Reliable Beam Tracking with Dynamic Beamwidth Adaptation in Terahertz (THz) Communications

Yasemin Karacora, Christina Chaccour, Aydin Sezgin, Walid Saad

Abstract

Terahertz (THz) communications (0.1–10 THz) are a cornerstone of future 6G networks, promising Terabit-per-second data rates. However, the extreme path loss at these frequencies necessitates the use of ultra-narrow "pencil beams," which are highly susceptible to outages caused by user mobility and environmental blockages. This paper presents a novel framework that dynamically adjusts beamwidth and employs event-triggered tracking to resolve the inherent brittleness of THz links. By balancing the tradeoff between high data rates and connection reliability, the proposed system achieves a 50% reduction in outages while significantly lowering signaling overhead compared to traditional periodic tracking methods.

The THz "Pencil Beam" Dilemma

The THz band offers massive bandwidth but faces significant physical challenges, including extreme free-space path loss and molecular absorption, primarily from water vapor. To maintain a viable link, systems must concentrate signal power into extremely narrow, directional beams.

While effective for throughput, these beams are fragile. Even minor micro-mobility by a user or a transient blocker (like a person walking by) can cause a total communication outage. Maintaining alignment requires frequent Channel State Information (CSI) updates, but excessive updates create a signaling overhead that consumes the very bandwidth the system aims to provide. This creates a fundamental three-way tradeoff between beam directivity (rate), beamwidth (reliability), and tracking frequency (overhead).

The fundamental tradeoff in THz communications: narrow beams provide high rates but low reliability, while wider beams improve reliability at the cost of rate.

Proposed Methodology: Dynamic Adaptation and Event-Based Tracking

To address these challenges, the authors propose a two-fold solution designed for real-time implementation:

  1. Parameterized Variable-Beamwidth Precoding: Instead of fixed-width beams, the researchers developed a beamformer based on Slepian sequences (Sinc-functions). This allows the Base Station (BS) to continuously adjust the beam's width ($v$) and shape ($\omega$) using just two scalar parameters. This approach reduces computational complexity, enabling the use of pre-calculated lookup tables to find the optimal beamwidth for any given level of user uncertainty.
  2. Event-Based Tracking via Lyapunov Optimization: Rather than relying on a fixed timer for pilot signals (periodic tracking), the system uses an "event-trigger." It monitors a "virtual queue" of the system's state and overhead. A new channel estimation is triggered only when the potential gain in reliability outweighs the cost of the overhead, or when an outage (NACK) is detected.
A typical indoor THz communication scenario where a base station must track a mobile user amidst dynamic blockers.

Key Insights and Results

The framework was evaluated using rigorous Monte-Carlo simulations incorporating the Saleh-Valenzuela channel model, HITRAN molecular absorption data at 300 GHz, and 2D Random Walk mobility models. Several key findings emerged:

  • The "Wide Beam" Safety Net: When user position uncertainty is high, a wider beam is often optimal. Although the peak signal is weaker, the increased coverage probability prevents costly outages.
  • Impact of Absorption Lines: Near specific frequencies with high molecular absorption (e.g., 325 GHz), the optimal strategy shifts toward narrower beams to "punch through" the loss, despite the increased tracking difficulty.
  • Efficiency Gains: The combined beamwidth adaptation and event-based tracking reduced outages by over 50%. The scheme achieved a 3% outage probability with only one pilot event every 23 time slots, whereas a standard periodic scheme required a pilot every 5 slots to reach the same reliability.
  • Pareto Efficiency: The system allows operators to tune the balance between rate and reliability based on the application, such as prioritizing ultra-reliability for VR or high-speed transfer for large files.

Conclusion

This research demonstrates that dynamic beamwidth adaptation and event-triggered tracking are essential for making THz communications practical. By moving away from "dumb" periodic timers and fixed beamwidths, 6G networks can maintain robust, high-speed connections even in dynamic indoor environments. Future work will explore scaling these methods to multi-user scenarios and 3D beamforming with planar arrays.

Summary updated

BibTeX
@article{karacora2023reliable,
  author = {Yasemin Karacora and Christina Chaccour and Aydin Sezgin and Walid Saad},
  title = {{Reliable Beam Tracking with Dynamic Beamwidth Adaptation in Terahertz (THz) Communications}},
  journal = {IEEE Trans. Communications},
  year = {2023},
  doi = {10.1109/tcomm.2023.3296612},
}
Figure