Stability Analysis of Nonlinear Nuclear Reactor Cores Adopting T-S Fuzzy Modeling and Lyapunov Theory

Gang Li, Bin Liang, Xueqian Wang, Xiu Li, Kang Wang2016 · DOI

Abstract

This research addresses the stability analysis of nonlinear pressurized water reactor (PWR) cores. By modeling a nonlinear PWR core using the lumped parameter method, a linearized model is derived via small perturbation linearization. Local linear models at six power levels are selected to construct a Takagi-Sugeno (T-S) fuzzy model using triangular membership functions, approximating the nonlinear core across its entire operating range. A stability theorem based on Lyapunov theory is deduced to prove that the nonlinear core is globally asymptotically stable. Numerical simulations confirm that the fuzzy model accurately substitutes the nonlinear core model, and stability analyses verify global asymptotic stability from 10% to 100% power.

Introduction

Nuclear reactor cores are inherently nonlinear and time-varying systems. Traditional control system designs often rely on linearized models that are only accurate near specific operating points, such as 100% full power. However, reactors must safely navigate a wide range of power levels during startup, shutdown, and load-following operations. Ensuring the safety and reliability of Nuclear Power Plants (NPPs) requires a rigorous proof that the reactor remains stable across its entire operational spectrum, rather than just at discrete points.

Methodology

The research employs a multi-step modeling and verification pipeline to bridge the gap between local linear stability and global nonlinear stability.

1. Lumped Parameter Modeling and Linearization

The process begins with "point kinetics" equations, simplifying reactor physics into differential equations for neutron density, precursor concentrations, and temperatures. This nonlinear model is then linearized at six specific power levels (10%, 20%, 40%, 60%, 80%, and 100%) using small perturbation methodology.

2. T-S Fuzzy Modeling

The core innovation lies in the application of Takagi-Sugeno (T-S) fuzzy modeling. Triangular membership functions are utilized to "blend" the six local linear models into a single global fuzzy model. This model serves as a mathematical bridge, capturing nonlinearities while remaining structured enough for formal stability proofs.

Triangular membership functions for the T-S fuzzy model across power levels.

3. Lyapunov Stability Analysis

To prove global stability, the authors apply Lyapunov’s direct method. The goal is to identify a common positive definite real symmetric matrix ($N$) that satisfies a set of Linear Matrix Inequalities (LMIs) for all local models simultaneously. The existence of such a matrix guarantees that the entire nonlinear system is globally asymptotically stable.

Results and Discussion

The proposed methodology was validated through numerical simulations using physical parameters from a 2200 MW PWR.

High Fidelity Approximation

Numerical simulations demonstrate that the T-S fuzzy model (FM) provides a high-fidelity approximation of the original nonlinear model (NL). As shown in the comparative responses across various power levels, the outputs of the two models are nearly identical, confirming the fuzzy model's validity as a surrogate for the nonlinear system.

Comparison of the T-S fuzzy model (FM) and nonlinear model (NL) responses across different power levels.

Stability Verification

The stability analysis successfully identified a common Lyapunov matrix $N$. All eigenvalues of $N$ were found to be positive (ranging from approximately $1.25$ to $8.16 \times 10^4$), mathematically confirming that the nonlinear reactor core is globally asymptotically stable across the full range of power levels (10% to 100%).

Conclusion

This study provides a robust framework for analyzing the stability of nonlinear nuclear reactor cores. While the current "point reactor" model simplifies spatial variations and assumes constant coolant inlet temperatures, the T-S fuzzy approach proves highly effective. Future work may extend this method to include spatial oscillations in larger cores and fluctuating inlet temperatures, ultimately supporting the design of advanced load-following controllers for modern power grids.

Summary updated

Abstract

This research is to solve the stability analysis issue of nonlinear pressurized water reactor cores. On the basis of modeling a nonlinear pressurized water reactor core using the lumped parameter method, its linearized model is achieved via the small perturbation linearization way. Linearized models of the nonlinear core at six power levels are selected as local models of this core. The T-S fuzzy idea for the core is exploited to construct the T-S fuzzy model of the nonlinear core based on the local models and the triangle membership function, which approximates the nonlinear core model within the entire range of power level. This fuzzy model as a bridge is to cater to the stability analysis of the nonlinear core after defining its stability. One stability theorem is deduced to define the nonlinear core is globally asymptotically stable in the global range of power level. Finally, the simulation work and stability analyses are separately completed. Numerical simulations show that the fuzzy model can substitute the nonlinear core model; stability analyses verify the nonlinear core is globally asymptotically stable in the global range of power level.
BibTeX
@misc{li2016stability,
  author = {Gang Li and Bin Liang and Xueqian Wang and Xiu Li and Kang Wang},
  title = {{Stability Analysis of Nonlinear Nuclear Reactor Cores Adopting T-S Fuzzy Modeling and Lyapunov Theory}},
  year = {2016},
  doi = {10.2991/amsm-16.2016.57},
}
Figure