Recovering Compressively Sampled Signals Using Partial Support Information

Michael P. Friedlander, Hassan Mansour, Rayan Saab, Özgür Yilmaz

TL;DR

This paper introduces a weighted $\ell_1$ minimization approach for recovering signals from compressed sensing measurements, leveraging partial prior knowledge about the signal's support. The key finding is that this method offers improved recovery guarantees and error bounds compared to standard $\ell_1$ minimization, especially when the prior support information is at least 50% accurate.

What Problem Does This Paper Address?

Compressed sensing (CS) allows for reconstructing signals from far fewer measurements than traditionally required, provided the signal is sparse in some domain. Standard CS recovery typically relies on $\ell_1$ minimization, which assumes no prior knowledge about which signal components are non-zero. However, in many real-world applications (e.g., video, audio, seismic data), some prior information about the signal's structure or support (the set of non-zero coefficients) is often available. This paper addresses the challenge of effectively incorporating this partial and potentially imperfect support information into the recovery process to achieve more robust and accurate reconstructions under weaker conditions.

Methods

The core of the paper is the development and analysis of weighted $\ell_1$ minimization. Instead of minimizing the standard $\ell_1$ norm (sum of absolute values of coefficients), they minimize a weighted $\ell_1$ norm, where coefficients expected to be non-zero (based on the prior support information) are penalized less. Specifically, they assign a weight of 1 to coefficients within the estimated support and a smaller weight, $\omega \in [0, 1]$, to coefficients outside the estimated support.

The paper derives theoretical recovery guarantees for this weighted approach, showing that it provides stable and robust signal recovery. A key theoretical contribution is proving that if the estimated support is at least 50% accurate, the weighted $\ell_1$ method achieves better error bounds and requires weaker conditions on the measurement matrix (specifically, its Restricted Isometry Property or RIP) compared to standard $\ell_1$ minimization. They also analyze the case where the weight $\omega$ is zero, which corresponds to a specific prior work, and show their results hold under even weaker conditions in that scenario.

Datasets

The paper evaluates its method using:

  • Synthetic data: Generated sparse and compressible signals.
  • Real-world signals:
    • Audio signals (male and female voices).
  • Video signals (Foreman sequence at QCIF resolution, using the luma component).

The paper does not introduce new benchmark datasets but rather applies its method to established types of real-world signals.

Key Insights and Ideas

  • Partial support information is valuable: Even imperfect prior knowledge about which signal components are likely non-zero can significantly improve recovery performance.
  • Weighted $\ell_1$ is more robust: When the prior support estimate is reasonably accurate (at least 50%), the weighted $\ell_1$ method is more forgiving regarding the properties of the measurement matrix (RIP) and offers better error bounds.
  • The weight $\omega$ matters: The choice of the weight $\omega$ (between 0 and 1) is crucial. While $\omega=0$ (zero weight outside the support) is common in prior work, this paper shows that intermediate values of $\omega$ can often lead to the best practical performance, especially for compressible signals or when the support estimate is less accurate. This suggests a trade-off between penalizing off-support coefficients and the overall error bound.
  • Accuracy over size: The recovery performance is more sensitive to the accuracy of the support estimate ($\alpha$) than to its size ($\rho$).

Key Results

  • Theoretical Guarantees: The paper provides formal theorems establishing stable and robust recovery conditions for weighted $\ell_1$ minimization. These conditions are shown to be weaker than those for standard $\ell_1$ minimization when the support estimate is sufficiently accurate.
  • Improved Error Bounds: The derived upper bounds on the reconstruction error are smaller than those for standard $\ell_1$ minimization, particularly concerning the impact of measurement noise and signal compressibility.
  • Experimental Validation:
    • Numerical experiments on synthetic data demonstrate that weighted $\ell_1$ consistently outperforms standard $\ell_1$ when partial support information is available, especially as the number of measurements increases.
  • For real video signals, weighted $\ell_1$ with $\omega=0.5$ achieved an improvement of about 1 dB in PSNR compared to standard $\ell_1$, even with fewer measurements.
  • For audio signals, intermediate values of $\omega$ yielded the best SNR.
  • The experiments also highlight that the accuracy of the support estimate ($\alpha$) is more critical than its size ($\rho$).

Limitations and Future Work

  • Optimal Weight Selection: The paper acknowledges that determining the optimal weight $\omega$ is beyond the scope of the current work. While experiments suggest intermediate values are often best, a rigorous method for selecting $\omega$ is not provided.
  • Mathematical Understanding of Intermediate $\omega$: The paper offers an intuitive explanation for why intermediate $\omega$ values can be beneficial (balancing error bound constants and off-support components), but a full mathematical analysis of this behavior is noted as being beyond the paper's scope.
  • Adaptive Measurement: The current framework assumes a non-adaptive measurement process (matrix A is fixed). Future work could explore adaptive sampling strategies that leverage the support information more directly.
  • Generalization: While the paper focuses on $\ell_1$ minimization, exploring similar benefits for other sparse recovery techniques could be a future direction.

Summary updated

Abstract

We study recovery conditions of weighted l1 minimization for signal reconstruction from compressed sensing measurements when partial support information is available. We show that if at least 50% of the (partial) support information is accurate, then weighted l1 minimization is stable and robust under weaker sufficient conditions than the analogous conditions for standard l1 minimization. Moreover, weighted l1 minimization provides better upper bounds on the reconstruction error in terms of the measurement noise and the compressibility of the signal to be recovered. We illustrate our results with extensive numerical experiments on synthetic data and real audio and video signals.
BibTeX
@article{friedlander2012recovering,
  author = {Michael P. Friedlander and Hassan Mansour and Rayan Saab and Özgür Yilmaz},
  title = {{Recovering Compressively Sampled Signals Using Partial Support Information}},
  journal = {IEEE Trans. Information Theory},
  year = {2012},
  url = {https://openreview.net/forum?id=O34RH82rI2},
}
Figure