Semi-Data-Aided Channel Estimation for MIMO Systems via Reinforcement Learning

Tae-Kyoung Kim, Yo–Seb Jeon, Jun Li, Nima Tavangaran, H. Vincent Poor

Abstract

Data-aided channel estimation is a promising solution to improve channel estimation accuracy by exploiting data symbols as pilot signals for updating an initial channel estimate. In this paper, we propose a semi-data-aided channel estimator for multiple-input multiple-output (MIMO) communication systems. Our strategy is to leverage reinforcement learning (RL) for selecting reliable detected symbols among the symbols in the first part of a transmitted data block. This strategy facilitates an update of the channel estimate before the end of data block transmission and therefore achieves a significant reduction in communication latency compared to conventional data-aided channel estimation approaches. Towards this end, we first define a Markov decision process (MDP) which sequentially decides whether to use each detected symbol as an additional pilot signal. We then develop an RL algorithm to efficiently find the best policy of the MDP based on a Monte Carlo tree search approach. In this algorithm, we exploit the a-posteriori probability for approximating both the optimal future actions and the corresponding state transitions of the MDP and derive a closed-form expression for the best policy. Simulation results demonstrate that the proposed channel estimator effectively mitigates both channel estimation error and detection performance loss caused by insufficient pilot signals.

1. Introduction

In modern wireless communication, Multiple-Input Multiple-Output (MIMO) technology is fundamental for achieving high spectral efficiency. However, the performance of MIMO systems heavily relies on accurate Channel State Information (CSI) at the receiver. Traditionally, CSI is obtained via pilot signals—pre-known sequences that consume valuable bandwidth. As the number of antennas increases, the overhead from pilots grows, reducing the throughput available for actual data.

Data-aided channel estimation (DACE) offers a solution by treating detected data symbols as "virtual pilots" to refine the initial channel estimate. Despite its potential, DACE faces two primary challenges: error propagation and high latency. Error propagation occurs when incorrectly detected symbols are used as pilots, "poisoning" the estimate. Latency arises because conventional iterative DACE methods typically wait for an entire data block to be decoded before updating the channel, which is unsuitable for real-time applications.

2. System Model and Semi-Data-Aided Strategy

To address these issues, we propose a semi-data-aided channel estimation framework. Unlike traditional methods that process the entire block, our approach updates the channel estimate mid-transmission.

MIMO system model and the proposed semi-data-aided frame structure showing initial and updated channel estimation phases.

As illustrated in Figure 1, the transmission frame consists of a pilot block of length $T_p$ followed by a data block of length $T_d$. An initial channel estimate, $\hat{\mathbf{H}}_p$, is derived from the pilot signals. The receiver then detects the first $T_u$ data symbols using $\hat{\mathbf{H}}_p$. A Reinforcement Learning (RL) agent selectively identifies reliable symbols from this initial set to perform a semi-data-aided update, resulting in an improved estimate $\hat{\mathbf{H}}_u$. This updated estimate is then used to detect the remaining $T_d - T_u$ symbols in the block, significantly reducing the latency associated with waiting for the full block transmission.

3. Reinforcement Learning for Symbol Selection

The selection of reliable data symbols is modeled as a Markov Decision Process (MDP). The RL agent evaluates a sequence of detected symbols and must decide: "Should I use this specific symbol to update my channel estimate?"

To solve this MDP efficiently, we employ a modified Monte Carlo Tree Search (MCTS) algorithm. A key innovation is the use of a-posteriori probability (APP) from the data detector as a proxy for ground truth. By weighting potential future rewards with the detector's confidence levels, the agent can make optimal decisions without knowing the actual transmitted bits. We further derive a closed-form expression for the optimal policy, which avoids the need for heavy real-time simulations and allows for low-complexity implementation.

4. Performance Evaluation

The proposed method was evaluated in a $2 \times 4$ MIMO system using 4-QAM modulation and Turbo coding over Rayleigh fading channels. Simulation results indicate that the RL-based estimator significantly reduces the Normalized Mean Squared Error (NMSE) compared to standard pilot-only estimation.

Key findings include:

  • Robustness: The RL agent effectively rejects unreliable symbols, preventing the performance degradation seen in simpler data-aided strategies at low Signal-to-Noise Ratios (SNR).
  • Latency and Efficiency: By updating the channel after only a fraction of the data block, the system achieves the accuracy of full iterative methods with much lower latency. Furthermore, a system using only 4 pilots with our RL approach outperformed a standard 8-pilot system, effectively doubling pilot efficiency.
  • Tracking: In time-varying scenarios, the agent successfully tracks channel fluctuations by continuously selecting fresh, reliable data symbols for updates.

5. Conclusion

This paper presents a novel semi-data-aided channel estimation strategy for MIMO systems leveraging RL. By selectively using reliable data symbols to update the channel estimate mid-transmission, we achieve high accuracy and low latency. Future work will focus on extending this framework to wideband OFDM systems and exploring alternative reward functions to directly optimize throughput.

Summary updated

Abstract

Data-aided channel estimation is a promising solution to improve channel estimation accuracy by exploiting data symbols as pilot signals for updating an initial channel estimate. In this paper, we propose a semi-data-aided channel estimator for multiple-input multiple-output communication systems. Our strategy is to leverage reinforcement learning (RL) for selecting reliable detected symbols among the symbols in the first part of transmitted data block. This strategy facilitates an update of the channel estimate before the end of data block transmission and therefore achieves a significant reduction in communication latency compared to conventional data-aided channel estimation approaches. Towards this end, we first define a Markov decision process (MDP) which sequentially decides whether to use each detected symbol as an additional pilot signal. We then develop an RL algorithm to efficiently find the best policy of the MDP based on a Monte Carlo tree search approach. In this algorithm, we exploit the a-posteriori probability for approximating both the optimal future actions and the corresponding state transitions of the MDP and derive a closed-form expression for the best policy. Simulation results demonstrate that the proposed channel estimator effectively mitigates both channel estimation error and detection performance loss caused by insufficient pilot signals.
BibTeX
@article{kim2023semi,
  author = {Tae-Kyoung Kim and Yo–Seb Jeon and Jun Li and Nima Tavangaran and H. Vincent Poor},
  title = {{Semi-Data-Aided Channel Estimation for MIMO Systems via Reinforcement Learning}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2023},
  doi = {10.1109/twc.2022.3227312},
}
Figure