Stability of Phosphors for White LED Excitable by Violet Light

Zesheng Pan, Yi‐Zhuang You, Zheng Ya, H. Y. Chen, Lianjun Wang, Wan JiangJournal of Inorganic Materials 2024 · DOI

TL;DR

This paper investigates the environmental stability of three rare-earth phosphors designed for violet-light-excited white LEDs. By subjecting these phosphors to harsh conditions like high temperature, humidity, water immersion, and prolonged violet light exposure, the researchers identify their failure mechanisms and assess their suitability for commercial applications, ultimately demonstrating improved stability in assembled white LED devices.

What Problem Does This Paper Address?

Violet-light-excited white LEDs (V-LEDs) offer advantages over traditional blue-light-excited LEDs, such as tunable color temperature and reduced blue light emission, making them attractive for various lighting applications. However, the widespread adoption of V-LEDs is hindered by the lack of high-performance phosphors with sufficient environmental stability. While many efficient phosphors have been developed, their long-term performance under real-world operating conditions (heat, humidity, light exposure) remains largely uncharacterized. This paper addresses this critical gap by systematically evaluating the stability of promising red, blue, and green phosphors for V-LEDs, aiming to guide the development of more robust and commercially viable V-LED technologies.

Methods

The researchers synthesized three rare-earth phosphors using a solid-state reaction method:

  • K₂CaPO₄F:Eu²⁺ (red phosphor): Synthesized at 850°C in a nitrogen-hydrogen atmosphere.
  • K₁.₃Al₁₁O₁₇₊δ:Eu²⁺ (blue phosphor): Synthesized at 1300°C in a nitrogen-hydrogen atmosphere, with an excess of K₂CO₃ to compensate for potassium loss.
  • Ca₂YHf₂Al₃O₁₂:Ce³⁺,Tb³⁺ (green phosphor): Synthesized in a two-step process at 1400°C and then 1550°C in a nitrogen-hydrogen atmosphere.

The stability of these phosphors was evaluated under several conditions:

  • High temperature and humidity: Exposure to 85°C and 85% relative humidity (RH) for varying durations.
  • Water immersion: Soaking the phosphors in deionized water.
  • Violet light irradiation: Exposing the phosphors to 200 mW/cm² violet light from LED chips.
  • High temperature: Testing thermal quenching by measuring luminescence at elevated temperatures.

Characterization techniques included:

  • X-ray Diffraction (XRD): To analyze phase composition and identify degradation products.
  • Scanning Electron Microscopy (SEM): To observe surface morphology changes.
  • Photoluminescence (PL) spectroscopy: To measure excitation and emission spectra, and assess luminescence intensity changes.
  • Photoluminescence Quantum Yield (PLQY) measurements: To quantify luminescence efficiency.
  • Thermoluminescence (TL) spectroscopy: To investigate defect levels.

Finally, the three phosphors were mixed in a specific ratio and combined with a 400 nm violet LED chip, encapsulated in silicone, to create white LED devices. The performance and stability of these assembled devices were also evaluated.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of novel phosphors and their performance in fabricated devices.

Key Insights and Ideas

  • Fluoride phosphors are susceptible to hydrolysis: K₂CaPO₄F:Eu²⁺, a fluoride-containing phosphor, showed significant degradation under high humidity and water immersion due to hydrolysis, forming K₃CaH(PO₄)₂ and KCaF₃ phases. This highlights a key limitation for applications in humid environments.
  • Alumina-based phosphors offer better moisture resistance: K₁.₃Al₁₁O₁₇₊δ:Eu²⁺, an alumina-based phosphor, demonstrated excellent stability in high humidity and water immersion, with minimal changes in its crystal structure and luminescence.
  • Defect engineering impacts light stability: While K₁.₃Al₁₁O₁₇₊δ:Eu²⁺ showed good moisture resistance, it exhibited relatively poor stability under prolonged violet light irradiation. This was attributed to the presence of K⁺ vacancies acting as defect sites that trap electrons, increasing non-radiative decay.
  • Garnet phosphors show good overall stability but thermal limitations: Ca₂YHf₂Al₃O₁₂:Ce³⁺,Tb³⁺ exhibited excellent stability under high humidity, water immersion, and violet light irradiation. However, it showed significant thermal quenching at higher temperatures, with a low activation energy for thermal quenching.
  • Assembled devices show improved stability: The white LED devices fabricated using the mixed phosphors demonstrated enhanced environmental stability compared to individual phosphors, suggesting a synergistic effect or protective role of the encapsulation and device structure.

Key Results

  • K₂CaPO₄F:Eu²⁺: Exhibited a high PLQY of 95.33% and good thermal quenching resistance (82.2% at 175°C) and light stability (87.9% after 14 days of irradiation). However, its humidity stability was poor, with luminescence intensity decreasing significantly after 24 hours at 85°C/85% RH.
  • K₁.₃Al₁₁O₁₇₊δ:Eu²⁺: Showed a PLQY of 74.29%, excellent humidity (92.2% after 14 days) and water stability, and good thermal quenching resistance (81.8% at 175°C). Its light stability was moderate (57.6% after 14 days).
  • Ca₂YHf₂Al₃O₁₂:Ce³⁺,Tb³⁺: Possessed a high PLQY of 95.72%, excellent humidity (84.6% after 14 days) and water stability, and remarkable light stability (95.5% after 14 days). Its thermal quenching resistance was limited (59.8% at 175°C).
  • White LED Device: Achieved a high color rendering index (Ra) of 93.6, a correlated color temperature (CCT) of 5151 K, and CIE coordinates of (0.34, 0.36). The assembled device showed improved stability under humidity and light irradiation compared to individual phosphors. For instance, after 24 hours at 85°C/85% RH, the device retained 71.3% of its initial intensity, and after 14 days of violet light irradiation, it maintained 84.6% of its initial intensity and an Ra of 92.6.

Limitations and Future Work

  • K₂CaPO₄F:Eu²⁺ limitations: The significant hydrolysis of this red phosphor limits its application in humid environments. Future work could focus on surface passivation or developing alternative red phosphors with better moisture resistance.
  • K₁.₃Al₁₁O₁₇₊δ:Eu²⁺ light stability: The poor performance under prolonged violet light irradiation needs improvement. Strategies to mitigate defect-induced non-radiative decay, such as defect passivation or structural modifications, could be explored.
  • Ca₂YHf₂Al₃O₁₂:Ce³⁺,Tb³⁺ thermal quenching: The significant thermal quenching of this green phosphor needs to be addressed for high-power LED applications. Further research into strategies to enhance thermal stability, such as doping with other elements or modifying the crystal structure, is suggested.
  • Device-level optimization: While the assembled white LED devices showed improved stability, further optimization of the phosphor mixture ratios and encapsulation materials could lead to even better performance and longevity.
  • Broader environmental testing: While the study covers key environmental factors, exploring other potential degradation pathways or longer-term testing under more varied conditions could provide a more comprehensive understanding of phosphor durability.

Summary updated

BibTeX
@article{pan2024stability,
  author = {Zesheng Pan and Yi‐Zhuang You and Zheng Ya and H. Y. Chen and Lianjun Wang and Wan Jiang},
  title = {{Stability of Phosphors for White LED Excitable by Violet Light}},
  journal = {Journal of Inorganic Materials},
  year = {2024},
  doi = {10.15541/jim20240396},
}
Figure