Abstract
In this work, we study the performance of predictor antenna (PA) systems using hybrid automatic repeat request (HARQ). Here, the PA system is referred to as a system with two sets of antennas on the roof of a vehicle. In this setup, the PA positioned in the front of the vehicle can be used to predict the channel state information at the transmitter (CSIT) for data transmission to the receive antenna (RA) that is aligned behind the PA. Considering spatial mismatch, due to the vehicle mobility, we derive closed-form expressions for the optimal power allocation and the minimum average power of the PA systems under different outage probability constraints. The results are presented for different types of HARQ protocols and we study the effect of different parameters on the performance of PA systems. As we show, our proposed approximation scheme enables us to analyze PA systems with high accuracy. Moreover, for different vehicle speeds, we show that HARQ-based feedback can reduce the outage-limited power consumption of PA systems by orders of magnitude.
The Challenge of High-Mobility Connectivity
Providing reliable, high-speed connections to moving vehicles—such as cars, buses, and trains—is a cornerstone of 5G and future wireless standards. To achieve this, the Base Station (BS) requires accurate Channel State Information at the Transmitter (CSIT). However, in high-mobility scenarios, the channel changes rapidly. By the time the BS processes the information and transmits data, the original channel state is often outdated.
To combat this, researchers have developed Predictor Antenna (PA) systems. This setup utilizes two antennas aligned front-to-back on a vehicle's roof. The front antenna (the PA) samples the channel and sends this information to the BS. The BS then uses this prediction to transmit data to the rear Receive Antenna (RA) when it reaches the same spatial position.
Despite its promise, the PA system faces two primary hurdles:
- Spatial Mismatch: Fluctuations in vehicle speed and processing delays mean the RA may not perfectly align with the spatial point sampled by the PA, leading to inaccurate CSIT and packet loss.
- Spectral Underutilization: Traditionally, the front PA is used solely for channel estimation, leaving a potential data-receiving antenna idle.
Proposed HARQ-based PA Protocol
This paper proposes a novel HARQ-based PA system that leverages the front antenna for both data reception and channel estimation. The protocol operates in three distinct phases:
- Initial Transmission: The BS sends pilots and encoded data to the front PA. The PA attempts to decode the data while simultaneously estimating the channel.
- Feedback Loop: If decoding is successful, the PA sends an ACK. If it fails, it sends a NACK along with high-accuracy quantized CSI back to the BS.
- Retransmission with Power Allocation: Upon receiving a NACK, the BS retransmits the data to the rear RA. Crucially, the BS uses the CSI provided by the PA to dynamically adapt its transmission power, compensating for any spatial mismatch.
To optimize this system, the authors minimized average transmission power subject to strict outage probability constraints. They developed tight closed-form approximations using the Lambert W function to evaluate two standard protocols: Repetition Time Diversity (RTD) and Incremental Redundancy (INR).
Performance Evaluation and Key Results
The proposed system was evaluated through theoretical analysis and Monte Carlo simulations. The results demonstrate that the physical delay between the front and rear antennas passing the same spatial point provides an ideal window for HARQ feedback and processing.
Key findings include:
- Massive Power Savings: At a strict outage probability constraint of $10^{-5}$, the power-adaptive PA-HARQ scheme reduces the required Signal-to-Noise Ratio (SNR) by 25 dB for RTD and 30 dB for INR compared to systems without retransmission.
- INR Superiority: As expected, Incremental Redundancy (INR) outperforms Repetition Time Diversity (RTD) in terms of power efficiency, though the gap narrows at lower data rates.
- Mathematical Accuracy: The derived closed-form approximations for minimum required power align closely with numerical simulations across various speeds and data rates, providing a robust tool for system design.
Conclusion and Future Outlook
By transforming the predictor antenna into a dual-purpose component and integrating adaptive power allocation, this protocol significantly enhances the reliability and efficiency of vehicular communications. While current results assume perfect CSIT feedback and ignore peak power constraints, they establish a powerful baseline. Future research will explore the impact of limited feedback quantization and the performance of the protocol in non-stationary, highly dynamic fading environments.
Summary updated