Semi-classical electronic transport properties of ternary compound AlGaAs$_2$: Role of different scattering mechanisms

Soubhik Chakrabarty, Anup Kumar Mandia, Bhaskaran Muralidharan, Seung‐Cheol Lee, Satadeep Bhattacharjee

Abstract

This study presents a comprehensive investigation into the semi-classical transport properties of $n$-type ternary AlGaAs$_2$ using Rode's iterative method. By incorporating four primary scattering mechanisms—ionized impurity, piezoelectric, acoustic deformation, and polar optical phonon (POP)—calculated via ab-initio parameters, we compare two crystal geometries: tetragonal (TET) and body-centered tetragonal (BCT). Our findings reveal that the BCT phase exhibits superior electron mobility, primarily due to its conduction band curvature. At room temperature, POP scattering is the dominant factor limiting mobility. Furthermore, we demonstrate that the standard Relaxation Time Approximation (RTA) significantly underestimates mobility compared to the more rigorous Rode’s approach.

Introduction

Binary semiconductors like Gallium Arsenide (GaAs) have long been the backbone of high-frequency electronics. However, the evolving demands of optoelectronics and high-speed devices require materials with greater "tunability." Ternary compounds, such as AlGaAs$_2$, offer a promising solution by allowing researchers to engineer band structures through compositional and structural variations.

A critical challenge in developing these materials is the accurate prediction of carrier transport. Most conventional models rely on the Relaxation Time Approximation (RTA), which assumes scattering events are elastic and isotropic. While computationally efficient, RTA fails to capture the physics of polar III-V semiconductors at room temperature, where Polar Optical Phonon (POP) scattering dominates. Because POP scattering is inelastic and non-randomizing, a more sophisticated approach is required to predict device performance accurately.

Computational Methodology

This research employs a first-principles framework combining Density Functional Theory (DFT) with Rode’s iterative method to solve the Boltzmann Transport Equation (BTE).

Ab-initio Calculations

Using the Vienna Ab-initio Simulation Package (VASP), the electronic structure of AlGaAs$_2$ was determined. This included calculating band dispersions, density of states (DOS), and dielectric constants. These parameters serve as the foundational input for transport modeling, ensuring the results are derived from fundamental physical constants rather than empirical fitting.

Rode’s Iterative Method

To overcome the limitations of RTA, the authors utilized Rode’s iterative method. This technique accounts for the inelastic nature of POP scattering by iteratively solving the BTE until the electron distribution function converges. This approach is essential for materials where the scattering rate depends on the state of the electron before and after the event in a non-trivial way. The methodology was validated using the AMMCR code by comparing results for $n$-type ZnSe against established experimental data.

Structural and Electronic Properties

The study focuses on two distinct phases of AlGaAs$_2$:

  1. Tetragonal (TET) phase: Space group $P\bar{4}m2$.
  2. Body-Centered Tetragonal (BCT) phase: Space group $I\bar{4}2d$.

Both phases were confirmed to be mechanically and dynamically stable through phonon dispersion and Born stability criteria. Electronic structure analysis revealed that both are direct band gap semiconductors, with the TET phase possessing a gap of 0.99 eV and the BCT phase a gap of 0.86 eV.

A pivotal discovery was the difference in conduction band curvature. The BCT phase exhibits a more pronounced curvature in its $E-k$ graph compared to the TET phase. In semiconductor physics, higher curvature at the band minimum translates to a lower effective electron mass. Consequently, electrons in the BCT phase experience less "inertia" and can achieve higher velocities under an applied electric field.

Transport Properties and Scattering Mechanisms

The research analyzed four scattering mechanisms: ionized impurity, piezoelectric, acoustic deformation, and polar optical phonon (POP) scattering.

The Dominance of POP Scattering

At room temperature (300 K), POP scattering was identified as the primary bottleneck for electron mobility in both phases. Because RTA cannot properly model the momentum retention associated with inelastic POP scattering, it consistently predicts lower mobility values than Rode’s method. This suggests that the potential of AlGaAs$_2$ (and similar III-V compounds) may be undervalued in literature relying solely on RTA.

Temperature and Doping Effects

The relative importance of scattering mechanisms shifts with temperature:

  • Low Temperature (50 K): At low carrier concentrations, piezoelectric scattering is the dominant mechanism. As doping increases, ionized impurity scattering becomes the primary limiting factor.
  • High Temperature (300 K): POP scattering remains the dominant mechanism across most doping levels.

In both phases, electron mobility remains relatively stable at low carrier concentrations but drops sharply once doping levels exceed $10^{13}$ to $10^{15}$ cm$^{-3}$, depending on the specific thermal environment.

Conclusion

The BCT phase of AlGaAs$_2$ emerges as a superior candidate for high-mobility electronic applications compared to the TET phase. By utilizing Rode’s iterative method and ab-initio parameters, this study provides a high-fidelity look at the transport physics of ternary compounds. The findings highlight the necessity of moving beyond RTA for accurate material characterization and suggest that BCT AlGaAs$_2$ is a viable material for future high-speed device architectures, such as High-Electron-Mobility Transistors (HEMTs). Future work should involve experimental synthesis to validate these theoretical predictions and explore $p$-type transport properties.

Summary updated

Abstract

We present a comprehensive investigation of semi-classical transport properties of n-type ternary compound AlGaAs2, using Rode's iterative method. Four scattering mechanisms, have been included in our transport calculation, namely, ionized impurity, piezoelectric, acoustic deformation and polar optical phonon (POP). The scattering rates have been calculated in terms of ab-initio parameters. We consider AlGaAs2 to have two distinct crystal geometries, one in tetragonal phase (space group: ), while the other one having body centered tetragonal crystal structure (space group:). We have observed higher electron mobility in the body centered tetragonal phase, thereby making it more suitable for high mobility device application, over the tetragonal phase. In order to understand the differences in electron moblities for these two phases, curvatures of the E-k graph of the conduction bands for these phases have been compared. At room temperature, the dominant contribution in electron mobility was found to be provided by inelastic POP scattering. We have also noted that mobility is underestimated in relaxation time approximation as compared with the Rode's iterative approach.
BibTeX
@article{chakrabarty2019semi,
  author = {Soubhik Chakrabarty and Anup Kumar Mandia and Bhaskaran Muralidharan and Seung‐Cheol Lee and Satadeep Bhattacharjee},
  title = {{Semi-classical electronic transport properties of ternary compound AlGaAs$\_2$: Role of different scattering mechanisms}},
  journal = {Journal of Physics Condensed Matter},
  year = {2019},
  doi = {10.1088/1361-648x/ab5edf},
}
Figure