Statistical theory of superlattices

H. A. BetheProceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences 1935 · DOI

This 1935 classic by Hans Bethe is a cornerstone of statistical mechanics, providing a more sophisticated look at how materials transition from disorder to order. While it focuses on metal alloys, the "Bethe approximation" introduced here has influenced fields ranging from magnetism to modern neural networks.

TL;DR

Hans Bethe refines the theory of order-disorder transitions in alloys by moving beyond "mean-field" assumptions to account for local atomic fluctuations. By distinguishing between short-range and long-range order, he explains why local patterns persist even above the critical temperature, providing a much more accurate prediction of a material's specific heat during phase transitions.

What Problem Does This Paper Address?

In the 1930s, physicists were trying to understand superlattices—ordered arrangements that form in alloys (like CuZn) at low temperatures. At high temperatures, atoms are distributed randomly. As the temperature drops, they suddenly snap into a regular, alternating pattern.

The prevailing theory at the time, proposed by Bragg and Williams, used a "mean-field" approach. It assumed that the force driving an atom to sit in a "right" spot depended only on the average order of the entire crystal. Bethe argued this was physically unrealistic: an atom is primarily influenced by its immediate neighbors, not the global average. The Bragg-Williams model failed to explain why materials still show "extra" specific heat even after the global order has vanished—a phenomenon Bethe set out to solve.

Methods

Bethe introduced what is now known as a cluster expansion or the Bethe approximation. Instead of looking at the whole crystal at once, he focused on a "central atom" and its successive "shells" of neighbors.

  1. Local Partition Functions: He calculated the probability of different atomic configurations within these local clusters.
  2. The Consistency Parameter ($\epsilon$): To account for the rest of the crystal outside the cluster, he introduced a parameter $\epsilon$. This represents the "ordering force" exerted by the outer shells on the first shell of neighbors.
  3. Self-Consistency: He determined the value of $\epsilon$ by requiring that the probability of the central atom being "wrongly" placed must equal the probability of any atom in the first shell being "wrongly" placed.
  4. Two Degrees of Order: He formally distinguished between long-distance order ($S$), the global pattern, and order of neighbors ($\sigma$), the local tendency for unlike atoms to sit next to each other.

Datasets

As a theoretical physics paper from 1935, there are no digital datasets. Instead, Bethe evaluates his model against different geometric abstractions of crystals:

  • Linear chains (1D)
  • Quadratic lattices (2D)
  • Simple cubic, Body-Centered Cubic (BCC), and Face-Centered Cubic (FCC) lattices (3D)

He compares his results against the earlier Bragg-Williams theory and known experimental qualitative behaviors of alloys.

Key Insights and Ideas

  • Dimensionality is Destiny: Bethe demonstrates that long-range order is impossible in a 1D chain at any finite temperature. As shown in Figure 1, a single "wrong" pair in a 1D chain completely breaks the global order. In 2D or 3D, the system can "heal" around a defect because atoms have multiple neighbors to reinforce the pattern.
Figure 1: Comparison of order breaks in 1D vs 2D/3D lattices.
  • Short-Range Order Persists: The most significant "aha" moment is that local order ($\sigma$) does not vanish at the same time as global order ($S$). Even above the Curie point (the transition temperature), atoms still prefer to be near unlike neighbors. This lingering local correlation is what carries the "extra" energy that mean-field theories missed.
  • The Specific Heat Jump: The theory predicts a sharp jump in specific heat at the transition point. Bethe’s model shows that the specific heat remains non-zero above this point, decreasing gradually as the last remnants of local order dissolve.

Key Results

  • Curie Point Prediction: Bethe derived a formula for the critical temperature based on the number of neighbors ($z$). For a simple cubic lattice, he calculated the transition point $x_0 = 0.6563$, a slight but important refinement over the $0.6667$ predicted by simpler models.
  • Specific Heat Accuracy: The model predicts a specific heat jump that is much closer to experimental observations. For a simple cubic lattice, the specific heat is $1.90k$ just below the transition and drops to $0.119k$ just above it.
  • Order Curves: Figures 4 and 5 illustrate how the "order of neighbors" stays higher for longer compared to the "long-distance order," which drops sharply to zero at the critical temperature.
Figure 6: Specific heat per atom as a function of temperature for various approximations.

Limitations and Future Work

  • Nearest-Neighbor Only: The model assumes atoms only interact with their immediate neighbors. In real metals, longer-range electronic interactions might play a role.
  • Computational Complexity: Bethe noted that moving to a "third approximation" (considering even larger shells of atoms) became "extremely tedious" to calculate by hand.
  • Quantum Effects: While sufficient for alloys, Bethe acknowledged that a truly accurate theory of ferromagnetism (which he used as an analogy) would require full quantum mechanics to handle electron exchange interactions.

Summary updated

Abstract

Abstract In a recent paper, Bragg and Williams have pointed out that the arrangement of the atoms in an alloy depends in a striking way on the temperature. At high temperatures, the atoms are distributed practically at random among the lattice points of the crystal, but at low temperatures a superlattice may be formed such that the atoms of one kind are arranged in a regular lattice of their own and the atoms of the other kind occupy the remaining “sites” in the crystal. The transition from the ordered to the disordered state occurs in a fairly small temperature range, and is accompanied by a large specific heat, an increase in electric resistance, etc. The mathematical method employed by Bragg and Williams is similar to that used in Weiss’s theory of ferromagnetism. Both involve the assumption that the “force” tending to produce order at a given point is uniquely determined by the average state of order throughout the crystal. Actually it will depend on the configuration of the atoms in the immediate neighbourhood of the point under consideration. The order of the crystal as a whole determines this configuration only on the average. In the present paper, the effect of fluctuations in configuration, which was neglected by Bragg and Williams, will be taken into account.
BibTeX
@inproceedings{bethe1935statistical,
  author = {H. A. Bethe},
  title = {{Statistical theory of superlattices}},
  booktitle = {Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences},
  year = {1935},
  doi = {10.1098/rspa.1935.0122},
}
Theory of spin glassesJournal of Physics F: Metal Physics · 1975
On the Specific Heat of α Phase Alloys of Iron and CobaltJournal of the Japan Institute of Metals and Materials · 1953
On the Anomaly of the Specific Heat at High Temperatures in α Phase Alloys of Copper and ZincJournal of the Japan Institute of Metals and Materials · 1952
On Ising's model of ferromagnetismMathematical Proceedings of the Cambridge Philosophical Society · 1936
On the Anomaly of the Specific Heat at High Temperatures in α Phase Alloys of Iron and ChromiumJournal of the Japan Institute of Metals and Materials · 1952
Quantifying chemical short-range order in metallic alloysarXiv · 2023
Figure