Abstract
The cell-free (CF) massive multiple-input multiple-output (MIMO) system is considered a cutting-edge technology in next-generation mobile communication due to its ability to provide high-performance coverage seamlessly and uniformly. This paper aims to mitigate the negative impact of channel aging due to the movement of user equipment in CF massive MIMO systems by utilizing rate-splitting (RS) technology. Taking into account the outdated channel state information, we obtain the achievable sum spectral efficiency (SE) of the RS-assisted CF massive MIMO system, where the private messages can directly adopt conventional maximum ratio, local minimum mean square error (MMSE), and centralized MMSE precoding schemes. Moreover, we propose a bisection-based precoding scheme that maximizes the minimum SE of common messages, which outperforms the superposition-based and random precoding schemes and exhibits strong robustness in complex mobile scenarios. Furthermore, we derive a novel closed-form sum SE expression for the considered system. The results demonstrate that RS technology can mitigate interference in mobile CF massive MIMO systems, improving overall system performance.
1. Introduction
Cell-Free (CF) Massive MIMO is a pivotal architecture for 6G networks, utilizing a large number of distributed Access Points (APs) to provide uniform service to users without traditional cell boundaries. However, the performance of these systems is highly sensitive to the accuracy of Channel State Information (CSI). In high-mobility scenarios, the time delay between channel estimation and data transmission leads to "channel aging," where the CSI becomes outdated. This mismatch causes significant multi-user interference, severely degrading the sum Spectral Efficiency (SE). This study investigates Rate-Splitting (RS) as a robust interference management strategy to combat these aging effects.
2. Rate-Splitting in CF Massive MIMO
To address the interference caused by outdated CSI, we implement a Rate-Splitting strategy. In this framework, each user's message is split into a common part and a private part.
- Common Message: The common parts of all users are combined into a single message, encoded using a codebook known to all users. This message is designed to be decodable by all users even under degraded channel conditions.
- Private Message: Each user's private part is encoded independently and is intended only for that specific user.
At the receiver, Successive Interference Cancellation (SIC) is employed: users first decode the common message, treat the private messages as noise, and then subtract the common message to decode their respective private messages. This approach allows the common message to act as a "buffer," absorbing a portion of the multi-user interference that conventional systems cannot handle.
3. Proposed Precoding and Performance Analysis
We evaluate several precoding schemes for private messages, including Maximum Ratio (MR), Local MMSE, and Centralized MMSE. A key contribution of this work is the development of a bisection-based precoding scheme for the common message. This scheme optimizes the max-min SE of the common message, ensuring reliable delivery across the network despite channel aging.
Furthermore, we derive a novel closed-form expression for the sum SE using the "Use-and-Then-Forget" (UatF) bound. This analytical tool allows for efficient system performance prediction across various mobility levels and power configurations without the need for extensive Monte Carlo simulations.
4. Key Results and Discussion
4.1 Impact of Channel Aging Over Time
As the time index $n$ increases, the correlation between the estimated and actual channel decreases, leading to a drop in SE. As shown in Figure 1, the RS-assisted system maintains a significantly higher sum SE compared to the conventional system without RS, particularly at higher velocities ($v = 30$ m/s). The common message effectively mitigates the interference floor that typically limits performance as CSI ages.
4.2 Overcoming Spectral Efficiency Saturation
In conventional CF Massive MIMO, increasing transmit power eventually leads to SE saturation because the interference power scales at the same rate as the signal power when CSI is imperfect. RS technology breaks this bottleneck.
As illustrated in Figure 5, while the "Without RS" curves flatten out at high transmit powers, the "With RS" curves continue to rise. This is because the power allocated to the common message can be scaled to manage the increasing interference, demonstrating the high-power robustness of the RS framework in both stationary and high-mobility environments.
5. Conclusion
This paper demonstrates that Rate-Splitting is a powerful tool for enhancing the reliability of CF Massive MIMO systems under channel aging. By intelligently splitting messages and employing optimized precoding, RS-assisted systems can maintain high spectral efficiency in mobile environments where conventional precoding fails. Future work will explore dynamic power-splitting optimization and the integration of RS in uplink scenarios.
Summary updated