Potassium permanganate is an excellent alternative to osmium tetroxide in freeze-substitution

Martin Schauflinger, Tim Bergner, Gregor Neusser, Christine Kranz, Clarissa ReadHistochemistry 2022 · DOI

Abstract

High-pressure freezing followed by freeze-substitution is a valuable method for ultrastructural analyses of resin-embedded biological samples. The visualization of lipid membranes is one of the most critical aspects of any ultrastructural study and can be especially challenging in high-pressure frozen specimens. Historically, osmium tetroxide has been the preferred fixative and staining agent for lipid-containing structures in freeze-substitution solutions. However, osmium tetroxide is not only a rare and expensive material, but also volatile and toxic. Here, we introduce the use of a combination of potassium permanganate, uranyl acetate, and water in acetone as complementing reagents during the freeze-substitution process. This mix imparts an intense en bloc stain to cellular ultrastructure and membranes, which makes poststaining superfluous and is well suited for block-face imaging. Thus, potassium permanganate can effectively replace osmium tetroxide in the freeze-substitution solution without sacrificing the quality of ultrastructural preservation.

Introduction

Visualizing the intricate ultrastructure of a cell—such as the double membranes of mitochondria or the complex folds of the Golgi apparatus—requires high-resolution electron microscopy (EM). Because biological tissues consist primarily of light elements, they lack natural contrast under an electron beam. To overcome this, researchers typically use High-Pressure Freezing (HPF) followed by Freeze-Substitution (FS), where ice is replaced by organic solvents containing heavy metal stains.

For decades, osmium tetroxide ($OsO_4$) has been the "gold standard" reagent due to its excellent lipid-binding properties. However, $OsO_4$ is highly toxic, volatile, and expensive. This study presents a safer, cost-effective alternative using potassium permanganate ($KMnO_4$) that maintains, and in some cases exceeds, the staining quality of traditional methods.

Methodology

The researchers developed a novel freeze-substitution "cocktail" consisting of 0.05% $KMnO_4$, 0.1–0.2% uranyl acetate (UA), and 2–5% water in an acetone solvent. To prevent the $KMnO_4$ and UA from precipitating at room temperature, the authors utilized a layered freezing technique: the UA/acetone solution was frozen solid first, and the $KMnO_4$ was layered on top. The reagents only interacted at the sub-zero temperatures required for freeze-substitution.

The method was validated across three biological models: human alveolar basal epithelial cells (A549), human foreskin fibroblasts (HFF), and yeast (Saccharomyces cerevisiae). Imaging was performed using Transmission Electron Microscopy (TEM) and Focused Ion Beam Scanning Electron Microscopy (FIB-SEM).

Results and Discussion

The synergistic combination of $KMnO_4$ and UA proved essential for high-quality membrane contrast. While neither reagent alone provided sufficient staining, their interaction allowed manganese to bind specifically to membrane structures. Furthermore, the addition of 2–5% water was critical for differentiating organelles from the cytoplasmic background, preventing a "muddy" appearance.

TEM micrograph of a cell stained with the KMnO4 cocktail, highlighting the clear visualization of the Golgi apparatus (Go) and mitochondria (Mi).

The resulting contrast was often stronger than that achieved with standard osmium protocols, making features easily distinguishable without the need for additional post-staining of sections. Despite $KMnO_4$ being a strong oxidizer, the low-temperature protocol preserved delicate structures like ribosomes and the rough endoplasmic reticulum (rER) with high fidelity.

High-magnification TEM image showing the preservation of the rough endoplasmic reticulum (rER) and mitochondrial (Mi) membranes.

The method also demonstrated excellent compatibility with FIB-SEM block-face imaging, providing high conductivity and resolution in 3D reconstructions.

Conclusion and Limitations

Potassium permanganate serves as a highly effective, safer alternative to osmium tetroxide for freeze-substitution. However, the process is temperature-sensitive; samples must be kept slightly above 0°C at the end of the run to ensure staining, but reaching room temperature can cause overstaining. Additionally, while it eliminates the need for toxic osmium, the protocol still utilizes uranyl acetate, which is radioactive and subject to specific safety regulations. Future work may focus on identifying non-radioactive partners for $KMnO_4$ to further improve the safety profile of the technique.

Summary updated

Abstract

High-pressure freezing followed by freeze-substitution is a valuable method for ultrastructural analyses of resin-embedded biological samples. The visualization of lipid membranes is one of the most critical aspects of any ultrastructural study and can be especially challenging in high-pressure frozen specimens. Historically, osmium tetroxide has been the preferred fixative and staining agent for lipid-containing structures in freeze-substitution solutions. However, osmium tetroxide is not only a rare and expensive material, but also volatile and toxic. Here, we introduce the use of a combination of potassium permanganate, uranyl acetate, and water in acetone as complementing reagents during the freeze-substitution process. This mix imparts an intense en bloc stain to cellular ultrastructure and membranes, which makes poststaining superfluous and is well suited for block-face imaging. Thus, potassium permanganate can effectively replace osmium tetroxide in the freeze-substitution solution without sacrificing the quality of ultrastructural preservation.
BibTeX
@inproceedings{schauflinger2022potassium,
  author = {Martin Schauflinger and Tim Bergner and Gregor Neusser and Christine Kranz and Clarissa Read},
  title = {{Potassium permanganate is an excellent alternative to osmium tetroxide in freeze-substitution}},
  booktitle = {Histochemistry},
  year = {2022},
  doi = {10.1007/s00418-021-02070-0},
}
Figure