Solution-Processed Conducting Polymer/Metal Oxide Charge Generation Layer: Preparation, Electrical Properties, and Charge Generation Mechanism

Yong Lei, Zhen Liu, Changjun Fan, Xuefeng Peng, Xiaxia Ji, Guoqing Li, Zuhong Xiong, Xiaohui YangThe Journal of Physical Chemistry C 2016 · DOI

Abstract

Conducting polymer/metal oxide heterostructures have been commonly used in solution-processed tandem organic optoelectronic devices as charge generation layer (CGL) or charge recombination layer. However, the underlying working mechanism remains unexplored. We optimize the preparation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)/zinc oxide (ZnO) CGL and report that the configurations and compositions of the interconnects significantly affect the performance of light-emitting devices. Two-unit and in particular the first reported three-unit solution-processed tandem polymer light-emitting devices show the luminance efficiency matching the total luminance efficiency of the constituent two and three light-emitting units, respectively. Current–voltage and capacitance–voltage measurements on the devices with various interconnects indicate that charges are generated at the PEDOT:PSS/ZnO interface. CGL-generated current can be described with the Richardson–Schottky thermal emission model, yielding the barrier height close to the “effective band gap” of the PEDOT:PSS/ZnO heterostructure.
BibTeX
@article{lei2016solution,
  author = {Yong Lei and Zhen Liu and Changjun Fan and Xuefeng Peng and Xiaxia Ji and Guoqing Li and Zuhong Xiong and Xiaohui Yang},
  title = {{Solution-Processed Conducting Polymer/Metal Oxide Charge Generation Layer: Preparation, Electrical Properties, and Charge Generation Mechanism}},
  journal = {The Journal of Physical Chemistry C},
  year = {2016},
  doi = {10.1021/acs.jpcc.6b11838},
}

Loading related content...

Figure