Square lattice gases with two- and three-body interactions revisited: A row-shifted<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mrow><mml:mn>2</mml:mn><mml:mo>×</mml:mo><mml:mn>2</mml:mn></mml:mrow><mml:mo>)</mml:mo></mml:mrow></mml:mrow></mml:math>phase

Junqi Yin, D. P. LandauPhysical 2010 · DOI · arXiv

Abstract

Monte Carlo simulations have been used to study the phase diagrams for square Ising-lattice-gas models with two- and three-body interactions for values of interaction parameters in a range that has not been previously considered. We find unexpected qualitative differences as compared with predictions made on general grounds.

Introduction: Revisiting the Square Lattice

In surface science, understanding how atoms arrange themselves on a crystal face is critical for predicting material properties. For decades, physicists have relied on "lattice gas" models to describe these patterns. However, many established schematic phase diagrams were based on "educated guesses" rather than rigorous calculation. In this work, Junqi Yin and D. P. Landau utilize modern computational power to revisit and correct phase diagrams that have stood for over 30 years, specifically focusing on the impact of strong three-body interactions.

The Problem: Beyond Two-Body Interactions

When atoms are adsorbed onto a surface, their arrangement is dictated by mutual interactions. While standard models often focus on two-body interactions (where atom A influences atom B), real-world surfaces frequently exhibit three-body effects—where the presence of a third atom modifies the interaction between the first two.

In 1981, Binder and Landau proposed schematic phase diagrams for these systems. While they simulated cases with weak three-body interactions, the diagrams for strong three-body interactions were largely theoretical extrapolations. This study puts those predictions to the test using advanced Monte Carlo techniques to determine if the hypothesized phase boundaries and triple points actually exist.

Methods

The researchers mapped the lattice gas model onto the mathematically equivalent Ising model. To overcome the challenges of complex phase space, they employed:

  • Parallel Tempering Monte Carlo: This technique prevents the system from becoming trapped in local energy minima by swapping configurations between different temperatures.
  • GPU Acceleration: Utilizing NVIDIA GeForce GTX285 units allowed for the simulation of large lattices (up to $300 \times 300$ sites), significantly exceeding the capabilities of 1980s hardware.
  • Finite-Size Scaling: By analyzing results across various lattice sizes ($L=32$ to $L=300$), they precisely determined critical points and universality classes.

Key Insights and Ideas: The Row-Shifted Phase

A central finding of this study is the characterization of the "row-shifted (2x2)" phase. In this state, alternate rows or columns can shift by one lattice constant without an energy penalty, leading to a high degree of degeneracy.

Lattice gas model with two- and three-body interactions (a) and the resulting ordered phases (b), including the row-shifted (2x2) structures.

The inclusion of three-body interactions fundamentally breaks the symmetry typically found in two-body models. In standard models, the phase diagram is symmetric around 50% coverage ($\theta = 0.5$). Here, the "lattice gas" (low density) and "lattice liquid" (high density) regions behave quite differently due to the asymmetric nature of three-body forces.

Key Results

The simulations revealed that previous schematic "guesses" were qualitatively incorrect. Notably, the predicted "triple point" where three phases meet was not observed in the simulated parameter range. Instead, the phase boundaries are more constrained than previously thought.

Temperature ($T$) vs. coverage ($\theta$) phase diagrams for various three-body interaction strengths $R_t$. Note the narrow stability regions for the row-shifted phases.

Key findings include:

  • Tricritical Point: For $R=1/4$ and $R_t=-1/4$, a tricritical point was identified at $k_B T/|J_{nn}| \approx 0.5915$.
  • Phase Stability: The "row-shifted (2x2)" phase is stable only over a very narrow coverage range, contradicting earlier diagrams that suggested a broader existence.
  • Ising Universality: Despite the complexity of many-body interactions, continuous phase transitions in this system still belong to the 2D Ising universality class.

Conclusion

This study demonstrates that even "simple" lattice models can yield unexpected results when many-body interactions are considered. The results suggest that the stability of the "row-shifted" phase is sensitive to the range of interactions; adding third-nearest-neighbor interactions would likely lift the degeneracy and lead to even more complex behavior. This work underscores the necessity of rigorous simulation in mapping the phase behavior of real-world adsorbed monolayers.

Summary updated

Abstract

Monte Carlo simulations have been used to study the phase diagrams for square Ising-lattice-gas models with two- and three-body interactions for values of interaction parameters in a range that has not been previously considered. We find unexpected qualitative differences as compared with predictions made on general grounds.
BibTeX
@inproceedings{yin2010square,
  author = {Junqi Yin and D. P. Landau},
  title = {{Square lattice gases with two- and three-body interactions revisited: A row-shifted<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mrow><mml:mn>2</mml:mn><mml:mo>×</mml:mo><mml:mn>2</mml:mn></mml:mrow><mml:mo>)</mml:mo></mml:mrow></mml:mrow></mml:math>phase}},
  booktitle = {Physical},
  year = {2010},
  doi = {10.1103/physreve.81.031121},
}
Figure