Abstract
Industrial robots with "hybrid hinge" or closed-loop structures offer high-payload capabilities but present significant challenges for traditional kinematic modeling using the Denavit-Hartenberg (D-H) method. This study proposes a simplified kinematic analysis approach that transforms complex closed-chain mechanisms into equivalent logic open-chain systems. By applying homogeneous transformation theory and algebraic elimination for inverse kinematics, the method achieves high computational efficiency and accuracy. Experimental validation using a Kawasaki ZX165U robot shows a mean spatial error of 0.0206 mm and negligible orientation error, confirming the method's effectiveness for industrial simulation and control.
Introduction
In robotics, the Denavit-Hartenberg (D-H) method is the standard for calculating joint movements required to position an end-effector. However, D-H parameters are notoriously difficult to define for robots with "hybrid hinges" or closed-loop chains—structures where links form physical loops, such as parallelograms. These designs are popular in heavy industry because they support high-payload movements with lower energy consumption. The Kawasaki ZX165U (Figure 1) is a prime example of such a "new-type" robot. Its complex geometry makes standard kinematic equations sophisticated and error-prone, necessitating a more intuitive modeling approach.
Methodology
The researchers employed a multi-step approach to simplify the kinematic calculations:
- Closed-to-Open Chain Transformation: Instead of analyzing every link in a closed loop, the system identifies active and passive joints. The closed loops are mathematically "broken" into logic open-chain systems, as shown in the transformation diagrams. This avoids the tedious process of judging the motion of every individual kinematic pair in the complex hinge.
- Homogeneous Transformation Theory: Once simplified into an open chain, homogeneous transformation matrices describe the relationship between coordinate systems at each active joint.
- Inverse Kinematics via Elimination: To solve for joint angles given a target position, an algebraic elimination method isolates variables, making the equations solvable.
- Geometric Insights: A crucial observation is that the robot's parallelogram structure leads to dependent joint angles ($q_4 = -q_5 = q_3 = q_2$). Additionally, the design ensures "translation consistency," where the end-effector maintains a level orientation even as the main arm rotates.
Results and Validation
The proposed method was implemented in MATLAB’s Simmechanics toolbox and validated against a physical Kawasaki ZX165U robot. Trajectory data from five arbitrary spatial paths (including "W" and "S" shapes) were used for comparison.
The simulation proved highly accurate:
- Spatial Precision: The mean error between the simulation and the real robot was only 0.0206 mm, with a maximum error of 0.037 mm.
- Orientation Accuracy: The error in Euler angles was approximately 0.0011°, which is considered negligible for industrial applications.
- Path Consistency: The virtual model's paths matched the actual robot's movements almost perfectly, validating the closed-to-open chain theory as a viable alternative to traditional D-H modeling.
Conclusion
This paper demonstrates that transforming complex closed-chain mechanisms into logic open-chain systems significantly simplifies the kinematic analysis of hybrid-hinge robots without sacrificing accuracy. While this study focuses on kinematics, it provides a foundational model for future work in dynamics, real-time collision avoidance, and advanced path-planning algorithms for high-payload industrial robots.
Summary updated