Spatial Scattering Modulation with Multipath Component Aggregation Based on Antenna Arrays

Jiliang Zhang, Wei Liu, Alan Tennant, Weijie Qi, Jiming Chen, Jie Zhang

Abstract

In this paper, a multipath component aggregation (MCA) mechanism is introduced for spatial scattering modulation (SSM) to overcome the limitation in conventional SSM that the transmit antenna array steers the beam to a single multipath (MP) component at each instance. In the proposed MCA-SSM system, information bits are divided into two streams. One is mapped to an amplitude-phase-modulation (APM) constellation symbol, and the other is mapped to a beam vector symbol which steers multiple beams to selected strongest MP components via an MCA matrix. In comparison with the conventional SSM system, the proposed MCA-SSM enhances the bit error performance by avoiding both low receiving power due to steering the beam to a single weak MP component and inter-MP interference due to MP components with close values of angle of arrival (AoA) or angle of departure (AoD). For the proposed MCA-SSM, a union upper bound (UUB) on the average bit error probability (ABEP) with any MCA matrix is analytically derived and validated via Monte Carlo simulations. Based on the UUB, the MCA matrix is analytically optimized to minimize the ABEP of the MCA-SSM. Finally, numerical experiments are carried out, which show that the proposed MCA-SSM system remarkably outperforms the state-of-the-art SSM system in terms of ABEP under a typical indoor environment.

Introduction

As researchers look toward 6G wireless communication, Spatial Scattering Modulation (SSM) has emerged as a promising technique. Unlike traditional systems, SSM leverages the physical environment—such as walls, pillars, and furniture—as part of the modulation process. By steering beams toward specific "scatterers" or multipath (MP) components, the system encodes information into the choice of the spatial path itself.

However, conventional SSM faces two critical challenges. First, if the system selects a single path that happens to have low gain, the connection becomes noisy and unreliable. Second, if two paths have very similar angles of arrival (AoA) or departure (AoD), the receiver struggles to distinguish them, leading to high interference. This research introduces Multipath Component Aggregation (MCA) to solve these issues by moving from single-path steering to a robust multi-path approach.

System Architecture

The proposed MCA-SSM architecture splits incoming information bits into two distinct streams. The first stream is mapped to standard amplitude-phase-modulation (APM) symbols (such as QAM or PSK). The second stream is mapped to a "beam vector symbol," which utilizes an MCA matrix to select a specific combination of the $N_s$ strongest multipath components simultaneously.

The end-to-end system architecture of the proposed MCA-SSM system, showing the flow from transmitter to receiver through a multipath wireless channel.

The MCA Mechanism and Optimization

The core innovation of this system is the MCA matrix ($\mathbf{W}$). Rather than acting as a simple switch, this matrix weights and divides power across multiple paths. This aggregation naturally increases the received signal power and provides diversity gain, making the system more resilient to fading.

Detailed internal structure of the MCA matrix block, illustrating the use of RF switches, power dividers, and phase shifters to aggregate multipath components.

To optimize this mechanism, the authors derived a Union Upper Bound (UUB) for the Bit Error Probability (ABEP). Using this mathematical framework, they developed an analytical solution (Theorem 1) to find the optimal MCA matrix. This optimization ensures maximum "distance" between signals at the receiver, making them significantly easier to decode even in complex environments.

Performance Evaluation

The system was evaluated using a deterministic channel model based on an Intelligent Ray Launching Algorithm (IRLA), simulating 952 different links in a typical indoor room (8.5m x 7m). The results demonstrate massive performance gains over state-of-the-art SSM:

  • Power Efficiency: To achieve a target bit error rate of $10^{-6}$, MCA-SSM required 20 dB less power using 16-PSK and nearly 30 dB less power using 16-QAM compared to conventional systems.
  • Scalability: The system scales effectively with hardware; increasing the antenna array from $4 \times 4$ to $16 \times 16$ provided an additional 10-20 dB gain.
  • Computational Efficiency: By focusing on subchannels with the highest eigenvalues, the detection algorithm's complexity is reduced, easing the burden on mobile hardware.

Conclusion

MCA-SSM represents a significant leap in spatial modulation, offering dramatic improvements in reliability and power efficiency. While current models assume perfect Channel State Information (CSI) and static environments, future work will focus on adapting the MCA matrix for dynamic real-world scenarios where movement constantly reshapes the multipath landscape.

Summary updated

Abstract

In this paper, a multipath component aggregation (MCA) mechanism is introduced for spatial scattering modulation (SSM) to overcome the limitation in conventional SSM that the transmit antenna array steers the beam to a single multipath (MP) component at each instance. In the proposed MCA-SSM system, information bits are divided into two streams. One is mapped to an amplitude-phase-modulation (APM) constellation symbol, and the other is mapped to a beam vector symbol which steers multiple beams to selected strongest MP components via an MCA matrix. In comparison with the conventional SSM system, the proposed MCA-SSM enhances the bit error performance by avoiding both low receiving power due to steering the beam to a single weak MP component and inter-MP interference due to MP components with close values of angle of arrival (AoA) or angle of departure (AoD). For the proposed MCA-SSM, a union upper bound (UUB) on the average bit error probability (ABEP) with any MCA matrix is analytically derived and validated via Monte Carlo simulations. Based on the UUB, the MCA matrix is analytically optimized to minimize the ABEP of the MCA-SSM. Finally, numerical experiments are carried out, which show that the proposed MCA-SSM system remarkably outperforms the state-of-the-art SSM system in terms of ABEP under a typical indoor environment.
BibTeX
@article{zhang2023spatial,
  author = {Jiliang Zhang and Wei Liu and Alan Tennant and Weijie Qi and Jiming Chen and Jie Zhang},
  title = {{Spatial Scattering Modulation with Multipath Component Aggregation Based on Antenna Arrays}},
  journal = {IEEE Transactions on Green Communications and Networking},
  year = {2023},
  doi = {10.1109/tgcn.2023.3315247},
}
Figure