Secure Beamforming for Continuous Aperture Array (CAPA) Systems

Mingjun Sun, Chongjun Ouyang, Zhaolin Wang, Shaochuan Wu, Yuanwei Liu

TL;DR

This paper introduces a high-performance, low-complexity framework for secure communication in 6G Continuous Aperture Array (CAPA) systems. By moving beyond discrete antenna arrays to continuous electromagnetic surfaces, the authors develop optimization and heuristic methods that significantly boost secrecy rates while being orders of magnitude faster than existing Fourier-based discretization techniques.

What Problem Does This Paper Address?

As we look toward 6G, traditional Multiple-Input Multiple-Output (MIMO) systems are hitting a physical wall. Because they rely on discrete antenna elements, there is a limit to how much "spatial intelligence" we can pack into a specific area. CAPA (often called the ultimate version of holographic MIMO) solves this by using a continuous radiating surface, theoretically allowing us to exploit every available bit of spatial "Degrees of Freedom" (DoF).

However, securing these systems is tricky. In a downlink scenario where a base station sends data to multiple legitimate users (LUTs) while eavesdroppers (Eves) try to listen in, we need to design "current patterns" on the CAPA surface that maximize the Weighted Secrecy Sum-Rate (WSSR). Existing methods usually try to approximate this continuous surface using Fourier series discretization, but this leads to a "complexity explosion" as the frequency or the size of the array increases.

Methods

The authors propose two primary solutions to design secure beamforming current patterns:

  1. FP-based BCD (Fractional Programming based Block Coordinate Descent): This is the core contribution. Instead of chopping the surface into discrete pieces, the authors use continuous-function inversion theory (the continuous equivalent of matrix inversion). They prove that the optimal current pattern is actually a linear combination of the channel spatial responses. This is a massive win because it eliminates the need for complex integration during the optimization process.
  2. ZF-based Heuristic (Zero-Forcing): For scenarios where computational speed is paramount, they developed a heuristic that nullifies interference and leakage entirely using the channel correlation matrix. They then apply a "water-filling" algorithm to allocate power optimally across users.

Datasets

This research is based on theoretical modeling and validated through Monte Carlo simulations. The authors did not use a static dataset but rather simulated a CAPA environment with the following parameters:

  • System Setup: 8 legitimate users and 3 eavesdroppers randomly placed in a 3D volume.
  • Hardware: A square CAPA surface (0.25 m² to 0.5 m²) operating at 2.4 GHz and 7.8 GHz.
  • Benchmarks: They compared their results against discrete MIMO systems, traditional Maximum Ratio Transmission (MRT), and state-of-the-art Fourier-based discretization methods.

Key Insights and Ideas

  • The "Linear Combination" Breakthrough: The most significant insight is that the optimal source current doesn't need to be solved for every infinite point on the surface. It can be represented as a weighted sum of the users' and eavesdroppers' channel responses. This reduces a continuous-domain problem into a much simpler coefficient-finding problem.
  • CAPA vs. Discrete MIMO: CAPA provides a much higher "energy aggregation" capability. Even simple beamforming on a CAPA surface can outperform sophisticated optimization on a discrete MIMO array because the continuous surface captures more spatial information.
  • Complexity Scaling: Traditional Fourier methods become unusable as we move to higher frequencies (like those planned for 6G) because the number of required Fourier bases grows quadratically. The proposed method’s complexity is tied to the number of users, not the frequency, making it future-proof.

Key Results

  • Secrecy Gains: At moderate power levels, the proposed CAPA optimization achieved a 77% improvement in WSSR compared to optimized discrete MIMO, and the ZF-based CAPA scheme showed a 117% improvement over ZF-MIMO.
  • Computational Speedup: The difference in runtime is dramatic. At 7.8 GHz with a 0.5 m² aperture, the proposed method took 1.25 seconds, while the Fourier-based benchmark took over 1,031 seconds (a ~800x speedup).
  • Asymptotic Performance: The heuristic ZF approach was shown to converge toward the optimal FP-BCD solution in high Signal-to-Noise Ratio (SNR) regions, offering a "best of both worlds" for high-power 6G base stations.

Limitations and Future Work

  • Perfect CSI Assumption: The paper assumes the base station has perfect Channel State Information (CSI) for both users and eavesdroppers (assuming Eves are "disguised" as legitimate users). In real-world "passive" eavesdropping scenarios, obtaining Eve's CSI is much harder.
  • Worst-Case Security: The model assumes all eavesdroppers can collaborate perfectly. While this provides a robust "lower bound" for security, it may be overly pessimistic for some deployments.
  • Future Directions: The authors suggest extending this work to near-field communications (where the wavefront is spherical rather than planar) and accounting for hardware impairments in the continuous radiating surface.

Summary updated

Abstract

Continuous aperture array (CAPA) is considered a promising technology for 6G networks, offering the potential to fully exploit spatial DoFs and achieve the theoretical limits of channel capacity. This paper investigates the performance gain of a CAPA-based downlink secure transmission system, where multiple legitimate user terminals (LUTs) coexist with multiple eavesdroppers (Eves). The system's secrecy performance is evaluated using a weighted secrecy sum-rate (WSSR) under a power constraint. We then propose two solutions for the secure current pattern design. The first solution is a block coordinate descent (BCD) optimization method based on fractional programming, which introduces a continuous-function inversion theory corresponding to matrix inversion in the discrete domain. This approach derives a closed-form expression for the optimal source current pattern. Based on this, it can be found that the optimal current pattern is essentially a linear combination of the channel spatial responses, thus eliminating the need for complex integration operations during the algorithm's optimization process. The second solution is a heuristic algorithm based on Zero-Forcing (ZF), which constructs a zero-leakage current pattern using the channel correlation matrix. It further employs a water-filling approach to design an optimal power allocation scheme that maximizes the WSSR. In high SNR regions, this solution gradually approaches the first solution, ensuring zero leakage while offering lower computational complexity. Simulation results demonstrate that: 1) CAPA-based systems achieve better WSSR compared to discrete multiple-input multiple-output systems. 2) The proposed methods, whether optimization-based or heuristic, provide significant performance improvements over existing state-of-the-art Fourier-based discretization methods, while considerably reducing computational complexity.
BibTeX
@article{sun2026secure,
  author = {Mingjun Sun and Chongjun Ouyang and Zhaolin Wang and Shaochuan Wu and Yuanwei Liu},
  title = {{Secure Beamforming for Continuous Aperture Array (CAPA) Systems}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2026},
  doi = {10.1109/twc.2025.3640650},
}
Figure