Reconfigurable Codebook-Based Beamforming for RDARS-Aided mmWave MU-MIMO Systems

Chengwang Ji, Qing Xue, Haiquan Lu, Jintao Wang, Qiaoyan Peng, Shaodan Ma, Wei Zhang

TL;DR

This paper introduces a novel Reconfigurable Codebook (RCB) and a low-overhead beam training scheme for Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) systems in mmWave MU-MIMO networks. The proposed approach significantly enhances system performance by enabling flexible configuration of RDARS elements and mitigating inter-user interference, outperforming existing DAS and RIS systems.

What Problem Does This Paper Address?

The sixth-generation (6G) wireless communication systems demand ultra-high data rates and ultra-low latency. Millimeter wave (mmWave) communication is a key enabler for 6G, but its signals suffer from severe attenuation. Distributed Antenna Systems (DAS) and Reconfigurable Intelligent Surfaces (RIS) have been proposed to overcome these limitations. However, DAS incurs high hardware costs, while RIS performance is limited by multiplicative fading.

RDARS, a hybrid architecture combining DAS and RIS, offers a promising solution by allowing elements to switch between active (connection) and passive (reflection) modes. This flexibility, however, introduces significant challenges in designing efficient beamforming and beam training strategies, especially in multi-user (MU) scenarios. Existing codebook-based methods are often too complex or not adaptable to the dynamic nature of RDARS. This paper addresses the need for an efficient and flexible beamforming and beam training framework for RDARS-aided mmWave MU-MIMO systems to maximize system performance, specifically the weighted sum rate (WSR).

Methods

The paper proposes a novel Reconfigurable Codebook (RCB) that allows for dynamic adjustment of codeword dimensions and numbers, catering to the flexible configuration of RDARS elements. This RCB is designed based on the discrete Fourier transform (DFT) and can degrade to a general beamsteering codebook for uniform element spacing.

A low-overhead beam training (BT) scheme is developed using a hierarchical 2D RCB. This scheme separates the BT process into two parts, leveraging the active and passive capabilities of RDARS elements. The BT is further optimized by considering the quasi-static nature of the BS-RDARS link and the instantaneous nature of the RDARS-UE links.

The paper then presents active and passive beamforming designs for two multiple access schemes: Time-Division Multiple Access (TDMA) and Space-Division Multiple Access (SDMA).

  • For TDMA, closed-form solutions are derived for the optimal number of RDARS transmit elements and power budget allocation to maximize WSR.
  • For SDMA, the focus is on mitigating inter-user interference (IUI) at both the BS and RDARS sides. This is achieved through an alternative codeword selection scheme at the BS and optimizing the placement and number of RDARS transmit elements to ensure orthogonality.

Datasets

Not discussed in the paper. The evaluation is based on simulations with specified system parameters.

Key Insights and Ideas

  • RDARS offers a superior trade-off: RDARS, by intelligently switching between active and passive modes, can achieve performance comparable to or better than DAS and RIS, but with potentially lower hardware costs and energy consumption.
  • Flexibility is key: The dynamic nature of RDARS elements necessitates a reconfigurable codebook (RCB) that can adapt to changing system conditions and user distributions, unlike traditional fixed codebooks.
  • Hierarchical beam training is efficient: A hierarchical approach to beam training significantly reduces overhead, which is crucial in mmWave systems with a large number of elements.
  • IUI mitigation is critical for SDMA: In SDMA, effectively managing interference between users is paramount for maximizing WSR, and the proposed methods for RDARS element placement and codeword selection are effective in this regard.
  • TDMA offers simpler optimization: The TDMA scheme, due to its single-user nature in each time slot, allows for more straightforward derivation of optimal power and element allocation, leading to high WSR.

Key Results

  • The proposed RDARS-aided system with the RCB-based beamforming and BT scheme consistently outperforms DAS and RIS-aided systems in terms of WSR across both TDMA and SDMA schemes.
  • In the TDMA scheme, the optimal number of RDARS transmit elements is found to be a=1 when N < ~c and a=0 when N > ~c, where ~c is a threshold dependent on path loss. This highlights that deploying too many active elements can be detrimental.
  • For SDMA, the proposed alternative codeword scheme at the BS provides a significant gain (up to 2 dB) compared to not using it, demonstrating its effectiveness in mitigating IUI.
  • The paper shows that the RDARS-aided system with a small number of transmit elements (e.g., a=18) can outperform RIS systems with a much larger number of passive elements and BS antennas, especially at lower transmit powers. This underscores the efficiency of RDARS.
  • The RCB scheme is shown to outperform fixed codebooks (FCB) by a considerable margin, especially at higher transmit powers, due to its ability to compensate for phase misalignment and reduce IUI.

Limitations and Future Work

  • Complexity of SDMA optimization: While the paper proposes effective algorithms, the SDMA problem remains inherently complex due to coupled variables and binary mode switching constraints.
  • Assumptions: The analysis relies on certain assumptions, such as the LoS component dominating mmWave channels and specific channel models.
  • Practical implementation challenges: The paper focuses on theoretical design and simulation. Real-world implementation might face challenges related to hardware imperfections, synchronization, and dynamic environment tracking.

The authors suggest that integrating RDARS into massive MIMO systems is a promising approach for 6G mmWave communications, implying future work could explore even larger-scale deployments and more complex scenarios. Further research could also delve into the energy efficiency and cost-effectiveness of RDARS in more detail.

Summary updated

Abstract

Reconfigurable distributed antenna and reflecting surface (RDARS) is a new architecture for the sixth-generation (6G) millimeter wave (mmWave) communications. In RDARS-aided mmWave systems, the active and passive beamforming design and working mode configuration for reconfigurable elements are crucial for system performance. In this paper, we aim to maximize the weighted sum rate (WSR) in the RDARS-aided mmWave system. To take advantage of RDARS, we first design a reconfigurable codebook (RCB) in which the number and dimension of the codeword can be flexibly adjusted. Then, a low overhead beam training scheme based on hierarchical search is proposed. Accordingly, the active and passive beamforming for data transmission is designed to achieve the maximum WSR for both space-division multiple access (SDMA) and time-division multiple access (TDMA) schemes. For the TDMA scheme, the optimal number of RDARS transmit elements and the allocated power budget for WSR maximization are derived in closed form. Besides, the superiority of the RDARS is verified and the conditions under which RDARS outperforms RIS and DAS are given. For the SDMA scheme, we characterize the relationship between the number of RDARS connected elements and the user distribution, followed by the derivation of the optimal placement positions of the RDARS transmit elements. High-quality beamforming design solutions are derived to minimize the inter-user interference (IUI) at the base station and RDARS side respectively, which nearly leads to the maximal WSR. Finally, simulation results confirm our theoretical findings and the superiority of the proposed schemes.
BibTeX
@article{ji2026reconfigurable,
  author = {Chengwang Ji and Qing Xue and Haiquan Lu and Jintao Wang and Qiaoyan Peng and Shaodan Ma and Wei Zhang},
  title = {{Reconfigurable Codebook-Based Beamforming for RDARS-Aided mmWave MU-MIMO Systems}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2026},
  doi = {10.1109/twc.2025.3637814},
}
Figure