Identification of Nonlinear Systems From the Knowledge Around Different Operating Conditions: A Feed-Forward Multi-Layer ANN Based Approach

Sayan Saha, Saptarshi Das, Anish Acharya, Abhishek Kumar, Sumit Mukherjee, Indranil Pan, Amitava GuptaarXiv 2012 · arXiv

Introduction

Modeling complex nonlinear systems is a fundamental challenge in control engineering. Most physical systems are inherently nonlinear, and traditional approaches often rely on linearizing governing equations around a specific operating point using techniques like Taylor series expansion. While useful, these linearized models are inherently local and fail when the system shifts to a different operating condition. This paper explores a robust alternative: using a feed-forward Artificial Neural Network (ANN) to synthesize a global dynamic model from data gathered at multiple local, linearized operating points.

Methodology: ANN-Based System Identification

The authors frame system identification as a Multiple-Input-Single-Output (MISO) regression problem. The core of the approach is a multi-layer feed-forward ANN trained with the Levenberg-Marquardt back-propagation algorithm.

Architecture of the multi-layer feed-forward ANN used for system identification.

To determine the most effective architecture, a parametric study was conducted, varying the number of hidden layers (1 or 2), the number of neurons per layer (ranging from 5 to 25), and the activation functions (hyperbolic tangent and logarithmic sigmoid). To ensure the reliability of the results and account for the sensitivity of gradient-based training to initial weights, each configuration was trained 20 times independently. Performance was measured by both the mean Root Mean Square Error (RMSE) and its standard deviation.

Experimental Datasets

The proposed method was validated on two distinct systems:

  1. Nuclear Reactor Power Level: Data from Indian Pressurized Heavy Water Reactors (PHWRs) provided by the Nuclear Power Corporation of India Ltd. The model predicts instantaneous reactor power based on control rod position, elapsed time, initial power, and rod drop percentage.
  2. AC Servo Position Control System: Experimental data from a GE Fanuc Versa Motion Servomotor. The model predicts angular position based on time, acceleration, and velocity.

A critical insight from the study was the inclusion of "time elapsed" as an explicit input feature. This allows the ANN to capture the temporal dynamics of the physical systems without needing a fixed sampling interval in the model structure.

Results and Discussion

The ANN successfully learned global nonlinear models for both systems. For the nuclear reactor, a single hidden layer with 15 neurons using the tansig activation function proved optimal, achieving a mean RMSE of $0.0014$.

Power transients and control rod positions representing different operating conditions for the nuclear reactor model.

As shown in the reactor data, the model must account for various initial power levels and step-back conditions. The ANN effectively "stitched" these local behaviors into a cohesive global model. Interestingly, the study found that single-hidden-layer networks often provided more consistent performance (lower standard deviation of error) than deeper architectures, which were more prone to getting trapped in local minima during training.

For the AC servo motor, the ANN accurately replicated complex "S-shaped" and "truncated ramp" position curves across different acceleration profiles. While a two-layer network achieved the absolute lowest error ($0.0021$ RMSE), single-layer versions were nearly as accurate and demonstrated greater stability across random initializations.

Conclusion

This research demonstrates that standard feed-forward ANNs can effectively model complex nonlinear dynamics by learning from multiple local operating conditions. This approach bypasses the need for complex analytical modeling while providing a robust global representation. While the optimal network architecture remains system-dependent and requires empirical tuning, these ANN-based models offer a powerful foundation for designing advanced nonlinear control systems.

Summary updated

BibTeX
@misc{saha2012identification,
  author = {Sayan Saha and Saptarshi Das and Anish Acharya and Abhishek Kumar and Sumit Mukherjee and Indranil Pan and Amitava Gupta},
  title = {{Identification of Nonlinear Systems From the Knowledge Around Different Operating Conditions: A Feed-Forward Multi-Layer ANN Based Approach}},
  year = {2012},
  eprint = {1212.3225},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1212.3225},
}
Figure