Robust NOMA-assisted OTFS-ISAC Network Design with 3D Motion Prediction Topology

Luping Xiang, Ke Xu, Jie Hu, Christos Masouros, Kun Yang

Abstract

This paper proposes a novel non-orthogonal multiple access (NOMA)-assisted orthogonal time-frequency space (OTFS)-integrated sensing and communication (ISAC) network, which uses unmanned aerial vehicles (UAVs) as air base stations to support multiple users. By employing ISAC, the UAV extracts position and velocity information from the user's echo signals, and non-orthogonal power allocation is conducted to achieve a superior achievable rate. A 3D motion prediction topology is used to guide the NOMA transmission for multiple users, and a robust power allocation solution is proposed under perfect and imperfect channel estimation for Maxi-min Fairness (MMF) and Maximum sum-Rate (SR) problems. Simulation results demonstrate the superiority of the proposed NOMA-assisted OTFS-ISAC system over other systems in terms of achievable rate under both perfect and imperfect channel conditions with the aid of 3D motion prediction topology.

Introduction

Next-generation (6G) wireless networks face significant hurdles in high-mobility scenarios, such as fast-moving vehicles or aerial drones. Traditional Orthogonal Frequency Division Multiplexing (OFDM) struggles with severe Doppler shifts, and the overhead required for frequent channel estimation via pilot signals significantly reduces spectral efficiency. This paper introduces a sophisticated framework combining Integrated Sensing and Communication (ISAC), Orthogonal Time-Frequency Space (OTFS) modulation, and Non-Orthogonal Multiple Access (NOMA) to address these challenges. By deploying these technologies on a UAV acting as an aerial base station, the system can track mobile users in 3D and maintain high-speed data links.

Challenges in High-Mobility 6G Networks

The transition to 6G requires overcoming three primary issues:

  1. The Doppler Problem: High-speed movement causes Doppler shifts that degrade standard waveforms.
  2. The Overhead Problem: Fast-changing environments require frequent pilot signals, consuming bandwidth.
  3. The NLOS Blind Spot: While ISAC uses radar echoes to sense user locations, it primarily captures Line-of-Sight (LOS) paths, often missing complex Non-Line-of-Sight (NLOS) reflections that contribute to the communication channel.
LOS and NLOS paths in an ISAC system.

Proposed Methodology

The researchers propose a multi-layered solution integrating several advanced techniques:

OTFS Modulation and ISAC-based Sensing

OTFS operates in the Delay-Doppler (DD) domain, making it inherently robust to frequency shifts. Simultaneously, the UAV functions as a radar, analyzing echo signals to extract user distance, velocity, and angle. Because the parameters for radar sensing (delay and Doppler) align with the OTFS communication channel parameters, sensing effectively provides a "shortcut" to channel estimation, enabling "pilot-free" communication.

3D Motion Prediction Topology

A core innovation is the 3D topological model. By analyzing historical echo data, the UAV predicts a user's future position and trajectory. This predictive capability allows the system to bypass traditional pilot-based estimation, significantly saving bandwidth. Moving to 3D is critical for aerial base stations where the elevation angle to the user changes constantly.

3D motion prediction topology for UAV-to-vehicle communication.

NOMA Power Allocation and Robust Design

To serve multiple users simultaneously, the system employs NOMA. The authors derived closed-form solutions for two optimization goals: Maxi-min Fairness (MMF) to ensure quality for the worst-case user, and Maximum Sum-Rate (SR) to maximize total throughput. Recognizing that radar sensing is "blind" to NLOS paths, the design incorporates robust power allocation formulas that treat these missing reflections as statistical errors.

Key Results and Insights

Numerical simulations using a 5 GHz carrier frequency and user speeds up to 120 km/h validated the model:

  • Tracking Accuracy: The 3D motion prediction model achieved an estimation error of only ~2%, successfully recovering the user's actual position and trajectory.
  • Superior Throughput: The NOMA-assisted OTFS-ISAC system outperformed standard OMA and non-sensing NOMA systems, achieving data rates nearly 50% higher than OMA benchmarks at high SNR.
  • Mobility Robustness: Performance remained stable even at 120 km/h, whereas systems without motion prediction suffered significant degradation as the "position gap" widened.

Conclusion

This work demonstrates that integrating sensing into the communication framework allows for more efficient use of spectrum in high-mobility environments. While future work must address user blockage and hardware constraints, the proposed 3D motion prediction and robust NOMA allocation provide a strong foundation for future aerial 6G networks.

Summary updated

Abstract

This paper proposes a novel non-orthogonal multiple access (NOMA)-assisted orthogonal time-frequency space (OTFS)-integrated sensing and communication (ISAC) network, which uses unmanned aerial vehicles (UAVs) as air base stations to support multiple users. By employing ISAC, the UAV extracts position and velocity information from the user's echo signals, and non-orthogonal power allocation is conducted to achieve a superior achievable rate. A 3D motion prediction topology is used to guide the NOMA transmission for multiple users, and a robust power allocation solution is proposed under perfect and imperfect channel estimation for Maxi-min Fairness (MMF) and Maximum sum-Rate (SR) problems. Simulation results demonstrate the superiority of the proposed NOMA-assisted OTFS-ISAC system over other systems in terms of achievable rate under both perfect and imperfect channel conditions with the aid of 3D motion prediction topology.
BibTeX
@article{xiang2024robust,
  author = {Luping Xiang and Ke Xu and Jie Hu and Christos Masouros and Kun Yang},
  title = {{Robust NOMA-assisted OTFS-ISAC Network Design with 3D Motion Prediction Topology}},
  journal = {IEEE Internet of Things Journal},
  year = {2024},
  doi = {10.1109/jiot.2024.3352391},
}
Figure