Spatial Equalization Before Reception: Reconfigurable Intelligent Surfaces for Multi-Path Mitigation

Hongliang Zhang, Lingyang Song, Zhu Han, H. Vincent Poor

Introduction

In the evolving landscape of wireless communications, the demand for higher data rates and more reliable connections continues to grow. One of the primary obstacles to achieving these goals is multi-path fading. This phenomenon occurs when signals bounce off various environmental obstacles—such as buildings, vehicles, and indoor furniture—reaching the receiver at different times. The resulting time-dispersed signals lead to Inter-Symbol Interference (ISI), where successive data symbols overlap and distort one another, significantly limiting communication performance.

Traditionally, ISI is addressed at the receiver using complex equalization hardware and algorithms. However, as the density of mobile devices increases, the computational burden on individual user equipment (UE) becomes a significant bottleneck. This paper explores a paradigm shift: spatial equalization. By utilizing Reconfigurable Intelligent Surfaces (RIS), the authors propose to "pre-equalize" the wireless environment itself, mitigating interference before the signal even reaches the receiver.

The Concept of Spatial Equalization

The core idea is to transform the wireless channel from a passive, uncontrollable medium into a programmable one. An RIS is a planar surface composed of a large number of low-cost, passive reflecting elements. Each element can independently shift the phase of the incident electromagnetic wave.

System model of an RIS-assisted downlink network where the RIS acts as a spatial equalizer to mitigate multi-path scattering.

In the proposed system model, a base station transmits signals to multiple users. These signals travel via direct paths, natural scattering paths (multi-path scattering), and "artificial" paths created by the RIS. By carefully controlling the phase shifts of the RIS elements, the surface can generate reflections that destructively interfere with the natural multi-path components at the user locations, effectively shortening the channel impulse response and reducing ISI.

Optimization and the PSO Algorithm

To achieve effective spatial equalization for multiple users simultaneously, the authors formulate a "min-max" optimization problem. The objective is to minimize the maximum ISI power experienced among all users, ensuring a fair distribution of performance gains across the network.

The researchers developed a Phase Shift Optimization (PSO) algorithm to solve this complex problem. The algorithm leverages the Lagrange-Dual technique and a primal-dual gradient method. By iteratively updating the phase shifts of the RIS elements and the ISI constraints, the system converges toward an optimal configuration. A key mathematical insight used in the development of this algorithm is the application of Fourier transforms to relate time-domain ISI characteristics to the frequency domain, making the optimization of phase shifts more tractable.

Performance and Key Results

The effectiveness of the proposed spatial equalizer was evaluated using extensive Monte Carlo simulations based on 3GPP and Saleh-Valenzuela stochastic channel models. The results demonstrate that the RIS-based approach significantly improves signal quality compared to traditional non-RIS setups.

Comparison of the maximum power of normalized ISI versus the number of scattering paths for different optimization strategies.

As shown in the performance analysis, the proposed PSO algorithm consistently outperforms other strategies, such as Random Phase Shifts (RPS) and Discrete Phase Shifts (DPS). Even when the RIS is constrained by hardware limitations—such as 2-bit quantization (allowing only four possible phase angles)—it still provides a notable 1 dB improvement in ISI reduction over a system without an RIS. Furthermore, the system exhibits strong scaling properties: as the number of RIS elements increases, the surface gains more "degrees of freedom" to manipulate the environment, leading to even greater interference mitigation.

Insights and Future Directions

One of the most compelling aspects of this research is the concept of the RIS as a shared infrastructure. Unlike receiver-side equalizers that must be built into every device, a single RIS can serve as a common filter for all users in its vicinity. This "filter in the air" approach could lead to significant cost and energy savings for mobile hardware.

However, several challenges remain for practical implementation. The current study assumes perfect beamforming at the base station and relatively static environments. In highly mobile scenarios, the RIS would need to update its configuration at extremely high speeds, potentially pushing the limits of current PIN diode switching technology. Future work will likely focus on these dynamic environments and the overhead associated with controlling thousands of RIS elements in real-time.

Despite these challenges, spatial equalization represents a promising new frontier in wireless network design, moving us closer to a future where the environment itself is optimized for connectivity.

Summary updated

BibTeX
@inproceedings{zhang2021spatial,
  author = {Hongliang Zhang and Lingyang Song and Zhu Han and H. Vincent Poor},
  title = {{Spatial Equalization Before Reception: Reconfigurable Intelligent Surfaces for Multi-Path Mitigation}},
  booktitle = {IEEE International Conference on Acoustics, Speech and Signal Processing},
  year = {2021},
  doi = {10.1109/icassp39728.2021.9414612},
}
Figure