RuO2 electronic structure and lattice strain dual engineering for enhanced acidic oxygen evolution reaction performance

Qin Yin, Tingting Yu, Sihao Deng, Xiaoye Zhou, Dongmei Lin, Qian Zhang, Zeyu Jin, Danfeng Zhang, Yan‐Bing He, Hua‐Jun Qiu, Lunhua He, Feiyu Kang, Kaikai Li, Tong‐Yi ZhangNature Communications 2022 · DOI

TL;DR

Researchers have developed a novel method to significantly enhance the performance of ruthenium dioxide (RuO₂) catalysts for the oxygen evolution reaction (OER) in acidic environments. By electrochemically intercalating lithium ions into RuO₂, they achieved a breakthrough in both catalytic activity and long-term stability, addressing key limitations in water splitting technology.

What Problem Does This Paper Address?

The oxygen evolution reaction (OER) is a critical bottleneck in electrochemical water splitting, a promising technology for sustainable hydrogen production. OER is a complex four-electron transfer process that suffers from sluggish kinetics, requiring high energy input. Furthermore, existing electrocatalysts, particularly ruthenium dioxide (RuO₂), which is a benchmark for acidic OER, face significant challenges with catalyst dissolution and degradation in harsh acidic conditions. This limits their practical application and efficiency. The paper aims to overcome these limitations by developing a RuO₂-based catalyst with improved activity and durability for acidic OER.

Methods

The core of this research lies in an electrochemical lithium intercalation method. This technique involves using a lithium foil counter-electrode and a RuO₂ working electrode in a coin cell setup with a LiPF₆ electrolyte. By controlling the discharge time during this electrochemical process, the researchers could precisely tune the amount of lithium intercalated into the RuO₂ lattice, creating a series of LiₓRuO₂ materials.

Key characterization techniques employed include:

  • X-ray Diffraction (XRD): To analyze the crystal structure and identify phase transitions during lithiation. Operando XRD was used to monitor structural changes in real-time.
  • High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM): To visualize the crystal structure at the atomic level and assess lattice strain.
  • X-ray Photoelectron Spectroscopy (XPS) and X-ray Absorption Spectroscopy (XAS) (K-edge and O K-edge): To probe the electronic structure, including the valence state of Ru and the nature of Ru-O bonding.
  • Density Functional Theory (DFT) calculations: To understand the fundamental electronic and structural changes induced by lithium intercalation and to model the OER mechanism.
  • Electrochemical measurements: Including linear sweep voltammetry (LSV) for activity assessment, chronopotentiometry for durability testing, and Tafel plots to elucidate reaction kinetics.
  • Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES): To quantify the dissolution of Ru from the catalyst during OER.

Datasets

Not discussed in the paper. The study focuses on synthesizing and characterizing new materials and evaluating their performance, rather than training on existing datasets.

Key Insights and Ideas

  • Dual Engineering Strategy: The paper highlights the power of simultaneously engineering both the electronic structure and lattice strain of RuO₂ through lithium intercalation. This synergistic approach is key to achieving superior OER performance.
  • Suppression of Ru Dissolution: Lithium intercalation leads to a lowered Ru valence state and weakened Ru-O covalency, forming a stable Li-O-Ru local structure. This significantly suppresses the dissolution of Ru in acidic media, a major hurdle for RuO₂ stability.
  • Activation of Lattice Oxygen: The induced lattice strain in LiₓRuO₂ distorts the surface structure, activating dangling oxygen atoms. These activated oxygen atoms act as proton acceptors, stabilizing the crucial OOH* intermediate and dramatically enhancing the OER activity.
  • Breaking the Scaling Relation: The combined effects of electronic structure modification and lattice strain allow the catalyst to overcome the theoretical overpotential ceiling imposed by the scaling relation between OER intermediates.
  • Tunable Lithium Concentration: The electrochemical intercalation method offers precise control over the lithium content (x), allowing for optimization of the catalyst's properties.

Key Results

  • Record Low Overpotential: The optimized Li₀.₅₂RuO₂ catalyst achieved an exceptionally low overpotential of 156 mV at a current density of 10 mA cm⁻² in 0.5 M H₂SO₄.
  • Exceptional Durability: The Li₀.₅₂RuO₂ catalyst demonstrated remarkable stability, operating continuously for 70 hours with negligible overpotential increase during chronopotentiometry tests at 10 mA cm⁻².
  • Reduced Ru Dissolution: ICP-OES analysis showed that the percentage of dissolved Ru from Li₀.₅₂RuO₂ after 48 hours of OER at 10 mA cm⁻² was only 1.9%, significantly lower than previously reported values for similar catalysts.
  • Enhanced Intrinsic Activity: The improved OER activity was confirmed to be due to intrinsic changes in the catalyst, not just increased electrochemically active surface area (ECSA).
  • Lower Tafel Slope: The Tafel slope decreased from 105.8 mV dec⁻¹ for pristine RuO₂ to 83.3 mV dec⁻¹ for Li₀.₅₂RuO₂, indicating enhanced electrocatalytic kinetics.

Limitations and Future Work

  • Scaling Up: While the electrochemical intercalation method offers precise control, scaling this process for industrial applications might present engineering challenges.
  • Further Optimization: The paper suggests that future efforts could focus on optimizing the free energy of each OER step to approach the equilibrium potential of 1.23 V, potentially leading to even higher efficiencies.
  • Broader Applicability: Investigating the performance of this Li-intercalated RuO₂ system in other acidic electrolytes or under different operating conditions could expand its potential applications.
  • Understanding Complex Interactions: While DFT calculations provide valuable insights, further theoretical and experimental studies could delve deeper into the intricate interplay between lithium, ruthenium, and oxygen in the active sites.

Summary updated

Abstract

Developing highly active and durable electrocatalysts for acidic oxygen evolution reaction remains a great challenge due to the sluggish kinetics of the four-electron transfer reaction and severe catalyst dissolution. Here we report an electrochemical lithium intercalation method to improve both the activity and stability of RuO<sub>2</sub> for acidic oxygen evolution reaction. The lithium intercalates into the lattice interstices of RuO<sub>2</sub>, donates electrons and distorts the local structure. Therefore, the Ru valence state is lowered with formation of stable Li-O-Ru local structure, and the Ru-O covalency is weakened, which suppresses the dissolution of Ru, resulting in greatly enhanced durability. Meanwhile, the inherent lattice strain results in the surface structural distortion of Li<sub>x</sub>RuO<sub>2</sub> and activates the dangling O atom near the Ru active site as a proton acceptor, which stabilizes the OOH* and dramatically enhances the activity. This work provides an effective strategy to develop highly efficient catalyst towards water splitting.
BibTeX
@inproceedings{yin2022ruo,
  author = {Qin Yin and Tingting Yu and Sihao Deng and Xiaoye Zhou and Dongmei Lin and Qian Zhang and Zeyu Jin and Danfeng Zhang and Yan‐Bing He and Hua‐Jun Qiu and Lunhua He and Feiyu Kang and Kaikai Li and Tong‐Yi Zhang},
  title = {{RuO2 electronic structure and lattice strain dual engineering for enhanced acidic oxygen evolution reaction performance}},
  booktitle = {Nature Communications},
  year = {2022},
  doi = {10.1038/s41467-022-31468-0},
}
Figure