Abstract
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmWave demonstrates promising performance in achieving high gain and directivity by using phase shifters at the analog processing block. What remains a problem, however, is the actual implementation of mmWave beamforming systems; to fabricate such a system is costly and complex. With the aim of reducing such cost and complexity, this article presents actual prototypes of the lens antenna as an effective device to be used in the future 5G mmWave hybrid beamforming systems. Using a lens as a passive phase shifter enables beamforming without the heavy network of active phase shifters, while gain and directivity are achieved by the energy-focusing property of the lens. Proposed in this article are two types of lens antennas, one for static and the other for mobile usage. Their performance is evaluated using measurements and simulation data along with link-level analysis via a software defined radio (SDR) platform. Results show the promising potential of the lens antenna for its high gain and directivity, and its improved beam-switching feasibility compared to when a lens is not used. System-level evaluations reveal the significant throughput enhancement in both real indoor and outdoor environments. Moreover, the lens antenna's design issues are also discussed by evaluating different lens sizes.
Introduction
The transition to millimeter-wave (mmWave) frequencies is a cornerstone of 5G technology, promising data rates between 10 and 50 Gbps. However, these high frequencies suffer from significant path loss. To mitigate this, massive MIMO and beamforming are employed to concentrate signal energy into narrow, high-gain beams. Traditional hybrid beamforming relies on complex analog phase-shifter networks, which are expensive and power-intensive at mmWave scales. This paper explores a hardware-efficient alternative: using passive RF lenses to achieve high gain and directivity.
System Architecture and Design
The proposed system replaces active phase shifters with a physical lens and a simple switch network. The lens acts as a refracting device that modifies the phase of the signal based on its entry point, effectively functioning as a "spatial Fourier transformer."
Instead of using all antennas at once with phase shifters, the system simply switches on the specific antenna port that aligns with the desired focal point of the lens. The researchers developed two primary prototypes to address different use cases:
- Static-User Lens Antenna (SULA): A cube-shaped polyethylene lens paired with a 2x2 patch array, designed for fixed, high-gain links like wireless backhaul.
- Mobile-User Lens Antenna (MULA): Optimized for beam-switching, this design uses a 4x4 patch array behind a lens. By activating different ports, the system steers the beam to various angles without mechanical movement.
Performance Evaluation
The prototypes were evaluated using HFSS electromagnetic simulations, anechoic chamber measurements, and real-time link testing via a Software Defined Radio (SDR) platform.
Key Insights
- Energy Focusing: The lens concentrates signal power into sub-regions of the array, allowing high directivity while keeping most RF chains inactive. Without the lens, the patch arrays have nearly zero directivity; adding the lens provides a "free" gain boost of 12–17 dB.
- Design Trade-offs: For mobile applications (MULA), increasing lens size significantly helps the "edge" ports (those furthest from the center) catch the focal region, though this increases the physical bulk of the device.
- Interference Rejection: The lens's sharp beams (narrow Half Power Beamwidth) naturally reduce inter-user interference in multi-user scenarios, leading to higher overall system throughput.
Results
- Gain and Precision: The SULA achieved a 12–17 dB gain increase. The MULA demonstrated precise spatial targeting with a half-power beamwidth (HPBW) as narrow as ±6.5°.
- Throughput Gains: In outdoor Non-Line-of-Sight (NLoS) simulations modeled on Rosslyn, Virginia, the lens-equipped system reached 16.9 Gbps, compared to only 3.9 Gbps for the "no lens" version. Indoor simulations showed average throughputs exceeding 10 Gbps.
- Real-time Validation: Using a 28.5 GHz SDR testbed, a stable real-time link of 2.474 Gbps was demonstrated at a distance of 70 cm using a 1x1 SULA prototype.
Conclusion
RF lens-embedded antennas offer a compelling solution to the complexity and power challenges of mmWave beamforming. While current prototypes face challenges like switch insertion loss and physical volume, they demonstrate significant potential for high-gain, high-throughput 5G and 6G applications. Future work will focus on ultra-fast beam-switching for high-mobility scenarios like Vehicle-to-Everything (V2X) communications.
Summary updated