Preparation and properties of a carbon nanotube-based nanocomposite photoanode for dye-sensitized solar cells

Chuan-Yu Yen, Yufeng Lin, Shu‐Hang Liao, Cheng-Chih Weng, Ching-Chun Huang, Yi-Hsiu Hsiao, M. Chen‐Chi, Min‐Chao Chang, Hsin Shao, Ming-Chi Tsai, Chien‐Kuo Hsieh, Chuen-Horng Tsai, Fang-Bor WengNanotechnology 2008 · DOI

Abstract

This study fabricates dye-sensitized solar cells (DSSCs) based on TiO(2)/multi-walled carbon nanotube (MWCNT) nanocomposite photoanodes obtained by the modified acid-catalyzed sol-gel procedure. Results show that incorporating MWCNTs into a TiO(2)-based electrode efficiently improves the physicochemical properties of the solar cell. The results of dye adsorption and cell performance measurements indicate that introducing MWCNTs would improve the roughness factor (from 834 to 1267) of the electrode and the charge recombination of electron/hole (e(-)/h(+)) pairs. These significant changes could lead to higher adsorbed dye quantities, photocurrent and DSSC cell performance. Nevertheless, a higher loading of MWCNTs causes light-harvesting competition that affects the light adsorption of the dye-sensitizer, and consequently reduces the cell efficiency. This study suggests an optimum MWCNT loading in the electrode of 0.3 wt%, and proposes a sol-gel synthesis procedure as a promising method of preparing the TiO(2)-based nanocomposite.
BibTeX
@inproceedings{yen2008preparation,
  author = {Chuan-Yu Yen and Yufeng Lin and Shu‐Hang Liao and Cheng-Chih Weng and Ching-Chun Huang and Yi-Hsiu Hsiao and M. Chen‐Chi and Min‐Chao Chang and Hsin Shao and Ming-Chi Tsai and Chien‐Kuo Hsieh and Chuen-Horng Tsai and Fang-Bor Weng},
  title = {{Preparation and properties of a carbon nanotube-based nanocomposite photoanode for dye-sensitized solar cells}},
  booktitle = {Nanotechnology},
  year = {2008},
  doi = {10.1088/0957-4484/19/37/375305},
}

Loading related content...

Figure