Realization Mechanism and Development of Permanent Magnetic Levitation: A Review

Qianchuan Zhao, Feng Sun, Pei Wenzhe, 靳俊杰 Jin Junjie, Xu Fangchao, Koichi Oka, Suyuan YuJournal of Mechanical Engineering 2023 · DOI

Abstract

Permanent Magnetic Levitation (PML) technology utilizes the interaction between magnets or between magnets and ferromagnetic materials to achieve contactless support. Characterized by zero friction and low energy consumption, PML has seen significant performance improvements due to the development of high-remanence rare-earth permanent magnets. This review clarifies the underlying mechanisms of PML, systematically categorizes passive and active levitation technologies, and examines key strategies such as air-gap adjustment and magnetic source regulation. Furthermore, it addresses technical challenges in magnetic circuit design and precision modeling, while outlining future applications in gravity compensation, micro-bearings, and vibration isolation.

Introduction: The Friction Bottleneck

Traditional mechanical bearings are inherently limited by friction, wear, and the necessity for lubrication. These factors pose significant barriers in high-speed applications or ultra-clean environments, such as semiconductor manufacturing. While electromagnetic levitation (EML) and superconducting levitation offer contactless alternatives, they often require high power inputs or complex cryogenic systems.

PML serves as a compelling "middle ground," utilizing permanent magnets to provide lifting force without continuous power consumption. However, engineering stable PML systems is challenging due to Earnshaw’s Theorem, which states that a collection of magnetic bodies cannot be maintained in a stable stationary equilibrium through static magnetic forces alone. To bypass this instability, researchers employ either dynamic motion (passive levitation) or feedback-driven actuators (active levitation).

Classification of Levitation Mechanisms

The realization of PML is generally divided into two main branches based on how they achieve stability:

  1. Passive Levitation: These systems rely on the inherent dynamics of the setup. Examples include the gyroscopic stability of magnetic tops (the "Levitron") or the use of eddy currents generated by relative motion between magnets and conductors.
  2. Active Levitation: These systems utilize sensors and actuators to maintain equilibrium. The review identifies three primary active strategies:
  3. Air Gap Adjustment: Physically modulating the distance between magnets to vary force.
  4. Magnetoresistive Modulation: Using a movable ferromagnetic shunt to steer magnetic flux.
  5. Magnetic Source Regulation: Rotating magnets within a yoke to adjust the effective flux delivered to the target.
Classification of magnetic levitation mechanisms based on material properties and control methods

Key Technical Insights

The "Motion" Requirement

Stability in PML is inherently dynamic. Whether through the high-speed rotation of a train or the spin of a toy top, motion provides the necessary change in state to overcome static instability.

Zero-Power Levitation

A breakthrough in PML research is the concept of "zero-power" consumption. By integrating mechanical springs to balance the static weight of a levitated object at a specific equilibrium point, the active control system only expends energy to counteract external disturbances rather than to maintain the lift itself. This drastically improves energy efficiency compared to pure EML systems.

Strategic Material Advantage

The advancement of PML is inextricably linked to the evolution of rare-earth materials like Neodymium Iron Boron (NdFeB). With China holding the world's largest rare-earth reserves, the development of high-performance PML systems represents a significant strategic and technological opportunity.

Applications and Future Outlook

PML technology is transitioning from theoretical research to industrial reality. Current applications range from the "Xingguo" permanent magnet maglev train to medical breakthroughs like third-generation implantable artificial hearts, where contactless operation prevents blood damage.

Broad application prospects of permanent magnetic levitation technology across various industries

Despite this progress, several hurdles remain. Modeling magnetic leakage and the non-linear properties of soft magnetic materials requires high-precision Finite Element Analysis (FEA). Additionally, the mechanical bandwidth of actuators in active PML systems currently limits response speeds. Future research is expected to focus on "intelligent" control algorithms—such as robust H∞ control and neural networks—to manage these non-linearities and enable the scaling of PML for heavy industrial machinery and aerospace components.

Summary updated

Abstract

摘要: 永磁悬浮技术利用磁体与磁体或铁磁体之间力的作用实现无接触支撑,具有无摩擦、低能耗等显著特点。随着稀土永磁材料的发展,具有高剩磁、高矫顽力、高磁能积的永磁体大幅提高了系统的承载性能,国内外学者相继开展了永磁悬浮技术的研究工作。我国的稀土储量居世界首位,发展永磁悬浮技术具有天然优势和重要意义。首先,明晰了永磁悬浮技术的机理和特点;其次,系统性回顾了永磁被动悬浮和永磁主动悬浮技术的发展历史,并重点阐述了气隙调节式、磁阻调制式、磁源调整式三种永磁主动悬浮系统的磁路结构、悬浮特性及研究现状;再次,分析了磁路设计与优化、磁力精确建模、系统性能与控制方法等技术难点,并提出相应的解决策略;最后,展望了永磁悬浮技术在重力补偿器、轻载微型轴承、低频隔振等领域的未来应用前景及发展趋势。
BibTeX
@article{zhao2023realization,
  author = {Qianchuan Zhao and Feng Sun and PEI Wenzhe and 靳俊杰 Jin Junjie and XU Fangchao and Koichi Oka and Suyuan Yu},
  title = {{Realization Mechanism and Development of Permanent Magnetic Levitation: A Review}},
  journal = {Journal of Mechanical Engineering},
  year = {2023},
  doi = {10.3901/jme.2023.17.189},
}
Figure