Abstract Fragmentation analysis is a critical component of mining operations, influencing blasting efficiency and downstream processing. Traditional methods rely on manual placement of scale objects on hazardous rock piles to calibrate 2D imagery. This paper presents an automated alternative using Unmanned Aerial Vehicles (UAVs) and Structure-from-Motion (SfM) to generate 3D point clouds. By projecting camera rays onto these digital surfaces, the system calculates image scale without physical intervention. Experimental results in a controlled environment demonstrate that this method achieves measurement accuracy within 10% of ground truth sieve analysis, offering a safer and more robust solution for the minerals industry.
Introduction
In the mining industry, measuring the size distribution of rocks post-blast—known as fragmentation analysis—is vital for operational optimization. Improperly sized fragments can lead to crusher damage or excessive energy consumption. The current industry standard involves 2D photography calibrated by physical "scale objects" (e.g., basketballs) placed manually on rock piles. This practice poses significant safety risks due to unstable terrain and potential undetonated explosives. Furthermore, traditional 2D analysis assumes a flat surface, leading to inaccuracies when the scale object and the rocks are on different elevations or slopes.
Methodology
The proposed workflow utilizes a monocular camera mounted on a UAV to eliminate the need for manual scaling. The process begins with the UAV capturing overlapping images to generate a 3D point cloud via Structure-from-Motion (SfM). Subsequently, high-resolution analysis photos are taken, with the UAV logging its precise position and orientation.
As shown in Figure 4, the system uses the camera's intrinsic and extrinsic parameters to project rays from the image corners into the 3D world frame. The scale is determined by calculating the distance between the points where these rays intersect the 3D point cloud surface. This method accounts for the actual geometry of the pile, moving beyond the "flat earth" assumption of traditional 2D scaling.
Results and Analysis
The method was validated in a laboratory setting using a rock pile with a known size distribution determined by sieve analysis. The point-cloud-based scaling was integrated with standard fragmentation software to automate rock delineation.
The automated system (Figure 6) produced results within 10% of the ground truth sieve analysis. Statistical evaluation showed a 6% improvement in accuracy over traditional manual scaling methods. While the SfM processing adds approximately 5.5 minutes to the workflow, this is offset by the elimination of site hazards and the increased reliability of the data.
Conclusion
This research demonstrates that UAV-based SfM can serve as a precise metrology tool for fragmentation analysis. By replacing physical scale objects with a 3D geometric approach, the mining industry can improve both worker safety and data quality. Future work will focus on adapting the system to real-world mining environments where GPS noise and varying lighting conditions present additional challenges.
Summary updated