Rather than integrating stiffness over the entire 3D workspace, the authors leveraged the robot's spherical motion pattern. They identified a "middle layer" within the workspace—a spherical crown representing the half-stroke of the robot's limbs. By extracting exactly four reference configurations from this layer, they proposed that the average stiffness at these points could serve as a "local" index, replacing the computationally intensive global index.

Key Results and Insights

The study yielded several significant findings:

  • Model Accuracy: The semi-analytical stiffness model matched heavy-duty Finite Element Analysis (FEA) simulations with a maximum error of only 5.92%.
  • Efficiency Gains: The "local" 4-point stiffness indices predicted the global indices with a maximum error of just 1.01% for the Trifree robot, drastically reducing computation time.
  • Component Contributions: The model identified that actuated limb-body assemblies dominate linear stiffness, while passive limbs dictate angular stiffness. This provides clear guidance for structural optimization (e.g., where to add material vs. save weight).
  • Generalization: The 4-point method was successfully applied to the Tricept and Trimule industrial robots, with maximum errors of 3.73% and 4.61% respectively, proving the method's broad applicability to spherical parallel mechanisms.

Conclusion

This research demonstrates that global stiffness performance can be accurately estimated using a small set of strategic "local" points. While the current model assumes linear elasticity and ignores factors like joint clearance and friction, it provides a powerful tool for rapid design optimization. Future work will focus on integrating these local indices directly into automated optimization algorithms to further streamline the development of high-performance hybrid robots.

Summary updated

Abstract

Abstract The average stiffness performance indices throughout the workspace are commonly used as global stiffness performance indices to evaluate the overall stiffness performance of parallel mechanisms, which involves an analysis of the stiffness performance of numerous discrete points in the workspace. This necessitates time-consuming and inefficient calculation, which is particularly pronounced in the optimization design stage of the mechanism, where the variations in the global stiffness performance indices versus various dimensional and structural parameters need to be analyzed. This paper presents a semi-analytical approach for stiffness modeling of the novel (R(R P S&RP))&2-U P S parallel mechanism (referred to as the Trifree mechanism) and proposes “local” stiffness performance indices as alternatives to global indices. Drawing on the screw theory, the Cartesian stiffness matrix of the Trifree mechanism is formulated explicitly by considering the compliances of all elastic elements and the over-constraint characteristics inherent in the mechanism. Based on the spherical motion pattern of the Trifree mechanism, four special reference configurations are extracted within the workspace. This yields “local” stiffness performance indices capable of accurately evaluating the overall stiffness performance of the mechanism and effectively improving the computational efficiency. The variations in global and “local” stiffness performance indices versus key design parameters are investigated. Furthermore, the proposed indices are applied to the Tricept and Trimule mechanisms. The results demonstrate that the proposed indices exhibit excellent computational accuracy and efficiency in evaluating the overall stiffness performance of these spherical parallel mechanisms. Moreover, the stiffness performance of the novel parallel mechanism investigated in this study closely resembles that of the well-known Tricept and Trimule mechanisms. This research proposes a semi-analytic stiffness model of the Trifree mechanism and “local” stiffness performance indices to evaluate the overall stiffness performance, thereby substantially improving the computational efficiency without sacrificing accuracy.
BibTeX
@inproceedings{wang2025stiffness,
  author = {Minghao Wang and Manxin Wang and Hutian Feng and Chuhan Wu},
  title = {{Stiffness Modeling and Performance Evaluation of a (R(RPS\&RP))\&2-UPS Parallel Mechanism}},
  booktitle = {Chinese},
  year = {2025},
  doi = {10.1186/s10033-025-01347-y},
}
Figure