Plug in repetitive control for industrial robotic manipulators

C. Cosner, G. Anwar, Masayoshi Tomizuka

Abstract

The implementation of plug-in repetitive control on the direct drive axis of a prototype GMF A500 robot is considered. Plug-in repetitive control was developed and implemented using an IBM AT. A multirate sampling algorithm was designed to reduce the memory requirements of repetitive control. A microcontroller board based on the Intel 8096 was designed so that plug-in repetitive control could be applied from a small unit embedded within the KAREL controller. In each application, experimental results show that the tracking error is smoothly absorbed in a few cycles.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>
BibTeX
@inproceedings{cosner1990plug,
  author = {C. Cosner and G. Anwar and Masayoshi Tomizuka},
  title = {{Plug in repetitive control for industrial robotic manipulators}},
  booktitle = {IEEE International Conference on Robotics and Automation},
  year = {1990},
  url = {https://openreview.net/forum?id=EDwQzH_lEN},
}

Loading related content...

Figure