Abstract
This study investigates the solidification of water plant sludge mixed with domestic waste incineration bottom ash (IBA) through cement addition. The solidification experiment was carried out by adding a constant amount of sulphoaluminate cement to varying dry ratios of sludge and IBA. The density and unconfined compressive strength (UCS) of the solidified bodies were tested, alongside chemical analysis of extracts. Results indicate that increasing the proportion of IBA enhances density and UCS while improving stability. However, high sludge content allows for persistent microbial activity, which negatively impacts structural integrity.
Introduction
China faces a significant challenge in managing sewage sludge, with annual production exceeding 60 million tons. Characterized by high water content, heavy metals, and organic pollutants, sludge is difficult to stabilize using standard cement hydration. This research explores a "waste-to-resource" strategy by mixing sludge with incineration bottom ash (IBA) to create stable solidified bodies suitable for resource utilization, such as landfill cover or temporary construction materials.
Methods
The study utilized sludge from the Beijing Yi-Zhuang plant (60% moisture) and IBA sieved to <8mm. Six mixing ratios (Treatments A-F) were tested, ranging from high sludge content (A) to high ash content (F). A quick-setting sulphoaluminate cement served as the binder. After a 30-day curing period, the specimens were evaluated for:
- Unconfined Compressive Strength (UCS): Measured via pressure testing.
- Density: To assess structural compactness.
- Leaching Behavior: Analysis of pH, Total Nitrogen (TN), and Total Phosphorus (TP) in extracts.
- Microbial Observation: Monitoring for biological growth during curing.
Results
The experimental data revealed a clear trend: as the proportion of incineration bottom ash increased, both the density and the UCS of the solidified bodies improved.
The UCS was found to be significantly correlated with density, with a correlation coefficient of 0.855. However, for samples with high sludge ratios (e.g., Treatment A), the maximum strength achieved was only 0.14 MPa. This aligns with broader industry findings where high sludge content typically limits strength to below 1 MPa, making these materials suitable primarily for non-load-bearing applications like landfill cover. Environmentally, the process successfully shifted the sludge extract from weakly acidic (pH 6.48) to alkaline (pH 10.57–11.58), effectively stabilizing nutrients.
Discussion
A critical finding of this study is the interference of organic matter and microbial activity with the solidification process. Organic pollutants in the sludge hinder cement hydration, leading to the poor performance of high-sludge treatments. Furthermore, biological activity was observed directly on the specimens.
White and yellow mycelium, likely actinomycetes originating from the sludge, were found on the surface of blocks with high sludge content. This microbial growth physically disrupts the matrix, further weakening the final product. While the solidification effectively "locked" in pollutants like Nitrogen and Phosphorus, the structural variability remains a hurdle for engineering applications.
Conclusion
While mixing sludge with incineration bottom ash shows promise for waste volume reduction and pollutant stabilization, the resulting material currently lacks the strength for load-bearing construction. Future research should focus on pre-treating organic matter, incorporating antibacterial agents to inhibit microbial growth, and optimizing chemical additives to improve the hydration reaction and overall block integrity.
Summary updated