Radio-frequency inverters with transmission-line input networks

J. Phinney, David J. Perreault, Jeffrey H. Lang

Abstract

A soft-switching inverter topology (the Class Φ) is presented which draws dc source current through a transmission line or a lumped-network approximation of a distributed line. By aligning the inverter switching frequency just below the line's λ/4-wave resonance, the Class Φ topology enforces odd-and even-harmonic content in its drain voltage and input current, respectively. The symmetrizing action of the transmission-line dynamics results in natural square-wave operation of the switch, reducing the inverter stresses (relative to a Class E) for a given power throughput. The inverter waveforms and normalized power-output capability are analyzed in simple terms, and supported by measurements of an inverter built around a length of distributed line, and an inverter incorporating a lumped L-C ladder network. The latter implementation is constructed with air-core magnetics and inter-layer capacitances that are integrated into the thickness of a printed-circuit board. A comparison with a Class Ε inverter of similar size and ratings demonstrates the small passive-component values and manufacturing advantages afforded by the Class Φ topology.
BibTeX
@article{phinney2007radio,
  author = {J. Phinney and David J. Perreault and Jeffrey H. Lang},
  title = {{Radio-frequency inverters with transmission-line input networks}},
  journal = {IEEE Transactions on Power Electronics},
  year = {2007},
  doi = {10.1109/tpel.2007.900465},
}

Loading related content...

Figure