Prismatic Soft Actuator Augments the Workspace of Soft Continuum Robots

Philipp Wand, Oliver Fischer, Robert K. Katzschmann

TL;DR

This paper introduces a novel prismatic soft actuator that, when integrated with a soft continuum robot, significantly expands its operational workspace. This enhancement enables the robot to perform previously impossible manipulation tasks, bridging the gap between soft robots' safety advantages and the dexterity required for practical applications.

What Problem Does This Paper Address?

Soft continuum robots, known for their compliance and safety, are ideal for human-robot interaction. However, their typical design, based on stacked bending segments, confines them to a limited, hemispherical workspace. This restriction severely limits their utility for general manipulation tasks, such as picking and placing objects in varied locations or reaching into containers. While adding more bending segments can slightly increase workspace, it also introduces complexities like increased model error and reduced performance. The paper aims to overcome this workspace limitation by introducing a new actuation mechanism that complements the bending motion of existing soft robots.

Methods

The core innovation is a bidirectional prismatic soft actuator designed to be mounted at the base of a soft continuum robot. This actuator consists of:

  • Pneumatic Artificial Muscles (PAMs): These are the primary force generators, contracting when pressurized.
  • A Piston: This component guides the linear motion and, when pressurized, can provide a downward pushing force, making the actuator back-driveable.
  • Lever Arms: These act as mechanical multipliers, increasing the contraction of the PAMs and thus the extension of the prismatic joint.

The design prioritizes:

  • Modularity: Easy integration and swapping of components.
  • Model Compatibility: The actuator's dynamics are designed to be compatible with common soft robot kinematic and dynamic models (like Piecewise Constant Curvature).
  • Function Preservation: The actuator is laterally stiff but axially compliant (back-driveable), maintaining the robot's inherent safety.

The authors developed a dynamic model for the combined system, incorporating the prismatic joint into the existing soft robot's model. They then implemented a proportional-derivative (PD) controller with an inverse dynamics formulation to control the system, translating desired task-space accelerations into pneumatic pressure commands.

Datasets

Not discussed in the paper. The authors generated their own experimental data through system operation and motion capture.

Key Insights and Ideas

  • Prismatic Actuation as a Workspace Extender: The paper demonstrates that a linear prismatic joint, rather than just adding more bending segments, is a more effective way to significantly increase a soft robot's workspace volume.
  • PAMs and Piston for Bidirectional Control: Combining PAMs for pulling and a pressurized piston for pushing creates a back-driveable prismatic actuator, crucial for safe interaction and precise control.
  • Modularity is Key for Practical Soft Robotics: The design's modularity allows for easier integration and future improvements, paving the way for more practical soft robotic systems.
  • Bridging the Gap to Industrial Tasks: By expanding the workspace, soft robots can now tackle tasks that were previously exclusive to rigid manipulators, making them more viable for real-world applications.

Key Results

  • Workspace Increase: The addition of the prismatic joint increased the task space volume by 116% (a factor of 2.2).
  • Task Performance: The enhanced workspace enabled the robot to perform tasks previously impossible, such as picking and placing objects at different positions on a surface and grabbing an object from within a container.
  • Trajectory Tracking: The system demonstrated successful dynamic trajectory tracking (helix, inclined circle, line) with an average tip error of 2.1 cm, 2.5 cm, and 1.6 cm, respectively. This is comparable to or better than previous results for similar soft robots without the prismatic joint.
  • Payload Capacity: The prismatic joint allowed the robot to grip and lift a syringe weighing up to 200g when fully contracted.
  • Lateral Stiffness: The system maintained good lateral stiffness, with minimal base movement even when the prismatic joint was fully extended.

Limitations and Future Work

  • Workspace Expansion Potential: While a significant improvement, the authors suggest that further increasing the range of the soft prismatic joint could be achieved by using larger PAMs or higher lever arm ratios.
  • Piston Lateral Resistance: The piston showed less lateral resistance when fully extended. Elongating the inner piston could mitigate this.
  • Model Accuracy: To further decrease tracking error, the authors propose improving the dynamic model of both the manipulator and the soft joint.
  • Future Applications: The work promotes the use of integrated and modular soft robotic systems for practical manipulation applications in human-centered environments, suggesting a future where soft robots can replace rigid manipulators in tasks requiring human-robot interaction due to their inherent safety and compliance.

Summary updated

Abstract

Soft robots are promising for manipulation tasks thanks to their compliance, safety, and high degree of freedom. However, the commonly used bidirectional continuum segment design means soft robotic manipulators only function in a limited hemispherical workspace. This work increases a soft robotic arm's workspace by designing, fabricating, and controlling an additional soft prismatic actuator at the base of the soft arm. This actuator consists of pneumatic artificial muscles and a piston, making the actuator back-driveable. We increase the task space volume by 116%, and we are now able to perform manipulation tasks that were previously impossible for soft robots, such as picking and placing objects at different positions on a surface and grabbing an object out of a container. By combining a soft robotic arm with a prismatic joint, we greatly increase the usability of soft robots for object manipulation. This work promotes the use of integrated and modular soft robotic systems for practical manipulation applications in human-centered environments.
BibTeX
@inproceedings{wand2022prismatic,
  author = {Philipp Wand and Oliver Fischer and Robert K. Katzschmann},
  title = {{Prismatic Soft Actuator Augments the Workspace of Soft Continuum Robots}},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year = {2022},
  url = {https://openreview.net/forum?id=zaG91UF6Zx},
}
Figure